Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1
Item No. :
945008
£
21.98
inc. Vat
Female cigg-plug with open ends for fixed installation.
Cigarette lighter socket with open ends for fixed installation. Is to be used when you want to use an active holder with cigarette lighter plug for a fixed installation. Is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
Connect the power cable with a 1,5 A fuse. Professional installation recommended. Can also be used as an additional socket.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215052
£
10.99
inc. Vat
V-slot button and clip holder. With predrilled holes.
Used for mobilephone, pager and orther products with button or a clip-holder. Predrilled for mount on a ProClip.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215054
£
15.99
inc. Vat
MoveClip "Left" with 4 holes in both male & female.
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.
The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.
Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Device Mounting Adapter
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215060
£
10.99
inc. Vat
Device mounting adapter, Male piece. AMPS-standard holes. Use with item 215053, 215054 or 215055.
Device mounting adapter, male piece. Is to be used with item 215053, 215054 or 215055. With this extra male piece you easily move your device between vehicles, for example.
The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215183
£
15.99
inc. Vat
Mounting plate (100x50x5mm). AMPS-standard.
The extension plate makes it possible to attach to units onto the same ProClip, e.g. a Brodit Accessories holder as well as a Brodit Accessories phone holder. Comes with screws, Size: 100x50x5mm.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215285
£
12.99
inc. Vat
Headset Hook. For Brodit Accessories phone/smartphone holders or Brodit Accessories holders.
A hook for hanging a headset, portable handsfree, charging cable etc neatly in place by your holder. The hook is to be installed between the device holder and the ProClip Mounting Platform.
The package contains two hooks with different sized mounting plates. Choose the hook with a smaller mounting plate for use with Brodit Accessories phone/smartphone holders or the hook with a larger mounting plate for use with Brodit Accessories handheld holders.
Fits holders both with and without tilt swivel. 2 screws included in the package.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
With your phone in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the phone in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the phone when it is in the holder.
Land Rover Discovery ProClip Right mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 603403
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Land Rover Discovery's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Discovery. Made in black ABS plastic. Comes with detailed instructions.
HTC Wizard Passive Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 848650
£ 24.99 incl. Vat
Click Image to enlarge
For an upright, closed position.
With your HTC Wizard in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. This holder holds your device in an upright closed position. There also is a holder that holds your device in a horizontal open position, see item 848655. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the HTC Wizard in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the HTC Wizard when it is in the holder.
Volkswagen Caravelle ProClip Right mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 602852
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Volkswagen Caravelle's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Caravelle. Made in black ABS plastic. Comes with detailed instructions.
Sony Ericsson P1i Active Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 965171
£ 34.98 incl. Vat
Click Image to enlarge
With cig-plug.
The active holder charges your battery when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
Brodit Accessories Mounting Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. : 215118
£ 12.99 incl. Vat
Click Image to enlarge
Mounting plate (143x50x5mm). AMPS-standard.
The extension plate makes it possible to attach two devices onto the same ProClip, e.g. a GPS device holder as well as a Brodit Accessories phone holder. Predrilled holes, AMPS standard. Made of black ABS plastic. Size: 143x50x5mm.
Honda Concerto ProClip Angled mount
Stock : 4
Item No. : 651861
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Honda Concerto's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Concerto. Made in black ABS plastic. Comes with detailed instructions.
Nokia N95 4GB Passive Holder Tilt Swivel
Stock : 3
Item No. : 875156
£ 21.98 incl. Vat
Click Image to enlarge
When keeping your Nokia N95 4GB in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia N95 4GB when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
Brodit Accessories Device Mounting Adapter
Stock : 1
Item No. : 215053
£ 16.69 incl. Vat
Click Image to enlarge
Device mounting adapter, AMPS-standard holes.
The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.
The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.
Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius ratellite receiver and a ProClip Mounting Platform.
Nokia 6020 Passive holder
Stock : 1 - 3 [ call to confirm ]
Item No. : 870021
£ 16.49 incl. Vat
Click Image to enlarge
When keeping your Nokia 6020 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 6020 when it is in the holder. Accommodates all battery sizes. Attach onto a ProClip Mounting Platform.