Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   icom   Samsung galaxy s8   Brodit iPhone   blackberry   hp 6915   tomtom 720  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 42 Item(s) that match your Search
 

 Brodit ProClip for Honda CR-V  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604770

£ 15.20 incl. Vat

Item No. : 604770 for Years 12-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Honda CR-V. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Honda CR-V's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda CR-V. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Honda CR-V  - Console mount

Stock : 3

Item No. : 630520

£ 15.20 incl. Vat

Item No. : 630520 for Years 97-01 in UK

The images show the mounting position for the Brodit ProClip for your Honda CR-V. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Adjustable console mount.



A ProClip that is adjustable to suit the height of the console in a number of Honda CR-V. In most Honda CR-V it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Honda CR-V  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 630530

£ 15.20 incl. Vat

Item No. : 630530 for Years 02-06 in UK

The images show the mounting position for the Brodit ProClip for your Honda CR-V. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Adjustable console mount.



A ProClip that is adjustable to suit the height of the console in a number of Honda CR-V. In most Honda CR-V it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Honda CR-V  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 630530

£ 15.20 incl. Vat

Item No. : 630530 for Years 97-02 in Australia

The images show the mounting position for the Brodit ProClip for your Honda CR-V. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Adjustable console mount.



A ProClip that is adjustable to suit the height of the console in a number of Honda CR-V. In most Honda CR-V it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Honda CR-V  - Console mount

Stock : 1

Item No. : 634771

£ 15.20 incl. Vat

Item No. : 634771 for Years 12-13 in All Countries

The images show the mounting position for the Brodit ProClip for your Honda CR-V. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Honda CR-V's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda CR-V. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Honda CR-V  - Console mount

Stock : 1

Item No. : 634771

£ 15.20 incl. Vat

Item No. : 634771 for Years 12-16 in Australia

The images show the mounting position for the Brodit ProClip for your Honda CR-V. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

ONLY for models with power outlet between seat heat buttons. NOT for models with speaker on side of console.



The ProClip is a mounting bracket for the Honda CR-V's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda CR-V. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Land Rover Freelander ProClip Right mount

Stock : 1

Item No. : 603374

£ 15.2 incl. Vat
Brodit Land Rover Freelander ProClip 98-06 All Countries Right mount

Click Image to enlarge



The ProClip is a mounting bracket for the Land Rover Freelander's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Land Rover Freelander. Made in black ABS plastic. Comes with detailed instructions.

HTC Hermes Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 968691

£ 33.95 incl. Vat
Brodit HTC Hermes Active Holder  Tilt Swivel  All Countries  With tilt swivel. For a horizontal, open position.

Click Image to enlarge


With tilt swivel. For a horizontal, open position.
The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Nokia N73 Passive holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 870120

£ 16.49 incl. Vat
Brodit Nokia N73 Passive holder  All Countries

Click Image to enlarge



When keeping your Nokia N73 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia N73 when it is in the holder. Attach onto a ProClip Mounting Platform.

Apple iPhone 3G Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875246

£ 24.71 incl. Vat
Brodit Apple iPhone 3G Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
When keeping your Apple iPhone 3G in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone 3G when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Mazda 6 ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653082

£ 15.2 incl. Vat
Brodit Mazda 6 ProClip 02-07 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mazda 6's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda 6. Made in black ABS plastic. Comes with detailed instructions.

Mazda 6 ProClip Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 634170

£ 15.2 incl. Vat
Brodit Mazda 6 ProClip 08-12 All Countries Console mount

Click Image to enlarge



The ProClip is a mounting bracket for the Mazda 6's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mazda 6. Made in black ABS plastic. Comes with detailed instructions.

HTC Touch Pro2 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511021

£ 24.71 incl. Vat
Brodit HTC Touch Pro2 Passive Holder Tilt Swivel  All Countries  NOT for models from T-HTC Touch Pro2 USA, Sprint, Verizon.

Click Image to enlarge


NOT for models from T-HTC Touch Pro2 USA, Sprint, Verizon.
With your HTC Touch Pro2 in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the HTC Touch Pro2 in the holder, and to take it out of the holder. You can also easily switch between an upright or a horizontal position, just by turning the holder.

You can connect e.g. a charging cable to the HTC Touch Pro2 when it is in the holder. Attach onto ProClip Mounting Platform.

HTC One (M8) Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511624

£ 24.71 incl. Vat
Brodit HTC One (M8) Passive holder with tilt swivel  All Countries

Click Image to enlarge



When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Apple iPhone 3G Holder with Pass-Through Connector 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 915246

£ 61.77 incl. Vat
Brodit Apple iPhone 3G Holder with Pass-Through Connector  All Countries  Padded.

Click Image to enlarge


Padded.
Holder with pass-through connector. This means that all cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPhone in the holder. (Cable not included)

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

HTC Harrier Charging Cable 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 942625

£ 15.2 incl. Vat
Brodit HTC Harrier Charging Cable  USA

Click Image to enlarge



For use in the vehicle's cigarette lighter socket, charges your HTC Harrier. Can be connected to the HTC Harrier when it is in a passive holder.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories