Brodit ProClip and Holders - Dedicated UK Supplier

These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 3G Mobile Phone. This is how you fit your Holder with Pass-Through Connector mount onto your proclip. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the holder.

1. To adjust the holder to your unit: Loosen the screws on the back side of the holder, so the sides of the holders can be adjusted.

2. Place the unit in the holder and press the sides together so the unit is firmly in place. Screw on the screws on the back side of the holder.

3. To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.

4. The holder is in place.

3.

4.

Once you have chosen your holder, you can then choose the vehicle specific Brodit Proclip to mount your device on your dashboard

What's in the Package?

Holder with Pass-Through Connector
4 x Screws (to mount onto the proclip or other mounting platform)
Fitting Instructions
Adjustable holder, fits devices with skins.

This Holder with Pass-Through Connector (915290 ) fits :

Apple iPhone 3G for All Countries

Apple iPhone 2G for All Countries

Apple iPhone 3GS for All Countries