Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   Samsung Galaxy Nexus   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   blackberry   tomtom 720   iPhone 7   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 6 Item(s) that match your Search
 

 Brodit ProClip for Citroen Relay  - Right mount

Stock : 3

Item No. : 603878

£ 15.20 incl. Vat

Item No. : 603878 for Years 07-16 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Relay. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Relay's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Relay. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Relay  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652072

£ 15.20 incl. Vat

Item No. : 652072 for Years 94-01 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Relay. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Relay's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Relay. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Relay  - Angled mount

Stock : 1

Item No. : 653034

£ 15.20 incl. Vat

Item No. : 653034 for Years 02-06 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Relay. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Relay's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Relay. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Relay  - Angled mount Low

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653038

£ 15.20 incl. Vat

Item No. : 653038 for Years 02-06 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Relay. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Relay's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Relay. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Relay  - Center mount

Stock : 6

Item No. : 653876

£ 15.20 incl. Vat

Item No. : 653876 for Years 07-16 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Relay. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Relay's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Relay. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Relay  - Angled mount

Stock : 2

Item No. : 653877

£ 15.20 incl. Vat

Item No. : 653877 for Years 07-16 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Relay. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Relay's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Relay. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Dell Axim X50 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 968627

£ 33.95 incl. Vat
Brodit Dell Axim X50 Active Holder  Tilt Swivel  All Countries  With cigg-plug. 12/24 Volt.

Click Image to enlarge


With cigg-plug. 12/24 Volt.
The active holder charges your battery when it is in the holder. The charging device connects to the Dell Axim X50 automatically when you put the Dell Axim X50 in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt, 2 Amps. Attach onto a ProClip Mounting Platform.

HTC Hermes Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 968690

£ 33.95 incl. Vat
Brodit HTC Hermes Active Holder  Tilt Swivel  All Countries  With tilt swivel. For an upright, closed position.

Click Image to enlarge


With tilt swivel. For an upright, closed position.
The active holder charges your battery when it is in the holder. The charging device connects to the HTC Hermes automatically when you put the HTC Hermes in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Becker Traffic Assist PRO 7916 Mount with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215027

£ 24.71 incl. Vat
Brodit Becker Traffic Assist PRO 7916 Mount with tilt swivel  All Countries

Click Image to enlarge



More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

BMW X5 ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653656

£ 15.2 incl. Vat
Brodit BMW X5 ProClip 00-06 All Countries Center mount ONLY for models with navigation system.

Click Image to enlarge


ONLY for models with navigation system.
The ProClip is a mounting bracket for the BMW X5's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW X5. Made in black ABS plastic. Comes with detailed instructions.

HTC S710 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 965154

£ 33.95 incl. Vat
Brodit HTC S710 Active Holder  Tilt Swivel  All Countries  With tilt swivel. For a horizontal, open position. Padded.

Click Image to enlarge


With tilt swivel. For a horizontal, open position. Padded.
The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

TomTom GO 520 T Mount with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215267

£ 22.8 incl. Vat
Brodit TomTom GO 520 T Mount with tilt swivel  All Countries

Click Image to enlarge



The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

HTC Hermes Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 848691

£ 24.24 incl. Vat
Brodit HTC Hermes Passive Holder Tilt Swivel  All Countries  For a horizontal, open position.

Click Image to enlarge


For a horizontal, open position.
With your HTC Hermes in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. This holder holds your device in a horizontal open position. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the HTC Hermes in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the HTC Hermes when it is in the holder.

Renault Laguna ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653658

£ 15.2 incl. Vat
Brodit Renault Laguna ProClip 05-07 UK Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Renault Laguna's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Renault Laguna. Made in black ABS plastic. Comes with detailed instructions.

TomTom One 3rd Edition Mount with tilt swivel 

Stock : 2

Item No. : 215188

£ 23.74 incl. Vat
Brodit TomTom One 3rd Edition Mount with tilt swivel  All Countries

Click Image to enlarge



The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Renault Laguna ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 853658

£ 15.2 incl. Vat
Brodit Renault Laguna ProClip 05-07 Europe Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Renault Laguna's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Renault Laguna. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories