Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
i e href   apple   nokia   i h   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   942044   i href   ford mondeo   a 647   xc60   iphone 4   a h   Samsung Galaxy Nexus   iPad   a hx   a href   icom  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Browse Accessories by

Brand

Category

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

We Found 283 Item(s) that match your Search

STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting equipment for Brodit  Accessories

Stock : 1 - 3 [ call to confirm ]

Item No. : 213005

£ 12.73

inc. Vat


MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.


Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.




Item No :213005


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting equipment for Brodit  Accessories

Stock : 7

Item No. : 213006

£ 12.73

inc. Vat


MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.


Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.




Item No :213006


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  MoveClip for Brodit  Accessories

Stock : 5

Item No. : 215503

£ 12.73

inc. Vat


MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws.


MultiMoveClip is for you who easily want to switch between different device holders on the same ProClip. Perfect if you have different cell phones but drive the same car, or if you want to place your GPS where the cell phone usually sits. You attach the MultiMoveClip onto your ProClip in your car and it is then ready to use with your device holders of choice. Your device holders are fitted just as secure as if they were screwed directly onto the ProClip.

MultiMoveClip fits with all Brodit's holders with tilt swivel. There are two sizes of tilt swivels and to be able to fit even the smaller size two adapter plates are enclosed with the delivery. Combined with item no 215504 MultiMoveClip also fits holders without tilt swivel.

MultiMoveClip film!



Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


Item No :215503


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Passive holder with tilt swivel for Brodit  Accessories

Stock : 5

Item No. : 511307

£ 29.39

inc. Vat


Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm.


Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :511307


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Passive holder with tilt swivel for Brodit  Accessories

Stock : 4

Item No. : 511479

£ 29.39

inc. Vat


Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm.


Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.




Item No :511479


STEP 1- Choose the Brodit Holder
STEP 2- Choose the Brodit ProClip

Brodit Solution  Mounting equipment for Brodit  Accessories

Stock : 2

Item No. : 213008

£ 12.73

inc. Vat


Extension plate, 149x69x5 mm. (3 pieces/pack)


The extension plate makes it possible two attach to units onto the same ProClip, e.g. a Brodit Accessories holder as well as a Brodit Accessories phone holder. Comes with screws and adhesive tape on the back. Two predrilled holes.

Dimensions: 149x69x5 mm




Item No :213008


Attach the Brodit Solution Holder for Brodit  Accessories onto your chosen Brodit Proclip for a true dashboard mounting solution

Customers Also Viewed

TomTom One 3rd Edition Active Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 215201

£ 45.07 incl. Vat
Brodit TomTom One 3rd Edition Active Holder  Tilt Swivel  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Apple iPod Nano Video Passive Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 840760

£ 25.47 incl. Vat
Brodit Apple iPod Nano Video Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
With your iPod in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPod in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Holden Vectra C ProClip Center mount

Stock : 1

Item No. : 653076

£ 15.67 incl. Vat
Brodit Holden Vectra C ProClip 02-10 Australia Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Holden Vectra C's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Holden Vectra C. Made in black ABS plastic. Comes with detailed instructions.

BlackBerry Bold Active Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 968850

£ 34.99 incl. Vat
Brodit BlackBerry Bold Active Holder  Tilt Swivel  All Countries  With cig-plug.

Click Image to enlarge


With cig-plug.
The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

BMW 316-330-M3 E46 ProClip Center mount

Stock : 1

Item No. : 652599

£ 15.67 incl. Vat
Brodit BMW 316-330-M3 E46 ProClip 98-04 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the BMW 316-330-M3 E46's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 316-330-M3 E46. Made in black ABS plastic. Comes with detailed instructions.

Garmin Nuvi 200 Mounting Accessories 

Stock : 1 - 3 [ call to confirm ]

Item No. : 215116

£ 17.99 incl. Vat
Brodit Garmin Nuvi 200 Mounting Accessories  All Countries  Tilt swivel mount.

Click Image to enlarge


Tilt swivel mount.
Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.

With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.

Apple iPod Touch 2nd Generation Passive Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 848861

£ 25.47 incl. Vat
Brodit Apple iPod Touch 2nd Generation Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
With your iPod in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPod in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Apple iPhone 4 Active Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 521165

£ 63.68 incl. Vat
Brodit Apple iPhone 4 Active Holder  Tilt Swivel  All Countries  With tilt swivel. With USB cable. Apple approved charging cable. Adjustable holder. Fits devices with skin.

Click Image to enlarge


With tilt swivel. With USB cable. Apple approved charging cable. Adjustable holder. Fits devices with skin.
Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin or with Apple original Bumper (does NOT fit for iPhone without skin).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Citroen Berlingo 2 ProClip Center mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 653143

£ 15.67 incl. Vat
Brodit Citroen Berlingo 2 ProClip 03-08 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Citroen Berlingo 2's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Berlingo 2. Made in black ABS plastic. Comes with detailed instructions.

TomTom GO 520 T Active Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 273006

£ 45.07 incl. Vat
Brodit TomTom GO 520 T Active Holder  Tilt Swivel  All Countries  With tilt swivel. With TMC connectivity (round plug).

Click Image to enlarge


With tilt swivel. With TMC connectivity (round plug).
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt. Fits devices with a TMC module with a round plug. (TMC module not included).

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories