Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   i e href   Samsung galaxy s8   icom   Brodit iPhone   blackberry   i h  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 12 Item(s) that match your Search
 

 Brodit ProClip for Citroen C-Zero  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604670

£ 15.20 incl. Vat

Item No. : 604670 for Years 10-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Citroen C-Zero. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen C-Zero's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C-Zero. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen C-Zero  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654628

£ 15.20 incl. Vat

Item No. : 654628 for Years 10-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Citroen C-Zero. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen C-Zero's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C-Zero. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen C-Zero  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854628

£ 15.20 incl. Vat

Item No. : 854628 for Years 10-16 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen C-Zero. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen C-Zero's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C-Zero. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen C-Zero  - Left mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 804670

£ 15.51 incl. Vat

Item No. : 804670 for Years 10-16 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen C-Zero. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen C-Zero's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen C-Zero. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen C-Zero  - Headrest mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 810920

£ 38.79 incl. Vat

Item No. : 810920 for Years 10-12 in All Countries

The images show the mounting position for the Brodit Headrest mount with monitor mount for your Citroen C-Zero. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).



For installation of Tablet DVD and multimedia screens in Citroen C-Zero. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Citroen C-Zero. The installation is quick and will not damage the interior of the Citroen C-Zero.

The head rest screen mount fits a number of Citroen C-Zero, some of them are listed here. Are you missing a model? Measure the head rest in you Citroen C-Zero, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Citroen C-Zero.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen C-Zero  - Headrest mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 810920

£ 38.79 incl. Vat

Item No. : 810920 for Years 10-12 in Europe

The images show the mounting position for the Brodit Headrest mount with monitor mount for your Citroen C-Zero. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).



For installation of Tablet DVD and multimedia screens in Citroen C-Zero. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Citroen C-Zero. The installation is quick and will not damage the interior of the Citroen C-Zero.

The head rest screen mount fits a number of Citroen C-Zero, some of them are listed here. Are you missing a model? Measure the head rest in you Citroen C-Zero, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Citroen C-Zero.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

Customers Also Viewed

Acura RL Headrest mount Headrest mount

Stock : 1

Item No. : 810820

£ 40.87 incl. Vat
Brodit Acura RL Headrest mount 05-13 USA Headrest mount For multimedia-monitors with a vertical slot in back.

Click Image to enlarge


For multimedia-monitors with a vertical slot in back.
For installation of multimedia screens in Acura RL. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Acura RL. The installation is quick and will not damage the interior of the Acura RL.

The head rest screen mount fits a number of Acura RL, some of them are listed here. Are you missing a model? Measure the head rest in you Acura RL, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Acura RL.

BMW 318-330-E90-E91-E92 Headrest mount Headrest mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 810810

£ 40.87 incl. Vat
Brodit BMW 318-330-E90-E91-E92 Headrest mount 05-10 All Countries Headrest mount For multimedia-monitors with a vertical slot in back.

Click Image to enlarge


For multimedia-monitors with a vertical slot in back.
For installation of multimedia monitors in BMW 318-330-E90-E91-E92. Fits monitors with a vertical slot on the back side. The monitor mount is placed onto a front seat's headrest. It comes with a tilt swivel so the monitor can be adjusted in order to avoid reflection. It's easy to take the monitor with you when leaving the BMW 318-330-E90-E91-E92. The installation is quick and will not damage the interior of the BMW 318-330-E90-E91-E92.

The headrest monitor mount fits a number of BMW 318-330-E90-E91-E92, some of them are listed here. Are you missing a model? Measure the headrest in you BMW 318-330-E90-E91-E92, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your BMW 318-330-E90-E91-E92.

Mercedes Benz B-Class ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 853660

£ 15.2 incl. Vat
Brodit Mercedes Benz B-Class ProClip 05-11 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mercedes Benz B-Class's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mercedes Benz B-Class. Made in black ABS plastic. Comes with detailed instructions.

LG Nexus 4 E960 Active holder for fixed installation. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 513482

£ 61.77 incl. Vat
Brodit LG Nexus 4 E960 Active holder for fixed installation.   All Countries  With tilt swivel, with Molex adapter system. 2A charger.

Click Image to enlarge


With tilt swivel, with Molex adapter system. 2A charger.
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.

Nissan Leaf ProClip Center mount

Stock : 1

Item No. : 654706

£ 15.2 incl. Vat
Brodit Nissan Leaf ProClip 11-16 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Nissan Leaf's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Nissan Leaf. Made in black ABS plastic. Comes with detailed instructions.

LG Nexus 4 E960 Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512482

£ 43.72 incl. Vat
Brodit LG Nexus 4 E960 Active holder with cig-plug.  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your smartphone when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Mini Cooper Country Man ProClip Angled mount

Stock : 6

Item No. : 654662

£ 15.2 incl. Vat
Brodit Mini Cooper Country Man ProClip 10-16 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mini Cooper Country Man's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mini Cooper Country Man. Made in black ABS plastic. Comes with detailed instructions.

Google Nexus 7 Passive holder with tilt swivel 

Stock : 2

Item No. : 511412

£ 36.11 incl. Vat
Brodit Google Nexus 7 Passive holder with tilt swivel  All Countries

Click Image to enlarge



With your Nexus 7 in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the Nexus 7 when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the device into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Google Nexus 7 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

Brodit Accessories Passive holder with tilt swivel 

Stock : 7

Item No. : 511308

£ 28.51 incl. Vat
Brodit Brodit Accessories Passive holder with tilt swivel   All Countries  Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm.

Click Image to enlarge


Adjustable holder. Fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm.
Keep your phone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient!

The adjustable holder fits for devices with and without skin with the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).

Before using the holder you set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories