Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
i e href   apple   nokia   i h   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   i href   a h   a 647   audi a3   a href   942044   ford mondeo   xc60   iphone 4   a hx   Samsung Galaxy Nexus   iPad   icom  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Browse Accessories by

Brand

Category

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 283 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Passive holder with tilt swivel for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 511627

£ 78.38

inc. Vat


Adjustable holder. Fits devices with skin. Width: 226-309 mm. Height: 151-226 mm.


With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Instruction video (new window)

Features
The adjustable holder fits for devices with the following dimensions: Width: 226-309 mm, Height: 151-226 mm. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product. Before using the holder you set the size to fit with your device. The holder is designed with the intention to leave as much space open as possible for connection of charging cables and/or headphones.

Important
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.




Item No :511627


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Passive holder with tilt swivel for Brodit  Accessories

Stock : 2

Item No. : 511848

£ 54.86

inc. Vat


Adjustable holder. Fits devices with Height: 120-150 mm.


Adjustable holder. Fits devices with or without skin. Height: 120-150 mm.
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.The holder is mounted onto a tilt swivel so you can adjust the angle.

Features
The adjustable holder fits surfpads between 120 to 150 mm in height and most surfpads with or without case up to 25 mm at its thickest spot. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product. The top and bottom arms have padded cushions for added friction to ensure your surfpad stays as still as possible in the holder.

Important
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.




Item No :511848


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Passive holder with tilt swivel for Brodit  Accessories

Stock : 3

Item No. : 511849

£ 56.82

inc. Vat


Adjustable holder. Fits devices with Height: 140-195 mm.


Adjustable holder. Fits devices with or without skin. Height: 140-195 mm.
With your surfpad in a holder attached in your car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.The holder is mounted onto a tilt swivel so you can adjust the angle.

Features
The adjustable holder fits surfpads between 140 to 195 mm in height and most surfpads with or without case up to 25 mm at its thickest spot. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product. The top and bottom arms have padded cushions for added friction to ensure your surfpad stays as still as possible in the holder.

Important
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.




Item No :511849


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder with cig-plug for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 521630

£ 63.68

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :521630


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder with cig-plug for Brodit  Accessories

Stock : 2

Item No. : 521840

£ 63.68

inc. Vat


Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. With Micro USB Type C charging cable.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a Micro-USB Type C charging cable. Fits phones with USB Type C charging inlet only.

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :521840


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Active holder for fixed installation for Brodit  Accessories

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 527622

£ 63.68

inc. Vat


Adjustable holder with Micro-USB connector. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 12-16 mm. 2,1A charger. 12/24V. With tilt swivel.


Keep your phone in a holder when on the road and you will always have it within easy sight and reach. The active holder for fixed installation is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 12-16 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver of other own solutions (cannot be used for data communication or audio connection). The product is E-approved. Connect the power cable with a 2A fuse. Professional installation recommended.

Before using the holder you need to confirm the charging cable is turned the right way (you can rotate it) and also set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :527622


Attach the Brodit Solution Holder for Brodit  Accessories onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

Mercedes Benz Sprinter ProClip Right mount

Stock : 6

Item No. : 603875

£ 15.67 incl. Vat
Brodit Mercedes Benz Sprinter ProClip 07-16 All Countries Right mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mercedes Benz Sprinter's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mercedes Benz Sprinter. Made in black ABS plastic. Comes with detailed instructions.

Brodit Accessories Mounting equipment 

Stock : 5

Item No. : 213006

£ 12.73 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.

Click Image to enlarge


MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.

Volvo C70 Headrest mount Headrest mount

Stock : 4

Item No. : 811050

£ 48.99 incl. Vat
Brodit Volvo C70 Headrest mount 97-05 UK Headrest mount

Click Image to enlarge



Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

Acura MDX Headrest mount Headrest mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 810721

£ 48.99 incl. Vat
Brodit Acura MDX Headrest mount 07-16 USA Headrest mount Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.

Click Image to enlarge


Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Acura MDX, some of them are listed below. Are you missing a model? Measure the headrest in your Acura MDX, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.

Renault Koleos ProClip Center mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 654222

£ 15.67 incl. Vat
Brodit Renault Koleos ProClip 09-14 Australia Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Renault Koleos's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Renault Koleos. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories