Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   Samsung Galaxy Nexus   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   blackberry   tomtom 720   iPhone 7   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 10 Item(s) that match your Search
 

 Brodit ProClip for Mitsubishi ASX  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654528

£ 15.20 incl. Vat

Item No. : 654528 for Years 10-14 in All Countries

The images show the mounting position for the Brodit ProClip for your Mitsubishi ASX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Mitsubishi ASX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mitsubishi ASX. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Mitsubishi ASX  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 655081

£ 15.20 incl. Vat

Item No. : 655081 for Years 15-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Mitsubishi ASX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Mitsubishi ASX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mitsubishi ASX. Made in black ABS plastic. Comes with detailed instructions.


Full Brodit Proclip Search 

 

 Brodit ProClip for Mitsubishi ASX  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854528

£ 15.20 incl. Vat

Item No. : 854528 for Years 10-14 in All Countries

The images show the mounting position for the Brodit ProClip for your Mitsubishi ASX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Mitsubishi ASX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mitsubishi ASX. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Mitsubishi ASX  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 855081

£ 15.20 incl. Vat

Item No. : 855081 for Years 15-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Mitsubishi ASX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Mitsubishi ASX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mitsubishi ASX. Made in black ABS plastic. Comes with detailed instructions.


Full Brodit Proclip Search 

 

 Brodit ProClip for Mitsubishi ASX  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604529

£ 15.51 incl. Vat

Item No. : 604529 for Years 10-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Mitsubishi ASX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Mitsubishi ASX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mitsubishi ASX. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Mitsubishi ASX  - Left mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 804529

£ 15.51 incl. Vat

Item No. : 804529 for Years 10-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Mitsubishi ASX. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Mitsubishi ASX's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Mitsubishi ASX. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Apple iPhone Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875214

£ 24.71 incl. Vat
Brodit Apple iPhone Passive Holder Tilt Swivel  All Countries  Adjustable holder, fits devices with skins.

Click Image to enlarge


Adjustable holder, fits devices with skins.
With your iPhone in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPhone in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Sony Ericsson K800i Passive Holder Tilt Swivel 

Stock : 1

Item No. : 875095

£ 24.71 incl. Vat
Brodit Sony Ericsson K800i Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



When keeping your Sony Ericsson K800i in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Sony Ericsson K800i when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

TomTom GO 520 T Mount with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215267

£ 22.8 incl. Vat
Brodit TomTom GO 520 T Mount with tilt swivel  All Countries

Click Image to enlarge



The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

HTC Desire S Active holder for fixed installation. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 513251

£ 61.77 incl. Vat
Brodit HTC Desire S Active holder for fixed installation.   All Countries  With tilt swivel, with Molex adapter system. 2A charger.

Click Image to enlarge


With tilt swivel, with Molex adapter system. 2A charger.
An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!

You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).

12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

Parrot 3200 LS-COLOR Mount with tilt swivel 

Stock : 2

Item No. : 215130

£ 22.8 incl. Vat
Brodit Parrot 3200 LS-COLOR Mount with tilt swivel  All Countries

Click Image to enlarge



Apple iPhone 4 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511164

£ 24.71 incl. Vat
Brodit Apple iPhone 4 Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

BlackBerry Bold 9900 Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512271

£ 43.72 incl. Vat
Brodit BlackBerry Bold 9900 Active holder with cig-plug.   All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your BlackBerry when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Samsung Galaxy S4 GT-I9505 Passive holder with tilt swivel 

Stock : 2

Item No. : 511526

£ 24.71 incl. Vat
Brodit Samsung Galaxy S4 GT-I9505 Passive holder with tilt swivel  All Countries

Click Image to enlarge



When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

TomTom GO 500 New version Active Dock Holder with Tilt Swivel 

Stock : 2

Item No. : 215684

£ 76.04 incl. Vat
Brodit TomTom GO 500 New version Active Dock Holder with Tilt Swivel   All Countries  With straight cable for fixed installation.

Click Image to enlarge


With straight cable for fixed installation.
Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach a charging cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. The enclosed cable can not be used for TMC.

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

TomTom GO LIVE 800 Series Mounting Accessories 

Stock : 5

Item No. : 215567

£ 24.71 incl. Vat
Brodit TomTom GO LIVE 800 Series Mounting Accessories  All Countries  Tilt swivel mount.

Click Image to enlarge


Tilt swivel mount.
The choice for you who prefer to have your GPS device within easy sight and reach attached onto the dashboard instead of in the windshield. The product consists of a tilt swivel mount and a MultiMoveClip that replaces the original mount.

You can easily take you device with you when leaving the car. A charging cable can be connected to the device when it is in place in the mount. You can adjust the angle of the device in order to avoid light reflection. Attach the mount onto a ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories