Brodit ProClip and Holders - Dedicated UK Supplier

STEP 1- Choose the Brodit Holder

Brodit Solution  Passive Holder Tilt Swivel for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 213420

inc. Vat

Porti-S printer

Item No :213420

STEP 1- Choose the Brodit Holder

Brodit Solution  Water Resistant Case for Brodit  Accessories

Stock : 1

Item No. : 215002

inc. Vat

Brodit Accessories holder for motorcycles, 26,0 mm diameter. Fits HP iPAQ 55xx and PDAs smaller than that.

Water resistant case for installation of a Brodit Accessories on a motorcycle. Allows you to operate your Brodit Accessories while driving your motorcycle, regardless of the weather.

When the Brodit Accessories is in the case, it is well protected from rain and dust. You can take the case with the Brodit Accessories with you when leaving the motorcycle. It is easy to put the Brodit Accessories in the case, and to take it out of the case. You can have a charging- or GPS-cable as well as a headset connected to the Brodit Accessories when it is in the case. The case is attached onto a tilt swivel, so you can adjust your Brodit Accessories for easier viewing.

The installation of the water resistant case is quick and easy. The water resistant case has a protective hard shell with a soft transparent front. (Not water proof, do not put in water)

Fits HP iPAQ 55xx-series and Brodit Accessories smaller than that, for example HP 22xx-series, Qtek 2020, O2 XDA II etc.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215002

STEP 1- Choose the Brodit Holder

Brodit Solution  Water Resistant Case for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215003

inc. Vat

Brodit Accessories holder for boats. Fits HP iPAQ 55xx and PDAs smaller than that.

Water resistant case for installation of a Brodit Accessories on a boat. Allows you to operate your Brodit Accessories while driving your boat, regardless of the weather.

When the Brodit Accessories is in the case, it is well protected from rain and dust. You can have a charging- or GPS-cable as well as a headset connected to the Brodit Accessories when it is in the case. The case is attached onto a tilt swivel, so you can adjust your Brodit Accessories for easier viewing.

The installation of the water resistant case is quick and easy. You can take the case with the Brodit Accessories with you when leaving the boat. It is easy to put the Brodit Accessories in the case, and to take it out of the case. The water resistant case has a protective hard shell with a soft transparent front. (Not water proof, do not put in water)

Fits HP iPAQ 55xx-series and Brodit Accessories smaller than that, for example HP 22xx-series, Qtek 2020, O2 XDA II etc.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215003

STEP 1- Choose the Brodit Holder

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215017

inc. Vat

Holder for Navigon Bluetooth antenna.

Keep your Bluetooth GPS receiver in a holder in your vehicle, and you will always have the best possible reception. You can easily take the GPS receiver with you when leaving the vehicle. Attach onto a ProClip Mounting Platform, onto the dashboard by the windshield or any position of your choice.

If you need power supply to your Bluetooth GPS receiver, you can also use an active holder for fixed installation with Molex adapter system. Search on your device model for more intormation about these products.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215017

STEP 1- Choose the Brodit Holder

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215055

inc. Vat

MoveClip "Right" with 4 holes in both male & female.

The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.

The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215055

STEP 1- Choose the Brodit Holder

Brodit Solution  Device Mounting Adapter for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215061

inc. Vat

Device mounting Female adapter, AMPS-standard holes. To 215053.

The Device Mounting Adapter accommodates all Devices/Device Cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the Device or Cradle.

The Device Mounting Adapter consists of two parts - one Male Plate and One Female Plate that slides into each other and locks into place. The Male Plate attaches to the back of the Device/Device Cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The Female Plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the Device or Device Cradle can easily be removed from the mount. Your Device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the Male Plate. The pictures show the Device Mounting Adapter in use with a Sirius Satellite Receiver and a ProClip Mounting Platform.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215061