Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   Samsung Galaxy Nexus   fiat   sun visor   audi a3   Samsung Galaxy S8   942044   ford mondeo   Samsung galaxy s8   xc60   iphone 4   iPad   blackberry   Brodit iPhone   icom   hp 6915   tomtom 720  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 6 Item(s) that match your Search
 

 Brodit ProClip for MAN TGX  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604286

£ 15.20 incl. Vat

Item No. : 604286 for Years 08-16 in UK

The images show the mounting position for the Brodit ProClip for your MAN TGX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the MAN TGX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TGX. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for MAN TGX  - Center mount

Stock : 7

Item No. : 654285

£ 15.20 incl. Vat

Item No. : 654285 for Years 08-16 in UK

The images show the mounting position for the Brodit ProClip for your MAN TGX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the MAN TGX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TGX. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for MAN TGX  - Left mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 804286

£ 15.20 incl. Vat

Item No. : 804286 for Years 08-16 in Europe

The images show the mounting position for the Brodit ProClip for your MAN TGX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the MAN TGX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TGX. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for MAN TGX  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854285

£ 15.20 incl. Vat

Item No. : 854285 for Years 08-16 in Europe

The images show the mounting position for the Brodit ProClip for your MAN TGX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the MAN TGX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the MAN TGX. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for MAN TGX  - Extra strength mounting platform.

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 213457

£ 38.01 incl. Vat

Item No. : 213457 for Years 08-16 in Europe

The images show the mounting position for the Brodit ProClip for your MAN TGX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


Full Brodit Proclip Search 

 

 Brodit ProClip for MAN TGX  - Extra strength mounting platform.

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 313457

£ 38.01 incl. Vat

Item No. : 313457 for Years 08-16 in UK

The images show the mounting position for the Brodit Mounting bracket for your MAN TGX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick and easy and will not damage the interior. Detailed installation instructions included.


Full Brodit Proclip Search 

Customers Also Viewed

Samsung Galaxy S i9000 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512167

£ 43.72 incl. Vat
Brodit Samsung Galaxy S i9000 Active Holder  Tilt Swivel   All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
Keep your device in an active holder while on the road, and you will always have a freshly charged battery! With cigarette lighter cable, 12/24 Volt.

The holder is equipped with a tilt swivel, this means that you can adjust the angle of your device for easier viewing and avoiding light reflection. Attach onto the ProClip Mounting Platform.

Citroen Berlingo Transport ProClip Right mount

Stock : 3

Item No. : 604211

£ 15.2 incl. Vat
Brodit Citroen Berlingo Transport ProClip 08-16 All Countries Right mount

Click Image to enlarge



The ProClip is a mounting bracket for the Citroen Berlingo Transport's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Citroen Berlingo Transport. Made in black ABS plastic. Comes with detailed instructions.

Apple iPhone 3G Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875246

£ 24.71 incl. Vat
Brodit Apple iPhone 3G Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
When keeping your Apple iPhone 3G in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone 3G when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Nokia 6700 Classic Holder for Cable Attachment 

Stock : 4

Item No. : 515037

£ 32.3 incl. Vat
Brodit Nokia 6700 Classic Holder for Cable Attachment   All Countries  For Nokia original cable CA-116, CA-113CU and CA-134.

Click Image to enlarge


For Nokia original cable CA-116, CA-113CU and CA-134.
Holder for cable plug attachment. To be used with Nokia original cable CA-116 (included in CK-7W), CA-113CU (included in CK-300), or CA-134 (included in CK-100 and CK-600). The cable is easy to attach to the holder. The phone has got the connector for charging on the bottom of the device. The holder offer a firm fit, it is easy to put the phone in the holder and then connect the cable to it. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

TomTom GO 520 T Mount with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215267

£ 22.8 incl. Vat
Brodit TomTom GO 520 T Mount with tilt swivel  All Countries

Click Image to enlarge



The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

ATandT Samsung Galaxy S III (SGH-i747) Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 521398

£ 54.17 incl. Vat
Brodit ATandT Samsung Galaxy S III (SGH-i747) Active holder with cig-plug.   USA  With tilt swivel. With USB cable.

Click Image to enlarge


With tilt swivel. With USB cable.
The active holder charges your Galaxy S III when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

Samsung Galaxy Ace Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511243

£ 24.71 incl. Vat
Brodit Samsung Galaxy Ace Passive holder with tilt swivel   All Countries

Click Image to enlarge



Keep your Samsung in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the Samsung when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle..

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

Apple iPad Mini Retina Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511584

£ 36.11 incl. Vat
Brodit Apple iPad Mini Retina Passive holder with tilt swivel  All Countries

Click Image to enlarge



With your iPad Mini Retina in a holder attached in the car you will always have it within easy reach. Safe, neat and convenient! You can connect e.g. a charging cable to the iPad when it is in the holder.   
 
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

Jaguar X-Type ProClip Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 632933

£ 15.2 incl. Vat
Brodit Jaguar X-Type ProClip 01-10 All Countries Console mount

Click Image to enlarge



The ProClip is a mounting bracket for the Jaguar X-Type's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Jaguar X-Type. Made in black ABS plastic. Comes with detailed instructions.

Samsung Galaxy S III Mini GT-i8190 Active holder for fixed installation. 

Stock : 1

Item No. : 513466

£ 61.77 incl. Vat
Brodit Samsung Galaxy S III Mini GT-i8190 Active holder for fixed installation.   All Countries  With tilt swivel, with Molex adapter system. 2A charger.

Click Image to enlarge


With tilt swivel, with Molex adapter system. 2A charger.
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!
 
You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
 
12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended.
 
The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.
 
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories