Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   Samsung Galaxy Nexus   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   blackberry   tomtom 720   iPhone 7   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 9 Item(s) that match your Search
 

 Brodit ProClip for Citroen Xantia  - Console mount

Stock : 2

Item No. : 630520

£ 15.20 incl. Vat

Item No. : 630520 for Years 93-97 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Xantia. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Adjustable console mount.



A ProClip that is adjustable to suit the height of the console in a number of Citroen Xantia. In most Citroen Xantia it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Xantia  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 651996

£ 15.20 incl. Vat

Item No. : 651996 for Years 93-97 in UK

The images show the mounting position for the Brodit ProClip for your Citroen Xantia. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Xantia's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Xantia. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Xantia  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 830520

£ 15.20 incl. Vat

Item No. : 830520 for Years 93-97 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen Xantia. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Adjustable console mount.



A ProClip that is adjustable to suit the height of the console in a number of Citroen Xantia. In most Citroen Xantia it is placed on the right side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Xantia  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 851996

£ 15.20 incl. Vat

Item No. : 851996 for Years 93-97 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen Xantia. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Xantia's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Xantia. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Xantia  - Left mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 801995

£ 15.51 incl. Vat

Item No. : 801995 for Years 93-97 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen Xantia. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Xantia's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Xantia. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Citroen Xantia  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 832304

£ 15.51 incl. Vat

Item No. : 832304 for Years 93-97 in Europe

The images show the mounting position for the Brodit ProClip for your Citroen Xantia. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Citroen Xantia's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Xantia. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Eten Glofiish X500 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 971726

£ 56.25 incl. Vat
Brodit Eten Glofiish X500 Active Holder  Tilt Swivel  All Countries  With tilt swivel, with Molex adapter system. 2A charger.

Click Image to enlarge


With tilt swivel, with Molex adapter system. 2A charger.
The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions.

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

Apple iPod Mini Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 848603

£ 24.24 incl. Vat
Brodit Apple iPod Mini Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



With your iPod in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPod in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Brodit Accessories Mounting equipment 

Stock : 2

Item No. : 213005

£ 12.34 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.

Click Image to enlarge


MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.

MG F ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653423

£ 15.2 incl. Vat
Brodit MG F ProClip 96-01 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the MG F's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MG F. Made in black ABS plastic. Comes with detailed instructions.

Volvo C70 ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652412

£ 15.2 incl. Vat
Brodit Volvo C70 ProClip 97-05 UK Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Volvo C70's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo C70. Made in black ABS plastic. Comes with detailed instructions.

Renault Megane ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653056

£ 15.2 incl. Vat
Brodit Renault Megane ProClip 00-02 Australia Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Renault Megane's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Renault Megane. Made in black ABS plastic. Comes with detailed instructions.

HTC Wizard Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 848655

£ 24.24 incl. Vat
Brodit HTC Wizard Passive Holder Tilt Swivel  All Countries  For a horizontal, open position.

Click Image to enlarge


For a horizontal, open position.
With your HTC Wizard in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. This holder holds your device in a horizontal open position. There also is a holder that holds your device in an upright closed position, see item 848650. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the HTC Wizard in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the HTC Wizard when it is in the holder.

Nokia 6300 Active Holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 965131

£ 43.72 incl. Vat
Brodit Nokia 6300 Active Holder  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Land Rover Discovery ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652046

£ 15.2 incl. Vat
Brodit Land Rover Discovery ProClip 90-93 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Land Rover Discovery's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Discovery. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories