Brodit ProClip and Holders - Dedicated UK Supplier

These are detailed fitting Instructions for the Brodit Mount for your Apple iPad MP3 Player. This is how you fit your Holder with lock. mount onto your proclip. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. Carefully, slide the device sideways into the holder so you hear/feel it snaps into place. To lock the holder: slide the lock sideways onto the left part of the holder. Press the button to lock.

3. To unlock the holder: Use the enclosed key to open the lock. Remove the lock. To remove the device from the holder: Slide it to the left then press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.

4. The holder is in place.

3.

4.

Once you have chosen your holder, you can then choose the vehicle specific Brodit Proclip to mount your device on your dashboard

What's in the Package?

Holder with lock.
4 x Screws (to mount onto the proclip or other mounting platform)
Fitting Instructions
With Pass-Through Connector and tilt swivel. 2 keys included. Visible home button.

This Holder with lock. (537139 ) fits :

Apple iPad for All Countries

Apple iPad 1 for All Countries