Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   i e href   Samsung galaxy s8   icom   Brodit iPhone   blackberry   i h  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 12 Item(s) that match your Search
 

 Brodit ProClip for Citroen DS4  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604591

£ 15.20 incl. Vat

Item No. : 604591 for Years 11-16 in UK

The images show the mounting position for the Brodit ProClip for your Citroen DS4. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen DS4's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen DS4. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen DS4  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654590

£ 15.20 incl. Vat

Item No. : 654590 for Years 11-16 in UK

The images show the mounting position for the Brodit ProClip for your Citroen DS4. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen DS4's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen DS4. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen DS4  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854590

£ 15.20 incl. Vat

Item No. : 854590 for Years 11-16 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen DS4. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen DS4's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen DS4. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen DS4  - Left mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 804591

£ 15.51 incl. Vat

Item No. : 804591 for Years 11-16 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen DS4. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen DS4's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen DS4. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen DS4  - Headrest mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 810920

£ 38.79 incl. Vat

Item No. : 810920 for Years 11-12 in Europe

The images show the mounting position for the Brodit Headrest mount with monitor mount for your Citroen DS4. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).



For installation of Tablet DVD and multimedia screens in Citroen DS4. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Citroen DS4. The installation is quick and will not damage the interior of the Citroen DS4.

The head rest screen mount fits a number of Citroen DS4, some of them are listed here. Are you missing a model? Measure the head rest in you Citroen DS4, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Citroen DS4.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen DS4  - Headrest mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 810920

£ 38.79 incl. Vat

Item No. : 810920 for Years 11-12 in UK

The images show the mounting position for the Brodit Headrest mount with monitor mount for your Citroen DS4. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).



For installation of Tablet DVD and multimedia screens in Citroen DS4. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Citroen DS4. The installation is quick and will not damage the interior of the Citroen DS4.

The head rest screen mount fits a number of Citroen DS4, some of them are listed here. Are you missing a model? Measure the head rest in you Citroen DS4, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Citroen DS4.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

Customers Also Viewed

Acura RL Headrest mount Headrest mount

Stock : 1

Item No. : 810820

£ 40.87 incl. Vat
Brodit Acura RL Headrest mount 05-13 USA Headrest mount For multimedia-monitors with a vertical slot in back.

Click Image to enlarge


For multimedia-monitors with a vertical slot in back.
For installation of multimedia screens in Acura RL. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Acura RL. The installation is quick and will not damage the interior of the Acura RL.

The head rest screen mount fits a number of Acura RL, some of them are listed here. Are you missing a model? Measure the head rest in you Acura RL, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Acura RL.

BMW 318-330-E90-E91-E92 Headrest mount Headrest mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 810810

£ 40.87 incl. Vat
Brodit BMW 318-330-E90-E91-E92 Headrest mount 05-10 All Countries Headrest mount For multimedia-monitors with a vertical slot in back.

Click Image to enlarge


For multimedia-monitors with a vertical slot in back.
For installation of multimedia monitors in BMW 318-330-E90-E91-E92. Fits monitors with a vertical slot on the back side. The monitor mount is placed onto a front seat's headrest. It comes with a tilt swivel so the monitor can be adjusted in order to avoid reflection. It's easy to take the monitor with you when leaving the BMW 318-330-E90-E91-E92. The installation is quick and will not damage the interior of the BMW 318-330-E90-E91-E92.

The headrest monitor mount fits a number of BMW 318-330-E90-E91-E92, some of them are listed here. Are you missing a model? Measure the headrest in you BMW 318-330-E90-E91-E92, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your BMW 318-330-E90-E91-E92.

Mercedes Benz B-Class ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 853660

£ 15.2 incl. Vat
Brodit Mercedes Benz B-Class ProClip 05-11 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mercedes Benz B-Class's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mercedes Benz B-Class. Made in black ABS plastic. Comes with detailed instructions.

Apple iPhone 4 Holder with Pass-Through Connector 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 516193

£ 70.34 incl. Vat
Brodit Apple iPhone 4 Holder with Pass-Through Connector   All Countries  For a more secure upright and horizontal position. Adjustable holder, fits devices with skins.

Click Image to enlarge


For a more secure upright and horizontal position. Adjustable holder, fits devices with skins.
Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. You can run the cable through the back part of the holder for an even cleaner look. (Cable not included)

The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! The holder provides a more secure upright and horizontal position than a standard holder. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. When keeping your iPhone in a passive holder, it is always within easy sight and reach.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with skin or with Apple original Bumper (does NOT fit for iPhone without skin).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Apple iPhone 5 Passive holder with tilt swivel 

Stock : 5

Item No. : 511422

£ 24.71 incl. Vat
Brodit Apple iPhone 5 Passive holder with tilt swivel  All Countries  Padded.

Click Image to enlarge


Padded.
Keep your iPhone 5 in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone 5 is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 5 without skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Sony Xperia P Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511406

£ 24.71 incl. Vat
Brodit Sony Xperia P Passive holder with tilt swivel   All Countries

Click Image to enlarge



When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Sony Xperia Acro S Active holder with cig-plug. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 512424

£ 43.72 incl. Vat
Brodit Sony Xperia Acro S Active holder with cig-plug.   All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your Acro S when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Apple iPad Mini Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511448

£ 29.09 incl. Vat
Brodit Apple iPad Mini Passive holder with tilt swivel  All Countries

Click Image to enlarge



With your iPad Mini in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Citroen DS3 ProClip Center mount

Stock : 3

Item No. : 654453

£ 15.2 incl. Vat
Brodit Citroen DS3 ProClip 10-16 All Countries Center mount NOT for models with navigation screen.

Click Image to enlarge


NOT for models with navigation screen.
The ProClip is a mounting bracket for the Citroen DS3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen DS3. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories