Brodit
Mobile Phone
Holder with Pass-Through Connector
for
Apple
iPhone 3GS
Stock : 4
Item No. :
516042
£
56.11
inc. Vat
For a more secure upright and horizontal position. Adjustable holder, fits devices with skins.
This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder is adjustable and fits devices with skins. The holder provides a more secure upright and horizontal position than a standard holder.
The holder is equipped with a pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner look. (Cable not included)
The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
Designed specifically for the iPhone with SKINS or CASES by Brodit to use in portrait or LANDSCAPE mode for SatNav apps such as TomTom, Navigon or CoPilot etc, as the extra supporting arm gives peace of mind in landscape mode or get 915290 if you dont need the supporting arm
Brodit
Mobile Phone
Active Holder Tilt Swivel
for
Apple
iPhone 3GS
Stock : 6
Item No. :
521023
£
54.44
inc. Vat
With cig-plug and USB cable. For a more secure upright and horizontal position. Padded.
This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder. By using an active holder you will always have a fully charged battery. The holder provides a neat and easy installation and the fact that the cable exits from the cab gives a cleaner look. The holder also provides a more secure upright and horizontal position than a standard active holder.
The active holder comes with a USB plug at the end of the cable, which is plugged into a power adapter for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB stereo interface you can disconnect the power adapter and connect holder USB plug directly to the stereo USB port for charging and playing music from the iPhone.
Your iPhone automatically connects to the charging connector every time you dock it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, which means you can adjust the angle of the device for better viewing and to avoid light reflection on the screen.
Designed specifically for the iPhone by Brodit to use in portrait or LANDSCAPE mode for SatNav apps such as TomTom, Navigon or CoPilot etc, as the extra supporting arm gives peace of mind in landscape mode or get 907255 if you dont need the supporting arm
Brodit
Mobile Phone
Active Holder Tilt Swivel
for
Apple
iPhone 3GS
Stock : 5
Item No. :
521106
£
52.96
inc. Vat
With cig-plug and USB cable. Adjustable holder, fits devices with skins.
Use an active holder for your iPhone while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.
The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable from Griffin (PowerJolt). The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
Brodit
Mobile Phone
Active Holder Tilt Swivel
for
Apple
iPhone 3GS
Stock : 5
Item No. :
527023
£
57.96
inc. Vat
For fixed installation. 2A charger. For a more secure upright and horizontal position.
The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.
Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.
When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.
Brodit
Mobile Phone
Active Holder Tilt Swivel
for
Apple
iPhone 3GS
Stock : 5
Item No. :
527106
£
57.96
inc. Vat
For fixed installation. 2A charger. Adjustable holder, fits devices with skins.
The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.
Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.
Brodit
Mobile Phone
Active Holder Tilt Swivel
for
Apple
iPhone 3GS
Stock : 7
Item No. :
527117
£
57.96
inc. Vat
For fixed installation. 2A charger.
The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.
Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.
The ProClip is a mounting bracket for the Renault Avantime's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Renault Avantime. Made in black ABS plastic. Comes with detailed instructions.
Apple iPhone 3G Holder with Pass-Through Connector
Stock : 6
Item No. : 915290
£ 52.02 incl. Vat
Click Image to enlarge
Adjustable holder, fits devices with skins.
Holder with pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. (Cable not included)
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
BMW 520-540-M5 E39 ProClip Center mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 852280
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the BMW 520-540-M5 E39's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 520-540-M5 E39. Made in black ABS plastic. Comes with detailed instructions.
BMW 520-540-M5 E39 ProClip Angled mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 852806
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the BMW 520-540-M5 E39's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 520-540-M5 E39. Made in black ABS plastic. Comes with detailed instructions.
Nissan 350 Z ProClip Center mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 653250
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Nissan 350 Z's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Nissan 350 Z. Made in black ABS plastic. Comes with detailed instructions.
Nissan Navara ProClip Angled mount
Stock : 1
Item No. : 653614
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Nissan Navara's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Nissan Navara. Made in black ABS plastic. Comes with detailed instructions.
Ford Galaxy ProClip Angled mount
Stock : 3
Item No. : 653866
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Ford Galaxy's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Galaxy. Made in black ABS plastic. Comes with detailed instructions.
BMW Compact ProClip Angled mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 652600
£ 15.99 incl. Vat
Click Image to enlarge
THIS PROCLIP HAS BEEN DISCONTINUED PLEASE ORDER 652805
The ProClip is a mounting bracket for the BMW Compact's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW Compact. Made in black ABS plastic. Comes with detailed instructions.
Volvo C30 ProClip Center mount
Stock : 1
Item No. : 653360
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Volvo C30's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo C30. Made in black ABS plastic. Comes with detailed instructions.
Mazda RX 8 ProClip Center mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 653301
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Mazda RX 8's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda RX 8. Made in black ABS plastic. Comes with detailed instructions.
Click Image to enlarge
