Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
nokia   apple   htc   audi   bmw   motorola   ipod   tomtom   fiat   blackberry   hp 6915   i   ford   audi a3   942044   htc touch   iphone 4   ford mondeo   xc60   iPad   iPhone 3g   galaxy s 1900   diamond   icom   i href  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Browse Accessories by

Brand

Category

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 5 Item(s) that match your Search
 

 Brodit ProClip for Lincoln Aviator  - Center mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 853218

£ 15.99 incl. Vat

Item No. : 853218 for Years 03-09 in USA

The images show the mounting position for the Brodit ProClip for your Lincoln Aviator. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Lincoln Aviator's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Lincoln Aviator. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Lincoln Aviator  - Angled mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 853219

£ 15.99 incl. Vat

Item No. : 853219 for Years 03-09 in USA

The images show the mounting position for the Brodit ProClip for your Lincoln Aviator. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Lincoln Aviator's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Lincoln Aviator. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Lincoln Aviator  - Headrest mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 810721

£ 37.99 incl. Vat

Item No. : 810721 for Years 03-09 in USA

The images show the mounting position for the Brodit Headrest mount for your Lincoln Aviator. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.



The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Lincoln Aviator, some of them are listed below. Are you missing a model? Measure the headrest in your Lincoln Aviator, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

 

 Brodit ProClip for Lincoln Aviator  - Headrest mount

Stock : 2

Item No. : 811020

£ 37.99 incl. Vat

Item No. : 811020 for Years 03-09 in USA

The images show the mounting position for the Brodit Headrest mount for your Lincoln Aviator. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.



Note! Two-part solution.

Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).

The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.

Is your car missing?
This headrest mount fits a number of Lincoln Aviator, some of them are listed below. Are you missing a model? Measure the headrest in your Lincoln Aviator, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.


Full Brodit Proclip Search 

 

 Brodit ProClip for Lincoln Aviator  - Headrest mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 810820

£ 39.98 incl. Vat

Item No. : 810820 for Years 03-09 in USA

The images show the mounting position for the Brodit Headrest mount for your Lincoln Aviator. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

For multimedia-monitors with a vertical slot in back.



For installation of multimedia screens in Lincoln Aviator. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Lincoln Aviator. The installation is quick and will not damage the interior of the Lincoln Aviator.

The head rest screen mount fits a number of Lincoln Aviator, some of them are listed here. Are you missing a model? Measure the head rest in you Lincoln Aviator, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Lincoln Aviator.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

Customers Also Viewed

Nextbase SDV185S (8-5inch) Headrest mount 

Stock : 1 - 3 [ call to confirm ]

Item No. : 810920

£ 39.98 incl. Vat
Brodit Nextbase SDV185S (8-5inch) Headrest mount  All Countries  For multimedia-monitors with a hole underneath for thumb screw attachment (

Click Image to enlarge


For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.

BMW 318-330-E90-E91-E92 Headrest mount Headrest mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 810810

£ 39.98 incl. Vat
Brodit BMW 318-330-E90-E91-E92 Headrest mount 05-10 All Countries Headrest mount For multimedia-monitors with a vertical slot in back.

Click Image to enlarge


For multimedia-monitors with a vertical slot in back.
For installation of multimedia monitors in BMW 318-330-E90-E91-E92. Fits monitors with a vertical slot on the back side. The monitor mount is placed onto a front seat's headrest. It comes with a tilt swivel so the monitor can be adjusted in order to avoid reflection. It's easy to take the monitor with you when leaving the BMW 318-330-E90-E91-E92. The installation is quick and will not damage the interior of the BMW 318-330-E90-E91-E92.

The headrest monitor mount fits a number of BMW 318-330-E90-E91-E92, some of them are listed here. Are you missing a model? Measure the headrest in you BMW 318-330-E90-E91-E92, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your BMW 318-330-E90-E91-E92.

Brodit Accessories Mounting equipment 

Stock : 2

Item No. : 213006

£ 10.99 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.

Click Image to enlarge


MoveClip Big 2 female + 1 male, 4 screws. 60 x 50 x 5 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.

BMW 520-545-M5 E60- E61 Monitor mount Between seats mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 823056

£ 35.99 incl. Vat
Brodit BMW 520-545-M5 E60- E61 Monitor mount 04-10 All Countries Between seats mount Mount for monitors with a vertical slot in back.

Click Image to enlarge


Mount for monitors with a vertical slot in back.
For installation of multimedia screens in BMW 520-545-M5 E60- E61. The screen mount is placed between the front seats, giving the back seat passengers a perfect view. The screen mount comes with a tilt swivel so it can be adjusted in order to avoid light reflection. You can take the screen with you when leaving the BMW 520-545-M5 E60- E61. Installation is quick and easy. The interior of the BMW 520-545-M5 E60- E61 will not be damaged, as no drilling holes is required.

The screen mount fits screens with a vertical slot on the back side.

Honda Civic ProClip Center mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 853732

£ 15.99 incl. Vat
Brodit Honda Civic ProClip 06-11 Europe Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Honda Civic's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Civic. Made in black ABS plastic. Comes with detailed instructions.

Apple iPad 2 Holder for Cable Attachment 

Stock : 1 - 3 [ call to confirm ]

Item No. : 515244

£ 34.99 incl. Vat
Brodit Apple iPad 2 Holder for Cable Attachment   All Countries  For Apple Composite AV Cable. With tilt swivel.

Click Image to enlarge


For Apple Composite AV Cable. With tilt swivel.
Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included)

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad 2 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

Apple iPhone 4 Passive Holder Tilt Swivel 

Stock : 6

Item No. : 511165

£ 24.99 incl. Vat
Brodit Apple iPhone 4 Passive Holder Tilt Swivel  All Countries  Adjustable holder. Fits devices with skin (NOT for Apple original Bumper).

Click Image to enlarge


Adjustable holder. Fits devices with skin (NOT for Apple original Bumper).
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

HTC Desire S Active holder with cig-plug. 

Stock : 1 - 3 [ call to confirm ]

Item No. : 512251

£ 34.99 incl. Vat
Brodit HTC Desire S Active holder with cig-plug.   All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Apple iPad 2 Passive holder with tilt swivel 

Stock : 5

Item No. : 511244

£ 29.99 incl. Vat
Brodit Apple iPad 2 Passive holder with tilt swivel   All Countries

Click Image to enlarge



With your iPad 2 in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad 2 when it is in the holder.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad 2 into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad 2 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

Apple iPad 2 Active holder with cig-plug. 

Stock : 1 - 3 [ call to confirm ]

Item No. : 521244

£ 63.99 incl. Vat
Brodit Apple iPad 2 Active holder with cig-plug.   All Countries  With tilt swivel. With USB cable. Apple approved charging cable.

Click Image to enlarge


With tilt swivel. With USB cable. Apple approved charging cable.
Use an active holder for your iPad 2 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable which you can connect directly to the USB interface in your vehicle.

The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad 2 into place in the holder, and to take it with you when leaving the car.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad 2 phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories