Buy a Brodit Brodit Accessories Car Holder

Shopping Cart

Learn about our SMS Shipment Alert service

Brodit Search + Buy

Most Popular Views

Today
Week
Month

Two Step Solution

Watch the Video

Browse Accessories by

Brand

Search + Buy all available Brodit Products

We Found 177 Item(s) that match your Search

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

STEP 1- Choose the Brodit Holder		STEP 2- Choose the Brodit ProClip
Brodit Solution Mounting Accessories for Brodit Accessories Stock : 1 - 3 [ call to confirm ]
Item No. : 215341	£ 12.99 inc. Vat

Self tapping screws. 50 pcs. Self tapping screws for ABS plastic, used when making own special mounting solutions. Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried. Item No :215341 Brodit Accessories Brodit Holder Fitting Instructions


STEP 1- Choose the Brodit Holder		STEP 2- Choose the Brodit ProClip
Brodit Solution Adapter Cable for Brodit Accessories Stock : 1 - 3 [ call to confirm ]
Item No. : 945058	£ 12.79 inc. Vat

Molex Pin 4 adaptor to RX/TX/Ground, with open ends. Item No :945058 Brodit Accessories Brodit Holder Fitting Instructions


STEP 1- Choose the Brodit Holder		STEP 2- Choose the Brodit ProClip
Brodit Solution Adapter Cable for Brodit Accessories Stock : 1 - 3 [ call to confirm ]
Item No. : 945070	£ 12.49 inc. Vat

Molex 4 Pin adaptor to DC, 4mm. Item No :945070 Brodit Accessories Brodit Holder Fitting Instructions


STEP 1- Choose the Brodit Holder		STEP 2- Choose the Brodit ProClip
Brodit Solution Monitor Mount. for Brodit Accessories Stock : 1 - 3 [ call to confirm ]
Item No. : 213069	£ 28.98 inc. Vat

Mount for monitors with a hole underneath for thumb screw attachment ("-thread).With tilt swivel. The choice for an adjustable monitor angle. Fits a number of monitor models with a hole underneath for thumb screw attachment (-thread). Install onto ProClip. Item No :213069 Brodit Accessories Brodit Holder Fitting Instructions


STEP 1- Choose the Brodit Holder		STEP 2- Choose the Brodit ProClip
Brodit Solution Mounting Accessories for Brodit Accessories Stock : 1 - 3 [ call to confirm ]
Item No. : 215163	£ 19.99 inc. Vat

Extension mounting plate, angled 15°. With 6 predrilled holes. Used for angle the installed equipment and to get it further away from the dashboard. Angled 15°. Tha plate is 50x50 mm, thickness 18-5 mm. Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried. Item No :215163 Brodit Accessories Brodit Holder Fitting Instructions


STEP 1- Choose the Brodit Holder		STEP 2- Choose the Brodit ProClip
Brodit Solution Mounting Accessories for Brodit Accessories Stock : 1 - 3 [ call to confirm ]
Item No. : 215181	£ 39.97 inc. Vat

Flexible arm, 15 cm. With predrilled AMPS-standard holes. A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to be screwed into place in desired position. Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried. Item No :215181 Brodit Accessories Brodit Holder Fitting Instructions

Attach the Brodit Solution Holder for Brodit Accessories onto your chosen Brodit Proclip for a true dashboard mounting solution

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Customers Also Viewed

Brodit Accessories Monitor Mount.

Stock : 1 - 3 [ call to confirm ]

Item No. : 213035

£ 28.98 incl. Vat

Brodit Brodit Accessories Monitor Mount. All Countries Mounting plate with Tilt Swivel, angled 90°.

Click Image to enlarge

Mounting plate with Tilt Swivel, angled 90°.
Install onto a flat, horizontal surface. Fits monitors with a vertical slot in back.

Safaya 10-2inch DVD Mounting Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215112

£ 24.99 incl. Vat

Brodit Safaya 10-2inch DVD Mounting Accessories All Countries Monitor mount for Safaya screen. Is to be used with a Headrest Mount (item number 8108x0).

Click Image to enlarge

Monitor mount for Safaya screen. Is to be used with a Headrest Mount (item number 8108x0).

Ford Focus ProClip Center mount

Stock : 1

Item No. : 652667

£ 15.99 incl. Vat

Brodit Ford Focus ProClip 99-04 All Countries Center mount

Click Image to enlarge

The ProClip is a mounting bracket for the Ford Focus's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Focus. Made in black ABS plastic. Comes with detailed instructions.

Brodit Accessories Mounting Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215159

£ 19.99 incl. Vat

Brodit Brodit Accessories Mounting Accessories All Countries Mounting plate for tablet PC, touch screens etc. 110 X 70 mm.

Click Image to enlarge

Mounting plate for tablet PC, touch screens etc. 110 X 70 mm.
Mounting plate for installation of Tablet PCs, touch screens etc. Consists of one back piece and one front piece. Comes with adhesive tape on the back.

Compaq iPAQ 38xx Active Holder Tilt Swivel

Stock : 1 - 3 [ call to confirm ]

Item No. : 971569

£ 57.96 incl. Vat

Brodit Compaq iPAQ 38xx Active Holder Tilt Swivel All Countries For fixed installation, with Molex adapter system for GPS and data transfer. 2A charger. Not expansionpack.

Click Image to enlarge

For fixed installation, with Molex adapter system for GPS and data transfer. 2A charger. Not expansionpack.
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS reciever, data transer or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Nissan Primastar ProClip Right mount

Stock : 6

Item No. : 603198

£ 15.99 incl. Vat

Brodit Nissan Primastar ProClip 02-10 UK Right mount

Click Image to enlarge

The ProClip is a mounting bracket for the Nissan Primastar's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Nissan Primastar. Made in black ABS plastic. Comes with detailed instructions.

HTC Touch HD Active Holder Tilt Swivel

Stock : 1 - 3 [ call to confirm ]

Item No. : 971870

£ 57.96 incl. Vat

Brodit HTC Touch HD Active Holder Tilt Swivel All Countries For fixed installation, with Molex adapter system. 2A charger.

Click Image to enlarge

For fixed installation, with Molex adapter system. 2A charger.
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Audi A5 ProClip Angled mount

Stock : 4

Item No. : 654063

£ 15.99 incl. Vat

Brodit Audi A5 ProClip 07-10 All Countries Angled mount

Click Image to enlarge

The ProClip is a mounting bracket for the Audi A5's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A5. Made in black ABS plastic. Comes with detailed instructions.

Apple iPod 2nd Generation 20 GB Holder For Cable Connection

Stock : 1 - 3 [ call to confirm ]

Item No. : 840651

£ 29.98 incl. Vat

Brodit Apple iPod 2nd Generation 20 GB Holder For Cable Connection All Countries For original cable, Neo ProLink v2 Dock Cable and Griffin PowerJolt cable. Padded.

Click Image to enlarge

For original cable, Neo ProLink v2 Dock Cable and Griffin PowerJolt cable. Padded.
Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included) .

Not for PowerJolt SE. The holder Fits only the old Griffin PowerJolt cable with release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

All Mount Menu

Secure Payments by

Feedback

Bluetooth/Navigation

Brodit ProClip and Holders - Dedicated UK Supplier

Shopping Cart

Brodit Search + Buy

Most Popular Views

Two Step Solution

Browse Accessories by

Search + Buy all available Brodit Products

We Found 177 Item(s) that match your Search

STEP 1- Choose the Brodit Holder

STEP 2- Choose the Brodit ProClip

Brodit Solution Mounting Accessories for Brodit Accessories

Self tapping screws. 50 pcs.

Self tapping screws for ABS plastic, used when making own special mounting solutions.

Item No :215341

STEP 1- Choose the Brodit Holder

STEP 2- Choose the Brodit ProClip

Brodit Solution Adapter Cable for Brodit Accessories

Molex Pin 4 adaptor to RX/TX/Ground, with open ends.

Item No :945058

STEP 1- Choose the Brodit Holder

STEP 2- Choose the Brodit ProClip

Brodit Solution Adapter Cable for Brodit Accessories

Molex 4 Pin adaptor to DC, 4mm.

Item No :945070

STEP 1- Choose the Brodit Holder

STEP 2- Choose the Brodit ProClip

Brodit Solution Monitor Mount. for Brodit Accessories

Mount for monitors with a hole underneath for thumb screw attachment ("-thread).With tilt swivel.

The choice for an adjustable monitor angle. Fits a number of monitor models with a hole underneath for thumb screw attachment (-thread). Install onto ProClip.

Item No :213069

STEP 1- Choose the Brodit Holder

STEP 2- Choose the Brodit ProClip

Brodit Solution Mounting Accessories for Brodit Accessories

Extension mounting plate, angled 15°. With 6 predrilled holes.

Used for angle the installed equipment and to get it further away from the dashboard. Angled 15°. Tha plate is 50x50 mm, thickness 18-5 mm.

Item No :215163

STEP 1- Choose the Brodit Holder

STEP 2- Choose the Brodit ProClip

Brodit Solution Mounting Accessories for Brodit Accessories

Flexible arm, 15 cm. With predrilled AMPS-standard holes.

A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to be screwed into place in desired position.

Item No :215181

Customers Also Viewed

Brodit Accessories Monitor Mount.

Safaya 10-2inch DVD Mounting Accessories

Ford Focus ProClip Center mount

Brodit Accessories Mounting Accessories

Compaq iPAQ 38xx Active Holder Tilt Swivel

Nissan Primastar ProClip Right mount

HTC Touch HD Active Holder Tilt Swivel

Audi A5 ProClip Angled mount

Apple iPod 2nd Generation 20 GB Holder For Cable Connection

All Mount Menu

Secure Payments by

Feedback

Bluetooth/Navigation

Accessories

The choice for an adjustable monitor angle. Fits a number of monitor models with a hole underneath for thumb screw attachment (-thread). Install onto ProClip.