Brodit
GPS
Mount with tilt swivel
for
TomTom
GO 520 T
Stock : 3
Item No. :
215267
£
24.99
inc. Vat
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
GPS
Active Holder Tilt Swivel
for
TomTom
GO 520 T
Stock : 1 - 3 [ call to confirm ]
Item No. :
273006
£
34.98
inc. Vat
With cigarette lighter plug. With TMC connectivity (round plug).
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt. Fits devices with a TMC module with a round plug. (TMC module not included).
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.
Brodit
GPS
Active Holder Tilt Swivel
for
TomTom
GO 520 T
Stock : 7
Item No. :
274006
£
53.97
inc. Vat
With straight cable for fixed installation. 12/24 Volt, 2 A charger. With TMC connectivity (round plug).
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Fits devices with a TMC module with a round connector. (TMC module not included).
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
This car kit mount is meant for a fixed installation utilizing the Molex adapter cabling system. With the cables connected through the dashboard, this car kit gives a sleek, discreet appearance unrivaled by other less engineered cradles. No cables laying about here - with the Molex adapter cabling system you can immediately power any Bluetooth GPS device utilizing a 12/24 volt charging system (of course it is E-approved). The tilt swivel allows you to position the cradle as it suits your driving style. Whether you position the cradle in a vertical, open, closed, or horizontal position - you'll notice that your device will stay put even over the harshest of city streets. Connecting the power cable to a 2A fusible link allows this car kit to power most devices. We suggest that this ProClip car kit mount have professional installation.
A holder for fixed installation of your device. The choice for you who want to have your device permanently installed in the vehicle. The device is locked into the holder so it can not be removed easily. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt. Fits devices with a TMC module. (TMC module not included). Without Torx key.
The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
A holder for fixed installation of your device. The choice for you who want to have your device permanently installed in the vehicle. The device is locked into the holder so it can not be removed easily. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt. Fits devices with a TMC module. (TMC module not included). A Torx-key that is needed for the installation is included. (Can also be orderd without the Torx-key, item no 275013.)
The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
With straight cable for fixed installation. 12/24 Volt, 2 A charger. Without Torx key.
A holder for fixed installation of your device. The choice for you who want to have your device permanently installed in the vehicle. The device is locked into the holder so it can not be removed easily. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Fits devices with a TMC module. (TMC module not included). Without Torx key.
The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
The ProClip is a mounting bracket for the Citroen C2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C2. Made in black ABS plastic. Comes with detailed instructions.
Ford Mondeo ProClip Center mount
Stock : 6
Item No. : 654055
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Ford Mondeo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Mondeo. Made in black ABS plastic. Comes with detailed instructions.
Mitsubishi Montero ProClip Center mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 651967
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Mitsubishi Montero's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mitsubishi Montero. Made in black ABS plastic. Comes with detailed instructions.
Renault Scenic ProClip Center mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 653351
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Renault Scenic's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Renault Scenic. Made in black ABS plastic. Comes with detailed instructions.
Kia Cerato ProClip Center mount
Stock : 5
Item No. : 653586
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Kia Cerato's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Kia Cerato. Made in black ABS plastic. Comes with detailed instructions.
Volkswagen Passat ProClip Right mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 603606
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Volkswagen Passat's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Passat. Made in black ABS plastic. Comes with detailed instructions.
Volvo S60 ProClip Center mount left
Stock : 1 - 3 [ call to confirm ]
Item No. : 652982
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Volvo S60's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo S60. Made in black ABS plastic. Comes with detailed instructions.
Mazda RX 8 ProClip Center mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 653301
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Mazda RX 8's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda RX 8. Made in black ABS plastic. Comes with detailed instructions.
HTC Touch Passive Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 848751
£ 24.99 incl. Vat
Click Image to enlarge
Only for the GSM version.
With your HTC Touch in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the HTC Touch in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the HTC Touch when it is in the holder. Only for the GSM version. Attach onto ProClip Mounting Platform.
HTC P6300 Active Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 971745
£ 57.96 incl. Vat
Click Image to enlarge
For fixed installation, with Molex adapter system. 2A charger.
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
Click Image to enlarge
