Angled mount for a higher placement. With predrilled holes.
The choice when you want to install equipment in a higher position, for example to get the device higher up when installing onto a Console Mount ProClip. With predrilled holes, can be attached onto a tilt swivel.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Device Mounting Adapter
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215461
£
9.83
inc. Vat
Mounting adapter for MultiStand. Screws included. 50x60x8 mm.
Mounting adapter for MultiStand. Is to be used when you want to be able to hang the stand onto more than one place, e.g. onto the kitchen, in the car, in the caravan etc. Screws included. Made of Black ABS plastic. Dimensions: 50x60x8 mm.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mount with tilt swivel
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215421
£
46.48
inc. Vat
For a horizontal surface, adjustable 360 degrees.
A turnable mount for a stable and flexible installation onto a horizontal surface. Perfect for installation of any device/equipment that you want to be able to turn easily, e.g. a payment terminal in a shop or a touch-screen which several people use. You can turn the mount 360° sideways and the face plate, which is attached onto a tilt swivel, can be adjusted in height as well as turned 360° into desired angle. The mount can also be attached e.g. onto a ProClip Mounting Platform.
The face plate of the mount has predrilled holes (AMPS-standard) and the dimension of the face plate is 42x50 mm. The base plate of the mount has four predrilled holes and the dimension of the base plate is 42x50 mm. The mount is 62 mm high.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 2
Item No. :
215056
£
10.99
inc. Vat
Distance plate, 7x42x50 mm. With predrilled AMPS holes.
Used for positioning the installed equipment further away from the dashboard. Dimensions: 7x42x50 mm.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Vertical adapter plate with tilt swivel, for Arkon.
A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. The mount is equipped with a tilt swivel. Attach onto ProClip Mounting Platform.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215183
£
15.99
inc. Vat
Extension plate,100x50x5mm. With predrilled AMPS holes.
The extension plate makes it possible to attach to units onto the same ProClip, e.g. a Brodit Accessories holder as well as a Brodit Accessories phone holder. Comes with screws, Size: 100x50x5mm.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Device mounting adapter, AMPS-standard holes.
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.
The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.
Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius ratellite receiver and a ProClip Mounting Platform.
Audi A4 Avant ProClip Center mount
Stock : 3
Item No. : 652870
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Audi A4 Avant's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A4 Avant. Made in black ABS plastic. Comes with detailed instructions.
Brodit Accessories Mounting equipment
Stock : 2
Item No. : 213018
£ 16.69 incl. Vat
Click Image to enlarge
Centered face plate with predrilled AMPS holes. Adjustable 15°.
With predrilled holes for Nokia and Sony Ericsson Original HF-kits, Brodit holders and THB HF-kits. Can be angled 15° in every direction.
Fiat Croma ProClip Center mount
Stock : 4
Item No. : 653862
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Fiat Croma's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Fiat Croma. Made in black ABS plastic. Comes with detailed instructions.
ProClip ar en monteringsbygel som monteras på bilens instrumentbrada. På ProClip kan du montera t ex en hållare till mobiltelefonen eller handdatorn. Trafiksakert och bekvamt -du har alltid din mobiltelefon, handdator etc. inom bekvamt rackhåll. ProClip ar speciellt utformad till varje bilmodell och går snabbt och latt att montera. Monteringen skadar inte bilens inredning och du behöver inga specialverktyg. Tillverkad i svart ABS-plast. Monteringsanvisning medföljer.
Ford Fiesta ProClip Center mount
Stock : 1
Item No. : 652293
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Ford Fiesta's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fiesta. Made in black ABS plastic. Comes with detailed instructions.
Brodit Accessories Mounting equipment
Stock : 3
Item No. : 213008
£ 12.99 incl. Vat
Click Image to enlarge
Extension plate, 149x69x5 mm. (3 pieces/pack)
The extension plate makes it possible to attach to units onto the same ProClip, e.g. a Brodit Accessories holder as well as a Brodit Accessories phone holder. Comes with screws and adhesive tape on the back. Two predrilled holes.
Dimensions: 149x69x5 mm
Saab 9-3 ProClip Center mount NOT for models with navigation.
Stock : 1 - 3 [ call to confirm ]
Item No. : 653901
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Saab 9-3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Saab 9-3. Made in black ABS plastic. Comes with detailed instructions.
Toyota RAV 4 ProClip Center mount
Stock : 1
Item No. : 653753
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Toyota RAV 4's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota RAV 4. Made in black ABS plastic. Comes with detailed instructions.
Brodit Accessories Mounting equipment
Stock : 4
Item No. : 213005
£ 10.99 incl. Vat
Click Image to enlarge
MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.
Audi A4 Avant ProClip Right mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 602916
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Audi A4 Avant's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A4 Avant. Made in black ABS plastic. Comes with detailed instructions.
Click Image to enlarge
