Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : Brodit Brand New Item - PreOrder Yours NOW !
Item No. :
215407
£
39.97
inc. Vat
Flexible arm, 25 cm. With predrilled AMPS-standard holes.
A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to be screwed into place in desired position. 25 cm.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting equipment
for
Brodit
Accessories
Stock : 1
Item No. :
215424
£
24.93
inc. Vat
ABS-plastic, black. 3 mm. 4 à 80x420, 4 à 120x420, 2 à 160x420, 1 à 200x420.
Set with sheets of black ABS-plastic, 3 mm thickness. Allows you to make your own special solutions. Consists of: 4 pcs of 80x420 mm 4 pcs of 120x420 mm 2 pcs of 160x420 mm 1 pcs of 200x420 mm
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : Brodit Brand New Item - PreOrder Yours NOW !
Item No. :
215452
£
19.97
inc. Vat
Oval centered face plate with predrilled AMPS holes. Adjustable 20°.
A small, oval face plate with predrilled holes for Brodit holders and THB HF-kits. Can be angled 20° in every direction.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215453
£
19.97
inc. Vat
Centered face plate with predrilled AMPS holes. Adjustable 20°.
With predrilled holes for Brodit holders and THB HF-kits. Can be angled 20° in every direction.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Device Mounting Adapter
for
Brodit
Accessories
Stock : Brodit Brand New Item - PreOrder Yours NOW !
Item No. :
215475
£
9.98
inc. Vat
Mounting adapter for MultiStand. Screws included. 50x60x8 mm.
Mounting adapter for MultiStand. Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of White ABS plastic. Dimensions: 50x60x8 mm.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : Brodit Brand New Item - PreOrder Yours NOW !
Item No. :
215497
£
12.99
inc. Vat
Universal mount for slot button and clip holder. With predrilled holes.
Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
The ProClip is a mounting bracket for the Volkswagen Jetta's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Jetta. Made in black ABS plastic. Comes with detailed instructions.
Brodit Accessories Mounting equipment
Stock : 4
Item No. : 213005
£ 10.99 incl. Vat
Click Image to enlarge
MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.
Brodit Accessories Mounting Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. : 213053
£ 15 incl. Vat
Click Image to enlarge
Extension plate, 145x50x5 mm. With predrilled AMPS-holes.
The extension plate makes it possible to attach to units onto the same ProClip, e.g. a Brodit Accessories holder as well as a Brodit Accessories phone holder. Comes with screws and adhesive tape on the back. With predrilled holes (AMPS-standard).
Dimensions: 145x50x5 mm.
Apple iPhone 4 Holder for Cable Attachment
Stock : 1 - 3 [ call to confirm ]
Item No. : 514164
£ 31.96 incl. Vat
Click Image to enlarge
For Griffin PowerJolt cable. Padded.
The choice for you who often connect an Griffin PowerJolt cable to your iPhone. You attach the Griffin-cable to the holder easily. It then connects automatically to the iPhone when you put it in the holder, so you do not have to connect the cable it manually each time.
The holder fits only for the new Griffin PowerJolt cable with release buttons on the sides. Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)
Keep your iPhone in a holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
BMW 318-330-E90-E91-E92 ProClip Angled mount NOT for car with navigation unit NOT for wood grain panel
Stock : 6
Item No. : 653599
£ 15.99 incl. Vat
Click Image to enlarge
NOT for car with navigation un
The ProClip is a mounting bracket for the BMW 318-330-E90-E91-E92's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 318-330-E90-E91-E92. Made in black ABS plastic. Comes with detailed instructions.
BMW 318-330-E90-E91-E92 ProClip Center mount NOT for car with navigation unit NOT for wood grain panel
Stock : 4
Item No. : 653598
£ 15.99 incl. Vat
Click Image to enlarge
NOT for car with navigation un
The ProClip is a mounting bracket for the BMW 318-330-E90-E91-E92's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 318-330-E90-E91-E92. Made in black ABS plastic. Comes with detailed instructions.
Toyota Prius ProClip Center mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 653437
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Toyota Prius's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Prius. Made in black ABS plastic. Comes with detailed instructions.
Click Image to enlarge
