Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
i e href   apple   i h   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   a 647   i href   fiat   a h   a href   a hx   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy Nexus   iPad   icom  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Browse Accessories by

Brand

Category

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 283 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215159

£ 15.18

inc. Vat


Mounting plate for tablet PC, touch screens etc. 110 X 70 mm.


Mounting plate for installation of Tablet PCs, touch screens etc. Consists of one back piece and one front piece. Comes with adhesive tape on the back.



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215159


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215436

£ 15.18

inc. Vat


Extension plate, 155x50x5mm. With predrilled holes.


The extension plate makes it possible to attach two devices with tilt swivel
onto the same ProClip, e.g. a GPS device holder as well as a Brodit Accessories phone holder. With predrilled holes, made of black ABS plastic. Size: 155x50x5mm.



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215436


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Tilt swivel for Brodit  Accessories

Stock : 5

Item No. : 215500

£ 17.63

inc. Vat


Big tilt swivel with centered face plate with predrilled holes. 42x50x25 mm.


Mounting plate with a big strong tilt swivel for installation of heavier devices such as larger monitors, laptops etc. Allows you to adjust the angle of the device and provides a flexible yet firm installation. Can be angled 20 in every direction. Dimensions: 42x50x25 mm.



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215500


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215285

£ 8.81

inc. Vat


Headset Hook. For Brodit Accessories phone/smartphone holders or Brodit Accessories holders.


A hook for hanging a headset, portable handsfree, charging cable etc neatly in place by your holder. The hook is to be installed between the device holder and the ProClip Mounting Platform.

The package contains two hooks with different sized mounting plates. Choose the hook with a smaller mounting plate for use with Brodit Accessories phone/smartphone holders or the hook with a larger mounting plate for use with Brodit Accessories handheld holders.

Fits holders both with and without tilt swivel. 2 screws included in the package.



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215285


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder with cig-plug for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 521621

£ 63.68

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :521621


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder with cig-plug for Brodit  Accessories

Stock : 1

Item No. : 521629

£ 63.68

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :521629


Attach the Brodit Solution Holder for Brodit  Accessories onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

Brodit Accessories Monitor Mount. 

Stock : 1 - 3 [ call to confirm ]

Item No. : 213035

£ 27.43 incl. Vat
Brodit Brodit Accessories Monitor Mount.  All Countries  Mounting plate with Tilt Swivel, angled 90.

Click Image to enlarge


Mounting plate with Tilt Swivel, angled 90.
Install onto a flat, horizontal surface. Fits monitors with a vertical slot in back.

Safaya 10-2inch DVD Mounting Accessories 

Stock : 1 - 3 [ call to confirm ]

Item No. : 215112

£ 24.48 incl. Vat
Brodit Safaya 10-2inch DVD Mounting Accessories  All Countries  Monitor mount for Safaya screen. Is to be used with a Headrest Mount (item number 8108x0).

Click Image to enlarge


Monitor mount for Safaya screen. Is to be used with a Headrest Mount (item number 8108x0).

Ford Focus ProClip Center mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 652667

£ 15.67 incl. Vat
Brodit Ford Focus ProClip 99-04 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Focus's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Focus. Made in black ABS plastic. Comes with detailed instructions.

Brodit Accessories Monitor Mount. 

Stock : 1 - 3 [ call to confirm ]

Item No. : 213069

£ 25.47 incl. Vat
Brodit Brodit Accessories Monitor Mount.  All Countries  Mount for monitors with a hole underneath for thumb screw attachment (

Click Image to enlarge


Mount for monitors with a hole underneath for thumb screw attachment ("-thread).With tilt swivel.
The choice for an adjustable monitor angle. Fits a number of monitor models with a hole underneath for thumb screw attachment (-thread). Install onto ProClip.

Nokia N95 4GB Passive Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 875156

£ 23.99 incl. Vat
Brodit Nokia N95 4GB Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



When keeping your Nokia N95 4GB in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia N95 4GB when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Brodit Accessories Mounting Accessories 

Stock : 1 - 3 [ call to confirm ]

Item No. : 213007

£ 12.73 incl. Vat
Brodit Brodit Accessories Mounting Accessories  All Countries  Angled extension plate. 3 pcs/pack.

Click Image to enlarge


Angled extension plate. 3 pcs/pack.
Can be used for installation of two devices placed in different height on the same ProClip. (3pcs/pack). Made of black ABS palstic. 117x124x5 mm.

Brodit Accessories Mounting equipment 

Stock : 1

Item No. : 213008

£ 12.73 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  Extension plate, 149x69x5 mm. (3 pieces/pack)

Click Image to enlarge


Extension plate, 149x69x5 mm. (3 pieces/pack)
The extension plate makes it possible two attach to units onto the same ProClip, e.g. a Brodit Accessories holder as well as a Brodit Accessories phone holder. Comes with screws and adhesive tape on the back. Two predrilled holes.

Dimensions: 149x69x5 mm

Volvo S60 ProClip Center mount

Stock : 2

Item No. : 652777

£ 15.67 incl. Vat
Brodit Volvo S60 ProClip 00-10 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Volvo S60's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo S60. Made in black ABS plastic. Comes with detailed instructions.

Brodit Accessories Mounting equipment 

Stock : 1 - 3 [ call to confirm ]

Item No. : 213018

£ 16.99 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  Centered face plate with predrilled AMPS holes. Adjustable 15.

Click Image to enlarge


Centered face plate with predrilled AMPS holes. Adjustable 15.
With predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15 in every direction. 42x50x20 mm.

Brodit Accessories Mounting equipment 

Stock : 1

Item No. : 213006

£ 12.73 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.

Click Image to enlarge


MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories