Brodit ProClip and Holders - Dedicated UK Supplier

STEP 1- Choose the Brodit Holder

Brodit Mobile Phone  Passive holder for Nokia  5800

Stock : 1 - 3 [ call to confirm ]

Item No. : 870288

inc. Vat

When keeping your Nokia 5800 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 5800 when it is in the holder. Accommodates all battery sizes. Attach onto a ProClip Mounting Platform.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. Always within easy reach and gripped by a cradle super strong, your mobile will stay put even on the most cobbled of city streets. Have a PDA, Bluetooth GPS, Two (2) Way Radio Mobile? Once mounted, this kit will accommodate all battery sizes of all of these devices and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Place your device in the cradle at a vertical, closed, open or horizontal position and see if this isn't the most secure car kit you have ever tried.

Item No :870288

STEP 1- Choose the Brodit Holder

Brodit Mobile Phone  Passive Holder Tilt Swivel for Nokia  5800

Stock : 1

Item No. : 875288

inc. Vat

When keeping your Nokia 5800 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 5800 when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Extra sturdy and extra strong are just a few words people have been using to describe this passive Car Kit Holder Mount. This Car Kit Holder Mount is mounted on a Tilt Swivel system keeping your device within easy reach and gripped by a cradle so super strong, your Mobile Phone will stay put even on the most cobbled of city streets. Have a PDA, Mobile, MP3 player, GPS device or iPod? This Mount will accommodate your phone and we sell the best attachments to keep them all in sync. The tilt swivel system allows you to position your Phone to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit will accommodate all battery sizes and is easily attached onto a Brodit ProClip Mounting Platform. We have designed the Car Kit Holder Mount to accept the charging cable to allow you to charge your phone while it is in the cradle. Place your mobile in the mount and see if this isn't the most secure car kit you have ever tried. Optional equipment sold separately.

Item No :875288

STEP 1- Choose the Brodit Holder

Brodit Mobile Phone  Active Holder Tilt Swivel for Nokia  5800

Stock : 5

Item No. : 965288

inc. Vat

With cig-plug.

The active holder charges your battery when it is in the holder. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. The phone has got the connector for charging on the side of the device. The active holders offer a firm fit, it is easy to put the phone in the holder and then connect the charging cable to it.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.

Item No :965288

STEP 1- Choose the Brodit Holder

Brodit Mobile Phone  Active Holder Tilt Swivel for Nokia  5800

Stock : 1 - 3 [ call to confirm ]

Item No. : 971288

inc. Vat

For fixed installation, with Molex adapter system. 2A charger.

An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The phone has got the connector for charging on the side of the device. The active holders offer a firm fit, it is easy to put the phone in the holder and then connect the charging cable to it. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.

This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.

Item No :971288

STEP 1- Choose the Brodit Holder

Brodit Mobile Phone  Holder for Cable Attachment for Nokia  5800

Stock : 1 - 3 [ call to confirm ]

Item No. : 906288

inc. Vat

For Nokia original cable CA-116, CA-113CU and CA-134.

Holder for cable plug attachment. To be used with Nokia original cable CA-116 (included in CK-7W), CA-113CU (included in CK-300), or CA-134 (included in CK-100 and CK-600). The cable is easy to attach to the holder. The cable connects to the phone automatically when you put your Nokia in the holder so you do not have to connect it manually each time. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Item No :906288