Brodit ProClip and Holders - Dedicated UK Supplier

STEP 1- Choose the Brodit Holder

Brodit GPS  Holder for Locking for TomTom  GO 520

Stock : 1 - 3 [ call to confirm ]

Item No. : 276015

inc. Vat

With straight cable for fixed installation. 12/24 Volt, 2 A charger. With Torx key.

A holder for fixed installation of your device. The choice for you who want to have your device permanently installed in the vehicle. The device is locked into the holder so it can not be removed easily. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. A Torx-key that is needed for the installation is included. (Can also be orderd without the Torx-key, item no 276012.)

The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Item No :276015

STEP 1- Choose the Brodit Holder

Brodit GPS  Holder with Pass-Through Connector for TomTom  GO 520

Stock : 1 - 3 [ call to confirm ]

Item No. : 277024

inc. Vat

Passive holder with tilt swivel. With TMC connectivity (MiniUSB plug).

Passive holder with pass-through connector. All cables that can be used with the GPS device can also be used with the holder, for example a charging cable or a TMC cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder. Fits TMC with miniUSB connector (TMC not included).

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Item No :277024

STEP 1- Choose the Brodit Holder

Brodit GPS  Holder with Pass-Through Connector for TomTom  GO 520

Stock : 1 - 3 [ call to confirm ]

Item No. : 278024

inc. Vat

Active holder with cigg-plug, with tilt swivel. 12/24 Volt. With TMC connectivity (MiniUSB plug).

Active holder with pass-through connector and cigarette lighter plug. All cables that can be used with the GPS device can also be used with the holder, for example a TMC cable. This means that you can have both charging and TMC connected to the GPS in the same time! Fits TMC with miniUSB connector (TMC not included).

When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder. The holder has a cigarette lighter plug for connection to the vehicle's 12 Volt socket. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Item No :278024

STEP 1- Choose the Brodit Holder

Brodit GPS  Holder with Pass-Through Connector for TomTom  GO 520

Stock : 1 - 3 [ call to confirm ]

Item No. : 279024

inc. Vat

Active holder for fixed installation. With tilt swivel. 12/24 Volt. With TMC connectivity (MiniUSB plug).

Active holder with pass-through connector and for fixed installation. All cables that can be used with the GPS device can also be used with the holder, for example a TMC cable. This means that you can have both charging and TMC connected to the GPS in the same time! When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder. Fits TMC with miniUSB connector (TMC not included).

The holder has a straight cable with open end for fixed installation. The cable is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can easily take the device with you when leaving the vehicle. 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Item No :279024

STEP 1- Choose the Brodit Holder

Brodit GPS  Charging Cable for TomTom  GO 520

Stock : 1 - 3 [ call to confirm ]

Item No. : 942625

inc. Vat

For use in the vehicle's cigarette lighter socket, charges your TomTom GO 520. Can be connected to the TomTom GO 520 when it is in a passive holder.

This charging cable is adaptable to over twenty five (25) different devices (HTC, O2 XDA, Qtek, Siemens, T-Mobile and i-mate) and conveniently fits onto your ProClip Mounting Platform. When connecting your PDA or other device to the cradle, this cable will sit firm and snug allowing proper charging and then accessibility of easy removal when you are on the go. When coupled with a great car kit, mounting this charging cable will give you years of use and peace of mind. Molded in hardened plastic with a cord that is hard to tangle, this charging cable is unlike those flimsier units that last for only a few charges. We thought of your safety when we designed the charging cable. You'll notice that when plugging the cable into the cigarette lighter socket the device instantly powers up and is always protected by an inline fusible link. So when placing your device into the car kits cradle - rest assure you are protected by simple power surges sometimes associated with faulty alternators.

Item No :942625