Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   Samsung Galaxy Nexus   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   tomtom 720   iPhone 7   blackberry   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 283 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder with cig-plug for Brodit  Accessories

Stock : 2

Item No. : 521844

£ 61.77

inc. Vat


Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. With Micro USB Type C charging cable.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a Micro-USB Type C charging cable. Fits phones with USB Type C charging inlet only.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.




Item No :521844


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder for fixed installation for Brodit  Accessories

Stock : Stock on order - 7-10 days

Item No. : 527840

£ 61.77

inc. Vat


2A charger. Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. With Micro USB Type C charging cable.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! This holder comes with a Micro-USB Type C charging cable. Fits phones with USB Type C charging inlet only.

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place). Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

12 Volt. The product is E-approved. Connect the power cable with a 2A fuse. 2A charger, professional installation recommended.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.




Item No :527840


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder for fixed installation for Brodit  Accessories

Stock : 1

Item No. : 527843

£ 61.77

inc. Vat


2A charger. Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. With Micro USB Type C charging cable.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! This holder comes with a Micro-USB Type C charging cable. Fits phones with USB Type C charging inlet only.
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place). Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
12 Volt. The product is E-approved. Connect the power cable with a 2A fuse. 2A charger, professional installation recommended.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.




Item No :527843


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting equipment for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 861638

£ 90.29

inc. Vat


Double sided adhesive tape. 25 mm. 15 m/roll.


Extra strength adhesive tape. Width: 25 mm. 15 meters per roll.




Item No :861638


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Adapter Cable for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 945053

£ 11.63

inc. Vat


Molex Pin 4 adaptor to DC, 3,5 mm.





Item No :945053


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Adapter Cable for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 945078

£ 12.34

inc. Vat


Molex Pin 4 adaptor to RX/TX/Ground, with open ends.


Length of cable: 100cm (connector heads not included).




Item No :945078


Attach the Brodit Solution Holder for Brodit  Accessories onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

Brodit Accessories Mounting equipment 

Stock : 1

Item No. : 213005

£ 12.34 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.

Click Image to enlarge


MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.

Land Rover Discovery 3 ProClip Center mount

Stock : 3

Item No. : 653572

£ 15.2 incl. Vat
Brodit Land Rover Discovery 3 ProClip 05-09 All Countries Center mount NOT for wood grain panel.

Click Image to enlarge


NOT for wood grain panel.
The ProClip is a mounting bracket for the Land Rover Discovery 3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Discovery 3. Made in black ABS plastic. Comes with detailed instructions.

Land Rover Discovery 3 ProClip Angled mount

Stock : 2

Item No. : 653573

£ 15.2 incl. Vat
Brodit Land Rover Discovery 3 ProClip 05-09 All Countries Angled mount NOT for wood grain panel.

Click Image to enlarge


NOT for wood grain panel.
The ProClip is a mounting bracket for the Land Rover Discovery 3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Discovery 3. Made in black ABS plastic. Comes with detailed instructions.

Brodit Accessories Adapter Cable 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 945051

£ 11.63 incl. Vat
Brodit Brodit Accessories Adapter Cable  All Countries  Molex Pin 4 adaptor to RJ11.

Click Image to enlarge


Molex Pin 4 adaptor to RJ11.

Nokia N82 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 971198

£ 56.25 incl. Vat
Brodit Nokia N82 Active Holder  Tilt Swivel  All Countries  With tilt swivel, with Molex adapter system, 2A charger.

Click Image to enlarge


With tilt swivel, with Molex adapter system, 2A charger.
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories