Brodit ProClip and Holders - Dedicated UK Supplier

STEP 1- Choose the Brodit Holder

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1

Item No. : 213079

inc. Vat

Angled mounting platform, 60°. Attach with adhesive tape to flat, horizontal surface.

Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.

Item No :213079

STEP 1- Choose the Brodit Holder

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215054

inc. Vat

MoveClip "Left" with 4 holes in both male & female.

The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.

The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.

Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius satellite receiver and a ProClip Mounting Platform.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215054

STEP 1- Choose the Brodit Holder

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215145

inc. Vat

Fuse 2 A, with holder.

Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Car Kit.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215145

STEP 1- Choose the Brodit Holder

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215181

inc. Vat

Flexible arm, 15 cm. With predrilled AMPS-standard holes.

A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to be screwed into place in desired position.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215181

STEP 1- Choose the Brodit Holder

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 215183

inc. Vat

Mounting plate (100x50x5mm). AMPS-standard.

The extension plate makes it possible to attach to units onto the same ProClip, e.g. a Brodit Accessories holder as well as a Brodit Accessories phone holder. Comes with screws, Size: 100x50x5mm.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215183

STEP 1- Choose the Brodit Holder

Brodit Solution  Mounting Accessories for Brodit  Accessories

Stock : 5

Item No. : 215262

inc. Vat

Mount for display for Nokia handsfree CK-15W.

Used for installation of a display for Nokia HF-kit CK-15W onto a ProClip Mounting Platform instead of onto a vertical surface. You can adjust the display in order to avoid light reflecion. The cable can point downward or backward in desired angle. Delivered with adhesive tape on the back and screws.

Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.

Item No :215262