Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   audi a3   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   blackberry   tomtom 720   iPhone 7   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 14 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit GPS  Mount with tilt swivel for TomTom  GO 520

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215267

£ 22.80

inc. Vat



The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215267


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit GPS  Active Holder Tilt Swivel for TomTom  GO 520

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215268

£ 43.72

inc. Vat


With tilt swivel.


The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215268


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit GPS  Active Holder Tilt Swivel for TomTom  GO 520

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215269

£ 61.77

inc. Vat


With tilt swivel. 12/24 Volt, 2 A charger.


The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215269


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit GPS  Active Dock Holder with Tilt Swivel for TomTom  GO 520

Stock : Stock on Order - approx 7-10 days

Item No. : 215941

£ 47.52

inc. Vat



Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach!

If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled micro USB charging cable, item no. 941001. (941001 can not be used for TMC).

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. (Cable not included.)



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215941


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit GPS  Active Dock Holder with Tilt Swivel for TomTom  GO 520

Stock : 1

Item No. : 215942

£ 50.42

inc. Vat


With Cigarette Lighter Cable, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.


Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach for example a charging cable or a TMC cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. The enclosed cable gives 2A charging via the Micro-USB connector. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. The enclosed cable can not be used for TMC.

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +60C
Approvals: E, CE, FCC, ROHS



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215942


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit GPS  Active Dock Holder with Tilt Swivel for TomTom  GO 520

Stock : 2

Item No. : 215943

£ 76.61

inc. Vat


With straight cable for fixed installation.


Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach a charging cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. The enclosed cable can not be used for TMC.

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215943


Attach the Brodit GPS Holder for TomTom  GO 520 onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

Ford Fusion ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653192

£ 15.2 incl. Vat
Brodit Ford Fusion ProClip 03-05 UK Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Fusion's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fusion. Made in black ABS plastic. Comes with detailed instructions.

Toyota Corolla Verso ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 853477

£ 15.2 incl. Vat
Brodit Toyota Corolla Verso ProClip 04-09 Europe Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Toyota Corolla Verso's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Corolla Verso. Made in black ABS plastic. Comes with detailed instructions.

Apple iPhone 3G Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875246

£ 24.71 incl. Vat
Brodit Apple iPhone 3G Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
When keeping your Apple iPhone 3G in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone 3G when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Volvo V70 II ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654676

£ 15.2 incl. Vat
Brodit Volvo V70 II ProClip 12-16 All Countries Center mount ONLY for wood grain panel.

Click Image to enlarge


ONLY for wood grain panel.
The ProClip is a mounting bracket for the Volvo V70 II's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo V70 II. Made in black ABS plastic. Comes with detailed instructions.

BMW 520-540-M5 E39 ProClip Console mount Angled

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 632281

£ 15.51 incl. Vat
Brodit BMW 520-540-M5 E39 ProClip 96-03 All Countries Console mount  Angled

Click Image to enlarge



The ProClip is a mounting bracket for the BMW 520-540-M5 E39's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 520-540-M5 E39. Made in black ABS plastic. Comes with detailed instructions.

Mercedes Benz E-Class (200-430) Sedan-Coupe ProClip Center mount High

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653083

£ 15.2 incl. Vat
Brodit Mercedes Benz E-Class (200-430) Sedan-Coupe ProClip 02-09 All Countries Center mount  High

Click Image to enlarge



The ProClip is a mounting bracket for the Mercedes Benz E-Class (200-430) Sedan-Coupe's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mercedes Benz E-Class (200-430) Sedan-Coupe. Made in black ABS plastic. Comes with detailed instructions.

Land Rover Range Rover Evoque ProClip Angled mount

Stock : 1

Item No. : 654702

£ 15.2 incl. Vat
Brodit Land Rover Range Rover Evoque ProClip 12-16 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Land Rover Range Rover Evoque's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Range Rover Evoque. Made in black ABS plastic. Comes with detailed instructions.

Ford Tourneo Connect ProClip Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 603206

£ 15.2 incl. Vat
Brodit Ford Tourneo Connect ProClip 03-09 UK Right mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Tourneo Connect's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Tourneo Connect. Made in black ABS plastic. Comes with detailed instructions.

Kia Sorento ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653174

£ 15.2 incl. Vat
Brodit Kia Sorento ProClip 02-07 All Countries Center mount ONLY for models with brown wood grain panel.

Click Image to enlarge


ONLY for models with brown wood grain panel.
The ProClip is a mounting bracket for the Kia Sorento's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Kia Sorento. Made in black ABS plastic. Comes with detailed instructions.

Seat Leon ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653715

£ 15.2 incl. Vat
Brodit Seat Leon ProClip 06-12 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Seat Leon's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Seat Leon. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories