Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   i e href   Samsung galaxy s8   icom   Brodit iPhone   blackberry   i h  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 15 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit MP3 Player  MultiStand for Apple  iPad Air

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 215661

£ 47.52

inc. Vat


Mounting Adapter and Screws Included. For Otterbox Defender Series.


By using the multi stand it is easier to carry your iPad Air around with you. You easily place the iPad Air in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can connect e.g. a charging cable to the iPad Air when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215661


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit MP3 Player  MultiStand for Apple  iPad Air

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 215738

£ 41.69

inc. Vat


Mounting Adapter and Screws Included. Black.


When using the MultiStand it is easier to carry the iPad Air around with you. You easily place the iPad Air in the stand, it is then firmly attached wherever you go! Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can connect e.g. a charging cable to the iPad Air when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
MultiStand film!
 



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215738


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit MP3 Player  MultiStand for Apple  iPad Air

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 215780

£ 36.11

inc. Vat


MultiStand support leg, for larger surfpads. Length: 120 mm. Mounting Adapter and Screws Included. Black.


This support leg is to be used then you want to convert your current holder into a MultiStand. Easily change the existing tilt swivel to the support leg instead and you will have a completely new holder!
 
When using a MultiStand it is easier to carry the surfpad around with you. Convenient to use anywhere at home, in the car or in the office. Diminishes the risk to drop the device, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
The support leg is 120 mm long and fits best with larger surfpads.
 
Tablets should not be installed onto a car's dashboard. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
MultiStand film!
 
 



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215780


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit MP3 Player  Passive holder with tilt swivel for Apple  iPad Air

Stock : 3

Item No. : 511577

£ 36.11

inc. Vat



With your iPad Air in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Air phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.




Item No :511577


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit MP3 Player  Passive holder with tilt swivel for Apple  iPad Air

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511600

£ 36.11

inc. Vat


For Otterbox Defender Series.


With your iPad Air in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Air phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.




Item No :511600


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit MP3 Player  Active holder with cig-plug. for Apple  iPad Air

Stock : 1

Item No. : 521577

£ 76.04

inc. Vat


With USB-cable with cig-plug adapter. Apple approved charging cable. With tilt swivel.


The choice for a freshly charged battery, a neat and comfortable installation. The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
  
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 



Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.


Item No :521577


Attach the Brodit MP3 Player Holder for Apple  iPad Air onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

BMW 318-330-E90-E91-E92 ProClip Angled mount NOT for car with navigation unit NOT for wood grain panel

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653599

£ 15.2 incl. Vat
Brodit BMW 318-330-E90-E91-E92 ProClip 05-10 All Countries Angled mount  NOT for car with navigation unit  NOT for wood grain panel NOT for car with navigation un

Click Image to enlarge


NOT for car with navigation un
The ProClip is a mounting bracket for the BMW 318-330-E90-E91-E92's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 318-330-E90-E91-E92. Made in black ABS plastic. Comes with detailed instructions.

Acura MDX Headrest mount Headrest mount

Stock : 2

Item No. : 811020

£ 47.52 incl. Vat
Brodit Acura MDX Headrest mount 07-16 USA Headrest mount Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.

Click Image to enlarge


Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Acura MDX, some of them are listed below. Are you missing a model? Measure the headrest in your Acura MDX, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

BlackBerry Z10 Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512447

£ 43.72 incl. Vat
Brodit BlackBerry Z10 Active holder with cig-plug.   All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your BlackBerry when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Ford Mondeo ProClip Center mount

Stock : 3

Item No. : 654055

£ 15.2 incl. Vat
Brodit Ford Mondeo ProClip 08-14 All Countries Center mount NOT for models with navigation screen. NOT for Business X.

Click Image to enlarge


NOT for models with navigation screen. NOT for Business X.
The ProClip is a mounting bracket for the Ford Mondeo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Mondeo. Made in black ABS plastic. Comes with detailed instructions.

Audi A4 Avant ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652870

£ 15.2 incl. Vat
Brodit Audi A4 Avant ProClip 02-07 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Audi A4 Avant's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A4 Avant. Made in black ABS plastic. Comes with detailed instructions.

Volvo C70 Headrest mount Headrest mount

Stock : 2

Item No. : 811050

£ 47.52 incl. Vat
Brodit Volvo C70 Headrest mount 97-05 UK Headrest mount

Click Image to enlarge



Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

Ford Focus ProClip Angled mount

Stock : 2

Item No. : 652788

£ 15.2 incl. Vat
Brodit Ford Focus ProClip 99-04 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Focus's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Focus. Made in black ABS plastic. Comes with detailed instructions.

Brodit Accessories MoveClip 

Stock : 2

Item No. : 215503

£ 12.34 incl. Vat
Brodit Brodit Accessories MoveClip  All Countries  MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws.

Click Image to enlarge


MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws.
MultiMoveClip is for you who easily want to switch between different device holders on the same ProClip. Perfect if you have different cell phones but drive the same car, or if you want to place your GPS where the cell phone usually sits. You attach the MultiMoveClip onto your ProClip in your car and it is then ready to use with your device holders of choice. Your device holders are fitted just as secure as if they were screwed directly onto the ProClip.
 
MultiMoveClip fits with all Brodit's holders with tilt swivel. There are two sizes of tilt swivels and to be able to fit even the smaller size two adapter plates are enclosed with the delivery. Combined with item no 215504 MultiMoveClip also fits holders without tilt swivel.
 
MultiMoveClip film!
 

BMW X3 ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653407

£ 15.2 incl. Vat
Brodit BMW X3 ProClip 04-10 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the BMW X3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW X3. Made in black ABS plastic. Comes with detailed instructions.

Fiat 500 ProClip Center mount

Stock : 6

Item No. : 654124

£ 15.2 incl. Vat
Brodit Fiat 500 ProClip 07-15 UK Center mount NOT for PopStar.

Click Image to enlarge


NOT for PopStar.
The ProClip is a mounting bracket for the Fiat 500's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Fiat 500. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories