Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
a 647   apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   i e href   i h   i href   a hx   a href   audi a3   Samsung Galaxy Nexus   a h   942044   ford mondeo   xc60   iphone 4   iPad   a age741  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 283 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  MoveClip for Brodit  Accessories

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 215718

£ 20.90

inc. Vat


MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws.


MultiMoveClip is for you who easily want to switch between different device holders on the same ProClip. Perfect if you have different cell phones but drive the same car, or if you want to place your GPS where the cell phone usually sits. You attach the MultiMoveClip onto your ProClip in your car and it is then ready to use with your device holders of choice. Your device holders are fitted just as secure as if they were screwed directly onto the ProClip.

MultiMoveClip fits with all Brodit's holders with tilt swivel. There are two sizes of tilt swivels and to be able to fit even the smaller size two adapter plates are enclosed with the delivery. Combined with item no 215504 MultiMoveClip also fits holders without tilt swivel.

MultiMoveClip film!



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215718


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 240411

£ 8.55

inc. Vat


Gap opener tool, big.


A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With thin ends, one pointy and one level end. Manufacutred in black ABS plastic. 30x195x5 mm.




Item No :240411


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Passive holder with tilt swivel for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511626

£ 76.04

inc. Vat


Adjustable holder. Fits devices without skin. Width: 226-309 mm. Height: 151-226 mm.


With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Instruction video (new window)

Features
The adjustable holder fits for devices with the following dimensions: Width: 226-309 mm, Height: 151-226 mm. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product. Before using the holder you set the size to fit with your device. The holder is designed with the intention to leave as much space open as possible for connection of charging cables and/or headphones.

Important
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.




Item No :511626


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder with cig-plug for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 521628

£ 61.77

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :521628


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder with cig-plug for Brodit  Accessories

Stock : 2

Item No. : 521841

£ 61.77

inc. Vat


Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. With Micro USB Type C charging cable.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a Micro-USB Type C charging cable. Fits phones with USB Type C charging inlet only.

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :521841


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder for fixed installation for Brodit  Accessories

Stock : 2

Item No. : 527621

£ 61.77

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver of other own solutions (cannot be used for data communication or audio connection). The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.

Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :527621


Attach the Brodit Solution Holder for Brodit  Accessories onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

Opel Signum ProClip Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 603078

£ 15.2 incl. Vat
Brodit Opel Signum ProClip 03-08 UK Right mount

Click Image to enlarge



The ProClip is a mounting bracket for the Opel Signum's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Opel Signum. Made in black ABS plastic. Comes with detailed instructions.

Holden Vectra C ProClip Center mount

Stock : 1

Item No. : 653076

£ 15.2 incl. Vat
Brodit Holden Vectra C ProClip 02-10 Australia Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Holden Vectra C's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Holden Vectra C. Made in black ABS plastic. Comes with detailed instructions.

Peugeot 206 ProClip Angled mount

Stock : 2

Item No. : 652675

£ 15.2 incl. Vat
Brodit Peugeot 206 ProClip 99-08 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Peugeot 206's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Peugeot 206. Made in black ABS plastic. Comes with detailed instructions.

Audi A2 ProClip Console mount

Stock : 1

Item No. : 632839

£ 15.2 incl. Vat
Brodit Audi A2 ProClip 01-05 All Countries Console mount

Click Image to enlarge



The ProClip is a mounting bracket for the Audi A2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A2. Made in black ABS plastic. Comes with detailed instructions.

Samsung Galaxy S7 Edge Active holder with cig-plug 

Stock : 2

Item No. : 521866

£ 59.88 incl. Vat
Brodit Samsung Galaxy S7 Edge Active holder with cig-plug  All Countries  With USB-cable with cig-plug adapter. With tilt swivel.

Click Image to enlarge


With USB-cable with cig-plug adapter. With tilt swivel.
The active holder charges your Galaxy S7 Edge when it is in the holder. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. 12 Volt. Attach the holder onto a ProClip Mounting Platform in your car.

Important note!
In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

Ford Transit Custom ProClip Center mount

Stock : 6

Item No. : 654857

£ 15.2 incl. Vat
Brodit Ford Transit Custom ProClip 13-16 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Transit Custom's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Transit Custom. Made in black ABS plastic. Comes with detailed instructions.

Brodit Accessories Mounting equipment 

Stock : 1

Item No. : 213005

£ 12.34 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.

Click Image to enlarge


MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.

Huawei Nexus 6P Active holder with cig-plug 

Stock : 3

Item No. : 512818

£ 43.72 incl. Vat
Brodit Huawei Nexus 6P Active holder with cig-plug  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your Nexus 6P when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform in your car.

BMW 1-series ProClip Center mount

Stock : 1

Item No. : 653523

£ 15.2 incl. Vat
Brodit BMW 1-series ProClip 05-13 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the BMW 1-series's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 1-series. Made in black ABS plastic. Comes with detailed instructions.

Volvo C70 Headrest mount Headrest mount

Stock : 2

Item No. : 811050

£ 47.52 incl. Vat
Brodit Volvo C70 Headrest mount 97-05 UK Headrest mount

Click Image to enlarge



Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories