Brodit ProClip and Holders - Dedicated UK Supplier

These are detailed fitting Instructions for the Brodit Mount for your Apple iPhone 3G Mobile Phone. This is how you fit your Holder for Cable Attachment mount onto your proclip. Full Instructions also come with your mount.

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Remove the screws on the back of the holder so you can remove the back piece. Place the holder with the frontside downwards. Place the connector into the lower part of the holder (the mark poitning downward so you can not see it).

2. Place the back piece over the connector, make sure the cable is in the correct position. Screw the back piece into place using the removed screws. The cable is in place.

3. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder is in place.

3.

4.

Once you have chosen your holder, you can then choose the vehicle specific Brodit Proclip to mount your device on your dashboard

What's in the Package?

Holder for Cable Attachment
4 x Screws (to mount onto the proclip or other mounting platform)
Fitting Instructions
For use with Parrot MK9000-series. With tilt swivel. Padded.

This Holder for Cable Attachment (915297 ) fits :

Apple iPhone 3G for All Countries

Apple iPhone 3GS for All Countries