Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   Samsung Galaxy Nexus   fiat   sun visor   audi a3   Samsung Galaxy S8   942044   ford mondeo   Samsung galaxy s8   xc60   iphone 4   iPad   blackberry   Brodit iPhone   icom   hp 6915   tomtom 720  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 5 Item(s) that match your Search
 

 Brodit ProClip for Citroen Saxo  - Console mount

Stock : 7

Item No. : 632312

£ 15.20 incl. Vat

Item No. : 632312 for Years 96-01 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Saxo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Saxo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Saxo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Saxo  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652311

£ 15.20 incl. Vat

Item No. : 652311 for Years 96-01 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Saxo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Saxo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Saxo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Saxo  - Left mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 802310

£ 15.20 incl. Vat

Item No. : 802310 for Years 96-01 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen Saxo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Saxo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Saxo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Saxo  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 852311

£ 15.20 incl. Vat

Item No. : 852311 for Years 96-01 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen Saxo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Saxo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Saxo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Saxo  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 832312

£ 15.51 incl. Vat

Item No. : 832312 for Years 96-01 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen Saxo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Saxo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Saxo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Garmin Nuvi 200 Mounting Accessories 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215116

£ 17.45 incl. Vat
Brodit Garmin Nuvi 200 Mounting Accessories  All Countries  Tilt swivel mount.

Click Image to enlarge


Tilt swivel mount.
Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.

With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.

TomTom One 3rd Edition Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215189

£ 61.77 incl. Vat
Brodit TomTom One 3rd Edition Active Holder  Tilt Swivel  All Countries  With tilt swivel. 12/24 Volt, 2 A charger.

Click Image to enlarge


With tilt swivel. 12/24 Volt, 2 A charger.
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

Nokia N95 4GB Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875156

£ 23.27 incl. Vat
Brodit Nokia N95 4GB Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



When keeping your Nokia N95 4GB in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia N95 4GB when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

HTC Hermes Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 848690

£ 24.24 incl. Vat
Brodit HTC Hermes Passive Holder Tilt Swivel  All Countries  For an upright, closed position.

Click Image to enlarge


For an upright, closed position.
With your HTC Hermes in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. This holder holds your device in an upright closed position. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the HTC Hermes in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the HTC Hermes when it is in the holder.

O2 XDA Orbit 2 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 968796

£ 43.72 incl. Vat
Brodit O2 XDA Orbit 2 Active Holder  Tilt Swivel  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your battery when it is in the holder. The charging device connects to the O2 XDA Orbit 2 automatically when you put the O2 XDA Orbit 2 in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto ProClip Mounting Platform.

HTC Desire Passive Holder Tilt Swivel 

Stock : 1

Item No. : 511141

£ 24.71 incl. Vat
Brodit HTC Desire Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



When keeping your unit in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the unit when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Apple iPhone 4 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511170

£ 24.71 incl. Vat
Brodit Apple iPhone 4 Passive Holder Tilt Swivel   All Countries  For a more secure upright and horizontal position. Padded.

Click Image to enlarge


For a more secure upright and horizontal position. Padded.
The choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position; simply turn the holder into desired position! The holder provides a more secure upright and horizontal position than a standard holder. Safe, comfortable and convenient!

The holder has a neat and discreet design which blends well with the vehicle's interior. When keeping your iPhone in a passive holder, it is always within easy sight and reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. You can attach the cable to the back part of the holder, it will then be easy accessable whenever you want to use it.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

BlackBerry Bold 9700 Passive holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511095

£ 24.71 incl. Vat
Brodit BlackBerry Bold 9700 Passive holder  All Countries

Click Image to enlarge



When keeping your BlackBerry Bold 9700 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the BlackBerry Bold 9700 when it is in the holder.The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Brodit Accessories Mounting equipment 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 213006

£ 12.34 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.

Click Image to enlarge


MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.

Apple iPhone 5 Active holder with cig-plug. 

Stock : 2

Item No. : 521502

£ 66.54 incl. Vat
Brodit Apple iPhone 5 Active holder with cig-plug.   All Countries  With tilt swivel. With USB cable. Apple approved charging cable. Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm.

Click Image to enlarge


With tilt swivel. With USB cable. Apple approved charging cable. Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm.
Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.

Fits devices with "standard" sized skins (not rugged or slim size). Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories