Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   i e href   Samsung galaxy s8   icom   Brodit iPhone   blackberry   i h  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 15 Item(s) that match your Search
 

 Brodit ProClip for Audi A1  - Right mount

Stock : 2

Item No. : 604816

£ 15.20 incl. Vat

Item No. : 604816 for Years 11-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Audi A1. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Audi A1's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A1. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Audi A1  - Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654610

£ 15.20 incl. Vat

Item No. : 654610 for Years 11-11 in All Countries

The images show the mounting position for the Brodit ProClip for your Audi A1. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Audi A1's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A1. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Audi A1  - Angled mount

Stock : 3

Item No. : 654756

£ 15.20 incl. Vat

Item No. : 654756 for Years 12-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Audi A1. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Audi A1's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A1. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Audi A1  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654815

£ 15.20 incl. Vat

Item No. : 654815 for Years 11-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Audi A1. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Audi A1's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A1. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Audi A1  - Left mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 804816

£ 15.20 incl. Vat

Item No. : 804816 for Years 11-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Audi A1. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Audi A1's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A1. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Audi A1  - Angled mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854610

£ 15.20 incl. Vat

Item No. : 854610 for Years 11-11 in All Countries

The images show the mounting position for the Brodit ProClip for your Audi A1. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Audi A1's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A1. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Nokia E71 Passive holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 870242

£ 15.2 incl. Vat
Brodit Nokia E71 Passive holder  All Countries

Click Image to enlarge



When keeping your Nokia E71 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia E71 when it is in the holder. Accommodates all battery sizes. Attach onto a ProClip Mounting Platform.

Apple iPhone 4 Passive Holder Tilt Swivel 

Stock : 1

Item No. : 511165

£ 24.71 incl. Vat
Brodit Apple iPhone 4 Passive Holder Tilt Swivel  All Countries  Adjustable holder. Fits devices with skin (NOT for Apple original Bumper).

Click Image to enlarge


Adjustable holder. Fits devices with skin (NOT for Apple original Bumper).
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Samsung Galaxy S II i9100 Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511255

£ 24.71 incl. Vat
Brodit Samsung Galaxy S II i9100 Passive holder with tilt swivel   All Countries

Click Image to enlarge



Keep your Galaxy S II in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the Galaxy S II when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Also fits with Samsung 2000mAh thicker battery. Attach onto ProClip Mounting Platform.

Samsung Galaxy S II i9100 Active holder with cig-plug. 

Stock : 1

Item No. : 512255

£ 43.72 incl. Vat
Brodit Samsung Galaxy S II i9100 Active holder with cig-plug.   All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Also fits with Samsung 2000mAh thicker battery. Attach onto a ProClip Mounting Platform.

Apple iPhone 4 Holder with Pass-Through Connector 

Stock : 1

Item No. : 516165

£ 61.77 incl. Vat
Brodit Apple iPhone 4 Holder with Pass-Through Connector  All Countries  Adjustable holder. Fits devices with skin.

Click Image to enlarge


Adjustable holder. Fits devices with skin.
Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. (Cable not included)

Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin or with Apple original Bumper (does NOT fit for iPhone without skin). The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Apple iPhone 4 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511164

£ 24.71 incl. Vat
Brodit Apple iPhone 4 Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Ford Galaxy ProClip Center mount

Stock : 2

Item No. : 653865

£ 15.2 incl. Vat
Brodit Ford Galaxy ProClip 07-14 UK Center mount For models both with and without upper storage compartment.

Click Image to enlarge


For models both with and without upper storage compartment.
The ProClip is a mounting bracket for the Ford Galaxy's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Galaxy. Made in black ABS plastic. Comes with detailed instructions.

HTC Desire Passive Holder Tilt Swivel 

Stock : 1

Item No. : 511141

£ 24.71 incl. Vat
Brodit HTC Desire Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



When keeping your unit in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the unit when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Volkswagen UP ProClip Angled mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854737

£ 15.2 incl. Vat
Brodit Volkswagen UP ProClip 12-14 Europe Angled mount NOT for Seat Mii Entry. NOT for Skoda Citigo Active and Arctic. NOT for Volkswagen UP Take Up.

Click Image to enlarge


NOT for Seat Mii Entry. NOT for Skoda Citigo Active and Arctic. NOT for Volkswagen UP Take Up.
The ProClip is a mounting bracket for the Volkswagen UP's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen UP. Made in black ABS plastic. Comes with detailed instructions.

HTC One S Z520e Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511386

£ 24.71 incl. Vat
Brodit HTC One S Z520e Passive holder with tilt swivel   All Countries

Click Image to enlarge



When keeping your HTC in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories