Brodit
GPS
Passive Holder Tilt Swivel
for
Navigon
6310
Stock : Stock on Order - delivery approx. 7-10 days
Item No. :
272028
£
24.71
inc. Vat
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.
Brodit
GPS
Holder with Pass-Through Connector
for
Navigon
6310
Stock : 1
Item No. :
277028
£
47.52
inc. Vat
Passive holder with tilt swivel.
Passive holder with pass-through connector. All cables that can be used with the GPS device can also be used with the holder, for example a charging cable or a TMC cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder.
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
Brodit
GPS
Active Holder Tilt Swivel
for
Navigon
6310
Stock : Stock on Order - delivery approx. 7-10 days
Item No. :
278028
£
47.52
inc. Vat
With tilt swivel. With TMC connectivity, TMC antenna included. 12/24 Volt.
The choice for you who want to have your GPS neatly and safely installed! Your GPS will be within easy sight and reach, installed onto the dashboard instead of the windshield giving you clear sight. And by using an active holder, you never have to worry about running out of battery.
The holder has a TMC connector, you easily attach the enclosed TMC antenna to the holder. The holder is equipped with a spiral charging cable with cig-plug which is to be connected to the vehicle's 12 Volt socket. So the holder provides both charging and TMC connectivity to your device. 12/24 Volt.
You can easily take the GPS with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.
Brodit
GPS
Active Holder Tilt Swivel
for
Navigon
6310
Stock : Brodit Brand New Item - PreOrder Yours NOW !
Item No. :
279028
£
61.77
inc. Vat
With tilt swivel. With TMC connectivity, TMC antenna included. 12/24 Volt.
The choice for you who want to have your GPS neatly and safely installed! Your GPS will be within easy sight and reach, installed onto the dashboard instead of the windshield giving you clear sight. The holder is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! And by using an active holder, you never have to worry about running out of battery.
The holder has a TMC connector, you easily attach the enclosed TMC antenna to the holder. So the holder provides both charging and TMC connectivity to your device.
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
Charging specifications: Input voltage: DC/10-30V Charging voltage: DC/4.75-5.3V Output current(Typ): 2.0A Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red) Operating temperature: 0°C ~ +40°C Storage temperature: -20°C ~ +80°C RoHS compliant: ROHS
Stock : Stock on Order - delivery approx. 7-10 days
Item No. : 653370
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Mazda 3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda 3. Made in black ABS plastic. Comes with detailed instructions.
Opel Signum ProClip Center mount
Stock : Stock on Order - delivery approx. 7-10 days
Item No. : 853076
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Opel Signum's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Opel Signum. Made in black ABS plastic. Comes with detailed instructions.
Brodit Accessories Mounting Accessories
Stock : Stock on Order - delivery approx. 7-10 days
Item No. : 213093
£ 12.34 incl. Vat
Click Image to enlarge
MoveClip for Tilt swivel, with predrilled holes. 1 female + 1 male + 2 screws. 50 x 42 x 5 mm.
The Move Clip system is basically a female plate with a wide V-slot and a male plate that is shaped to fit into the V-slot in the female plate. The male plate slides into the female plate.
The female plate attaches to a mounting bracket or any kind of flat surface. The male plate attaches on the back of your device or on your device holder/cradle.
The Move Clip System can be used in vehicles, boats, RV's, walls, computer monitors etc. You can have as many of each part as you want to. This Move Clip Kit is for moving one device in and out of one vehicle.
BMW 1-series ProClip Center mount
Stock : 3
Item No. : 653523
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the BMW 1-series's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 1-series. Made in black ABS plastic. Comes with detailed instructions.
Mazda 6 ProClip Angled mount
Stock : Stock on Order - delivery approx. 7-10 days
Item No. : 654266
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Mazda 6's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda 6. Made in black ABS plastic. Comes with detailed instructions.
Peugeot 306 ProClip Center mount
Stock : Stock on Order - delivery approx. 7-10 days
Item No. : 652467
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Peugeot 306's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Peugeot 306. Made in black ABS plastic. Comes with detailed instructions.
Volvo XC60 ProClip Center mount
Stock : Stock on Order - delivery approx. 7-10 days
Item No. : 654256
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Volvo XC60's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo XC60. Made in black ABS plastic. Comes with detailed instructions.
This ProClip can not be combined with item no 654259, both of them can not be installed in the same time in one Volvo XC60.
Volvo XC90 ProClip Center mount
Stock : Stock on Order - delivery approx. 7-10 days
Item No. : 653171
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Volvo XC90's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo XC90. Made in black ABS plastic. Comes with detailed instructions.
Audi A3 ProClip Right mount
Stock : 2
Item No. : 603416
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Audi A3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A3. Made in black ABS plastic. Comes with detailed instructions.
Audi A3 ProClip Angled mount NOT for models with factory navigation.
Stock : 2
Item No. : 653991
£ 15.2 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Audi A3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A3. Made in black ABS plastic. Comes with detailed instructions.