The device mounting adapter accommodates all devices/device cradles that have the AMPS hole pattern (a square like hole pattern) in the back of the device or cradle. The mounting adapter has a spring stud as a locking device.
The device mounting adapter consists of two parts - one male plate and one female plate that slides into each other and locks into place. The male plate attaches to the back of the device/device cradle and accommodates both AMPS landscape and portrait hole pattern/horizontal and vertical hole pattern. The female plate attaches to the ProClip Mounting Platform or any other type of mounting bracket or flat surface.
Due to the sliding feature the device or device cradle can easily be removed from the mount. Your device may have a windshield suction cup mount attached to the AMPS holes. If so, this has to be removed before you can attach the male plate. The pictures show the device mounting adapter in use with a Sirius ratellite receiver and a ProClip Mounting Platform.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215283
£
12.99
inc. Vat
Headset Hook. For Brodit Accessories phone and smartphone holders.
A hook for hanging a headset, portable handsfree, charging cable etc neatly in place by your holder. The hook is to be installed between the device holder and the ProClip Mounting Platform.
For use with Brodit Accessories phone and smartphone holders. Fits holders both with and without tilt swivel. 2 screws included in the package.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215285
£
12.99
inc. Vat
Headset Hook. For Brodit Accessories phone/smartphone holders or Brodit Accessories holders.
A hook for hanging a headset, portable handsfree, charging cable etc neatly in place by your holder. The hook is to be installed between the device holder and the ProClip Mounting Platform.
The package contains two hooks with different sized mounting plates. Choose the hook with a smaller mounting plate for use with Brodit Accessories phone/smartphone holders or the hook with a larger mounting plate for use with Brodit Accessories handheld holders.
Fits holders both with and without tilt swivel. 2 screws included in the package.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Water Resistant Case
for
Brodit
Accessories
Stock : 1 - 3 [ call to confirm ]
Item No. :
215345
£
129.49
inc. Vat
Brodit Accessories holder for motorcycles. 31,8 mm diameter.
Water resistant case for installation of a Brodit Accessories on a motorcycle. Allows you to operate your Brodit Accessories while driving your motorcycle, regardless of the weather.
When the Brodit Accessories is in the case, it is well protected from rain and dust. You can take the case with the Brodit Accessories with you when leaving the motorcycle. It is easy to put the Brodit Accessories in the case, and to take it out of the case. You can have a charging- or GPS-cable as well as a headset connected to the Brodit Accessories when it is in the case. The case is attached onto a tilt swivel, so you can adjust your Brodit Accessories for easier viewing.
The installation of the water resistant case is quick and easy. The water resistant case has a protective hard shell with a soft transparent front. (Not water proof, do not put in water)
Fits HP iPAQ 55xx-series and Brodit Accessories smaller than that, for example HP 22xx-series, Qtek 2020, O2 XDA II etc.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
Solution
Mounting Accessories
for
Brodit
Accessories
Stock : 6
Item No. :
240411
£
8.99
inc. Vat
Gap opener, big.
A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With thin ends, one pointy and one level end. Manufacutred in black ABS plastic.
The ProClip is a mounting bracket for the Opel Signum's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Opel Signum. Made in black ABS plastic. Comes with detailed instructions.
Holden Vectra C ProClip Center mount
Stock : 5
Item No. : 653076
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Holden Vectra C's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Holden Vectra C. Made in black ABS plastic. Comes with detailed instructions.
TomTom One 3rd Edition Mount with tilt swivel
Stock : 4
Item No. : 215188
£ 24.99 incl. Vat
Click Image to enlarge
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount.
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
Citroen C2 ProClip Center mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 853750
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Citroen C2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C2. Made in black ABS plastic. Comes with detailed instructions.
Nokia 3120 Active Holder Tilt Swivel
Stock : 7
Item No. : 968909
£ 34.98 incl. Vat
Click Image to enlarge
With cig-plug.
Are you using your smartphone for navigation? Then you should keep your unit in an active holder attached onto the dashboard in your vehicle! There are active holders with cigarette lighter plug or for fixed installation. The holders are attached onto a tilt swivel, so you can adjust them in order to avoid light reflection in the display. 12/24 Volt.
Attach the holder onto a ProClip Mounting Platform and you will always have your phone within easy reach. Safe and convenient!
Citroen C2 ProClip Angled mount
Stock : 4
Item No. : 653751
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Citroen C2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C2. Made in black ABS plastic. Comes with detailed instructions.
Citroen C2 ProClip Center mount
Stock : 4
Item No. : 653750
£ 15.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Citroen C2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C2. Made in black ABS plastic. Comes with detailed instructions.
Nokia N80 Passive Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 875087
£ 21.99 incl. Vat
Click Image to enlarge
When keeping your Nokia N80 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia N80 when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
Nokia N95 4GB Passive Holder Tilt Swivel
Stock : 6
Item No. : 875156
£ 21.99 incl. Vat
Click Image to enlarge
When keeping your Nokia N95 4GB in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia N95 4GB when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
Click Image to enlarge
