Brodit ProClip and Holders - Dedicated UK Supplier

These are detailed fitting Instructions for the Brodit Mount for your Nokia E75 Mobile Phone. This is how you fit your Active Holder Tilt Swivel mount onto your proclip. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the holder. Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse holder and fuse inline with the Red wire close to the power source. Route the cable from the holder into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the holder please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters.

Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle.

Installation of the holder: 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate. 4. The holder is in place.

3.

4.

Once you have chosen your holder, you can then choose the vehicle specific Brodit Proclip to mount your device on your dashboard

What's in the Package?

Active Holder Tilt Swivel
4 x Screws (to mount onto the proclip or other mounting platform)
Fitting Instructions
With tilt swivel, with Molex adapter system. 2A charger. For an upright, closed position.

This Active Holder Tilt Swivel (513009 ) fits :

Nokia E75 for All Countries