Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   audi a3   sun visor   942044   ford mondeo   xc60   iphone 4   iPad   Samsung Galaxy S8   icom   Brodit iPhone   blackberry   Samsung galaxy s8   hp 6915   tomtom 720  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 3 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Navigation  Active Dock Holder with Tilt Swivel for TomTom  Go 620

Stock : 5

Item No. : 215941

£ 47.52

inc. Vat



Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach!

If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled micro USB charging cable, item no. 941001. (941001 can not be used for TMC).

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. (Cable not included.)



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215941


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Navigation  Active Dock Holder with Tilt Swivel for TomTom  Go 620

Stock : 2

Item No. : 215942

£ 50.42

inc. Vat


With Cigarette Lighter Cable, 2A charging. With USB A outlet in the cig-plug, 1A charging. 12/24V.


Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach for example a charging cable or a TMC cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. The enclosed cable gives 2A charging via the Micro-USB connector. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. The enclosed cable can not be used for TMC.

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.25V
Output current(Typ): 2.0A
LED charging indicator: Power on.
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +60C
Approvals: E, CE, FCC, ROHS



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215942


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Navigation  Active Dock Holder with Tilt Swivel for TomTom  Go 620

Stock : 3

Item No. : 215943

£ 76.61

inc. Vat


With straight cable for fixed installation.


Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach a charging cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. The enclosed cable can not be used for TMC.

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215943


Attach the Brodit Navigation Holder for TomTom  Go 620 onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

Nissan Navara ProClip Center mount

Stock : 1

Item No. : 655196

£ 15.2 incl. Vat
Brodit Nissan Navara ProClip 16-16 All Countries Center mount NP300 <br>

Click Image to enlarge


NP300

The ProClip is a mounting bracket that you attach onto the Nissan Navara's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!

The ProClip has a perfect fit, it is custom made for each Nissan Navara to ensure a secure base for installations. And the ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.

View demo video

Mazda 2 ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654128

£ 15.2 incl. Vat
Brodit Mazda 2 ProClip 08-10 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mazda 2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda 2. Made in black ABS plastic. Comes with detailed instructions.

BMW 1-series ProClip Center mount

Stock : 3

Item No. : 654721

£ 15.2 incl. Vat
Brodit BMW 1-series ProClip 12-13 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the BMW 1-series's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 1-series. Made in black ABS plastic. Comes with detailed instructions.

Mercedes Benz CLS-Class ProClip Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 633625

£ 15.2 incl. Vat
Brodit Mercedes Benz CLS-Class ProClip 05-10 All Countries Console mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mercedes Benz CLS-Class's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mercedes Benz CLS-Class. Made in black ABS plastic. Comes with detailed instructions.

Citroen Jumper ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 655085

£ 15.2 incl. Vat
Brodit Citroen Jumper ProClip 15-16 UK Center mount

Click Image to enlarge



The ProClip is a mounting bracket that you attach onto the Citroen Jumper's dashboard. It provides a mounting platform for mobile phones and other devices that you want to have within easy sight and reach in the car. Safe, neat and convenient! The ProClip has a perfect fit, it is custom made for each Citroen Jumper to ensure a secure base for installations.

The ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed installation instructions. The mounting plate is equipped with predrilled holes which make the installation of equipment on the ProClip easier. The holes suit all Brodit holders and other products with standard holes, the hole pattern constists of one set of AMPS-holes as well as two sets of double-holes placed in different height.

View demo video

Apple iPhone 6S Holder for Cable Attachment 

Stock : 5

Item No. : 514795

£ 40.87 incl. Vat
Brodit Apple iPhone 6S Holder for Cable Attachment  All Countries  <span class = 'lightning' >For use with Apple original Lightning to USB Cable.</span> Adjustable holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm.

Click Image to enlarge


For use with Apple original Lightning to USB Cable. Adjustable holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm.
This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with the Apple original Lightning to USB Cable that came with your iPhone 6s (Apple article. no. MD818AM/A. You can charge you iPhone by connecting it to the car's USB socket, or use it with a USB/cig-plug adapter for the car's 12V socket.

To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder. Fits devices with slim sized skins. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Nissan GTR ProClip Angled mount

Stock : 2

Item No. : 654417

£ 15.2 incl. Vat
Brodit Nissan GTR ProClip 09-16 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Nissan GTR's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Nissan GTR. Made in black ABS plastic. Comes with detailed instructions.

Ford Fusion ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653797

£ 15.2 incl. Vat
Brodit Ford Fusion ProClip 06-12 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Fusion's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fusion. Made in black ABS plastic. Comes with detailed instructions.

Ford Fusion ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653798

£ 15.2 incl. Vat
Brodit Ford Fusion ProClip 06-12 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Fusion's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Fusion. Made in black ABS plastic. Comes with detailed instructions.

Apple iPhone 6 Plus Holder for Cable Attachment 

Stock : 6

Item No. : 514667

£ 40.87 incl. Vat
Brodit Apple iPhone 6 Plus Holder for Cable Attachment  All Countries  <span class = 'lightning' >For use with Apple original Lightning to USB Cable.</span> Adjustable holder. Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 2-10 mm.

Click Image to enlarge


For use with Apple original Lightning to USB Cable. Adjustable holder. Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 2-10 mm.
This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB Cable (Apple article. no. MD818ZM/A. You can charge you iPhone by connecting it to the car's USB socket, or use it with a USB/cig-plug adapter for the car's 12V socket.

Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories