Brodit ProClip and Holders - Dedicated UK Supplier

With flexible arm. For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).

For installation of Tablet DVD and multimedia screens in Fiat Marea. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It's easy to take the screen with you when leaving the Fiat Marea. The installation is quick and will not damage the interior of the Fiat Marea.

The head rest screen mount fits a number of Fiat Marea, some of them are listed here. Are you missing a model? Measure the head rest in you Fiat Marea, if its minimum inner size is 151 mm and maximum outer size is 211 mm, this product will fit your Fiat Marea.

Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

With flexible arm. For multimedia-monitors with a vertical slot in back.

For installation of multimedia screens in Fiat Marea. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It's easy to take the screen with you when leaving the Fiat Marea. The installation is quick and will not damage the interior of the Fiat Marea.

The head rest screen mount fits a number of Fiat Marea, some of them are listed here. Are you missing a model? Measure the head rest in you Fiat Marea, if its minimum inner size is 151 mm and maximum outer size is 211 mm, this product will fit your Fiat Marea.

Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

With flexible arm. For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).

For installation of Tablet DVD and multimedia screens in Fiat Marea. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest and has a flexible arm so you can adjust the screen just the way you want. The length of the flexible arm is 27 cm. It's easy to take the screen with you when leaving the Fiat Marea. The installation is quick and will not damage the interior of the Fiat Marea.

The head rest screen mount fits a number of Fiat Marea, some of them are listed here. Are you missing a model? Measure the head rest in you Fiat Marea, if its minimum inner size is 151 mm and maximum outer size is 211 mm, this product will fit your Fiat Marea.

Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

For Apple iPad.

The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of Fiat Marea. Measure the headrest in you Fiat Marea. If the following specifications match your measurements, this product will fit your Fiat Marea:
Minimum inner distance between the headrest bars: 151 mm
Maximum outer distance between the headrest bars: 211 mm

Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

For Apple iPad.

The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of Fiat Marea. Measure the headrest in you Fiat Marea. If the following specifications match your measurements, this product will fit your Fiat Marea:
Minimum inner distance between the headrest bars: 151 mm
Maximum outer distance between the headrest bars: 211 mm

Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search