Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   Samsung Galaxy Nexus   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   blackberry   tomtom 720   iPhone 7   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 283 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder for fixed installation for Brodit  Accessories

Stock : 3

Item No. : 527621

£ 61.77

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver of other own solutions (cannot be used for data communication or audio connection). The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.




Item No :527621


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder for fixed installation for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 527629

£ 61.77

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver of other own solutions (cannot be used for data communication or audio connection). The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.




Item No :527629


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder for fixed installation for Brodit  Accessories

Stock : 1

Item No. : 527630

£ 61.77

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver of other own solutions (cannot be used for data communication or audio connection). The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.
 
Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.




Item No :527630


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting equipment for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 861637

£ 70.34

inc. Vat


Double sided adhesive tape. 12 mm. 15 m/roll.


Extra strength adhesive tape. Width: 12 mm. 15 meters per roll.




Item No :861637


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Adapter Cable for Brodit  Accessories

Stock : 4

Item No. : 945012

£ 12.34

inc. Vat


Molex Pin 2 adaptor to cig-plug.


Is to be attached to the Molex adapter system in order to replace the cable for fixed installation with a cigarette lighter cable.

Length of cable: 42,5cm (connector heads not included).




Item No :945012


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Adapter Cable for Brodit  Accessories

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 945051

£ 11.63

inc. Vat


Molex Pin 4 adaptor to RJ11.





Item No :945051


Attach the Brodit Solution Holder for Brodit  Accessories onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

O2 XDA Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 971582

£ 61.77 incl. Vat
Brodit O2 XDA Active Holder  Tilt Swivel  All Countries  With tilt swivel, with Molex adapter system for GPS and data transfer. 2A charger.

Click Image to enlarge


With tilt swivel, with Molex adapter system for GPS and data transfer. 2A charger.
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever, data transer or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Nokia N82 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 971198

£ 56.25 incl. Vat
Brodit Nokia N82 Active Holder  Tilt Swivel  All Countries  With tilt swivel, with Molex adapter system, 2A charger.

Click Image to enlarge


With tilt swivel, with Molex adapter system, 2A charger.
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

Brodit Accessories Adapter Cable 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 945053

£ 11.63 incl. Vat
Brodit Brodit Accessories Adapter Cable  All Countries  Molex Pin 4 adaptor to DC, 3,5 mm.

Click Image to enlarge


Molex Pin 4 adaptor to DC, 3,5 mm.

Sony Ericsson XPERIA X1 Passive Holder Tilt Swivel 

Stock : 1

Item No. : 875266

£ 24.71 incl. Vat
Brodit Sony Ericsson XPERIA X1 Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



When keeping your Sony Ericsson Xperia X1 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Sony Ericsson Xperia X1 when it is in the holder. The passive holder is equipped with a tilt swivel so you can easily switch between an upright or a horizontal position as well as adjust the angle of your phone for avoiding light reflection. Attach onto a ProClip Mounting Platform.

Mercedes Benz Citan ProClip Angled mount

Stock : 1

Item No. : 654852

£ 15.2 incl. Vat
Brodit Mercedes Benz Citan ProClip 13-16 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mercedes Benz Citan's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mercedes Benz Citan. Made in black ABS plastic. Comes with detailed instructions.

BMW 1-series ProClip Center mount

Stock : 6

Item No. : 653523

£ 15.2 incl. Vat
Brodit BMW 1-series ProClip 05-13 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the BMW 1-series's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 1-series. Made in black ABS plastic. Comes with detailed instructions.

Ford Mondeo ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654823

£ 15.2 incl. Vat
Brodit Ford Mondeo ProClip 15-16 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Mondeo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Mondeo. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories