Brodit
Solution
Monitor Mount.
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215021
£
28.98
inc. Vat
Mounting plate with Tilt Swivel, angled 90°. For monitors with a hole underneath for thumb screw attachment.
Fits a number of monitor models with a hole underneath for thumb screw attachment (“-thread). Install onto a horizontal surface.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1
Item No. :
215055
£
15.99
inc. Vat
MoveClip "Right" with 4 holes in both male & female.
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.
The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.
Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Device Mounting Adapter
for
Brodit
Accessories
Stock : 1
Item No. :
215061
£
10.99
inc. Vat
Device mounting Female adapter, AMPS-standard holes. To 215053.
The Device Mounting Adapter accommodates all Devices/Device Cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the Device or Cradle.
The Device Mounting Adapter consists of two parts - one Male Plate and One Female Plate that slides into each other and locks into place. The Male Plate attaches to the back of the Device/Device Cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The Female Plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.
Due to the sliding feature the Device or Device Cradle can easily be removed from the mount. Your Device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the Male Plate. The pictures show the Device Mounting Adapter in use with a Sirius Satellite Receiver and a ProClip Mounting Platform.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215122
£
22.98
inc. Vat
Oval centered face plate with predrilled AMPS holes. Adjustable 15°.
A small, oval face plate with predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15° in every direction.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 2
Item No. :
215145
£
18.99
inc. Vat
Fuse 2 A, with holder.
Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Car Kit.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215174
£
15.00
inc. Vat
Tap Splice with Crimp Terminal and Fuse 2 A, with holder.
Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Car Kit.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Wit tilt swivel. With Molex adapter system. 2A charger. Only for the GSM version.
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
With the Molex adapter system you can get power for a Bluetooth GPS receiver etc. (The device does not support datatransfer.)
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Only for the GSM version. Attach onto a ProClip Mounting Platform.
BlackBerry Storm Passive Holder Tilt Swivel
Stock : 1
Item No. : 848875
£ 24.99 incl. Vat
Click Image to enlarge
With your BlackBerry Storm in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the BlackBerry Storm in the holder, and to take it out of the holder. You can also easily switch between an upright or a horizontal position, just by turning the holder.
You can connect e.g. a charging cable to the BlackBerry Storm when it is in the holder. Attach onto ProClip Mounting Platform.
Brodit Accessories Mounting Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. : 215163
£ 19.99 incl. Vat
Click Image to enlarge
Angled distance plate, 50x50x5-18 mm. Angled 15°. With 6 predrilled holes.
Used for angle the installed equipment and to get it further away from the dashboard. Angled 15°. Tha plate is 50x50 mm, thickness 18-5 mm.
Brodit Accessories Table Stand
Stock : 3
Item No. : 215396
£ 16.49 incl. Vat
Click Image to enlarge
With rounded foot. With face plate with predrilled holes.
Keep you Brodit Accessories phone within easy reach in the office as well as home! You can attach any holder to the stand.
HTC HD2 Active Holder Tilt Swivel
Stock : 4
Item No. : 513086
£ 57.96 incl. Vat
Click Image to enlarge
With tilt swivel, with Molex adapter system. 2A charger.
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). Can be used with HTC original portable Handsfree.
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
Brodit Accessories Mounting Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. : 202001
£ 10.99 incl. Vat
Click Image to enlarge
Mounting plate Richter, female with adhesive tape.
Click Image to enlarge
