Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   Samsung Galaxy Nexus   fiat   sun visor   audi a3   Samsung Galaxy S8   942044   ford mondeo   Samsung galaxy s8   xc60   iphone 4   iPad   blackberry   Brodit iPhone   icom   hp 6915   tomtom 720  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 6 Item(s) that match your Search
 

 Brodit ProClip for Skoda Citigo  - Right mount

Stock : 5

Item No. : 604997

£ 15.20 incl. Vat

Item No. : 604997 for Years 12-16 in UK

The images show the mounting position for the Brodit ProClip for your Skoda Citigo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Skoda Citigo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Citigo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Citigo  - Angled mount

Stock : 6

Item No. : 654737

£ 15.20 incl. Vat

Item No. : 654737 for Years 12-14 in UK

The images show the mounting position for the Brodit ProClip for your Skoda Citigo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

NOT for Seat Mii Entry. NOT for Skoda Citigo Active and Arctic. NOT for Volkswagen UP Take Up.



The ProClip is a mounting bracket for the Skoda Citigo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Citigo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Citigo  - Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 655132

£ 15.20 incl. Vat

Item No. : 655132 for Years 15-16 in UK

The images show the mounting position for the Brodit ProClip for your Skoda Citigo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket that you attach onto the Skoda Citigo's dashboard. It provides a mounting platform for mobile phones and other devices that you want to have within easy sight and reach in the car. Safe, neat and convenient! The ProClip has a perfect fit, it is custom made for each Skoda Citigo to ensure a secure base for installations.

The ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed installation instructions. The mounting plate is equipped with predrilled holes which make the installation of equipment on the ProClip easier. The holes suit all Brodit holders and other products with standard holes, the hole pattern constists of one set of AMPS-holes as well as two sets of double-holes placed in different height.

View demo video


Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Citigo  - Angled mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854737

£ 15.20 incl. Vat

Item No. : 854737 for Years 12-14 in Europe

The images show the mounting position for the Brodit ProClip for your Skoda Citigo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

NOT for Seat Mii Entry. NOT for Skoda Citigo Active and Arctic. NOT for Volkswagen UP Take Up.



The ProClip is a mounting bracket for the Skoda Citigo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Citigo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Citigo  - Left mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 804997

£ 15.50 incl. Vat

Item No. : 804997 for Years 12-16 in Europe

The images show the mounting position for the Brodit ProClip for your Skoda Citigo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Skoda Citigo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Citigo. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Citigo  - Angled mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 855132

£ 15.50 incl. Vat

Item No. : 855132 for Years 15-16 in Europe

The images show the mounting position for the Brodit ProClip for your Skoda Citigo. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket that you attach onto the Skoda Citigo's dashboard. It provides a mounting platform for mobile phones and other devices that you want to have within easy sight and reach in the car. Safe, neat and convenient! The ProClip has a perfect fit, it is custom made for each Skoda Citigo to ensure a secure base for installations.

The ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed installation instructions. The mounting plate is equipped with predrilled holes which make the installation of equipment on the ProClip easier. The holes suit all Brodit holders and other products with standard holes, the hole pattern constists of one set of AMPS-holes as well as two sets of double-holes placed in different height.

View demo video


Full Brodit Proclip Search 

Customers Also Viewed

Audi A1 ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654610

£ 15.2 incl. Vat
Brodit Audi A1 ProClip 11-11 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Audi A1's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A1. Made in black ABS plastic. Comes with detailed instructions.

Apple iPhone 4 Holder for Cable Attachment 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 514164

£ 38.01 incl. Vat
Brodit Apple iPhone 4 Holder for Cable Attachment   All Countries  For Griffin PowerJolt cable. Padded.

Click Image to enlarge


For Griffin PowerJolt cable. Padded.
The choice for you who often connect an Griffin PowerJolt cable to your iPhone. You attach the Griffin-cable to the holder easily. It then connects automatically to the iPhone when you put it in the holder, so you do not have to connect the cable it manually each time.

The holder fits only for the new Griffin PowerJolt cable with release buttons on the sides. Compare the connector in the picture with the connector on your cable in order to find the correct holder. (Cable not included)

Keep your iPhone in a holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Samsung Galaxy S II i9100 Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511258

£ 28.51 incl. Vat
Brodit Samsung Galaxy S II i9100 Passive holder with tilt swivel  All Countries  Adjustable Holder, Fits Devices with Skin.

Click Image to enlarge


Adjustable Holder, Fits Devices with Skin.
Keep your Galaxy S II in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your Galaxy S II is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for Galaxy S II with skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Also fits with Samsung 2000mAh thicker battery. Attach onto ProClip Mounting Platform.

Motorola Atrix Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512241

£ 43.72 incl. Vat
Brodit Motorola Atrix Active holder with cig-plug.   All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Attach onto a ProClip Mounting Platform.

Apple iPhone 4 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511164

£ 24.71 incl. Vat
Brodit Apple iPhone 4 Passive Holder Tilt Swivel  All Countries  Padded.

Click Image to enlarge


Padded.
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Apple iPhone 5 Holder for Cable Attachment 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 514437

£ 40.87 incl. Vat
Brodit Apple iPhone 5 Holder for Cable Attachment   All Countries  Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. <span class = 'lightning' >For use with Apple original Lightning to USB Cable.</span>

Click Image to enlarge


Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. For use with Apple original Lightning to USB Cable.
This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB Cable (Apple article. no. MD818ZM/A. You can charge you iPhone by connecting it to the car's USB socket, or use it with a USB/cig-plug adapter for the car's 12V socket.

In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder. Fits devices with "rugged" sized skins (not standard or slim size). Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Apple iPhone 4 Passive Holder Tilt Swivel 

Stock : 1

Item No. : 511165

£ 24.71 incl. Vat
Brodit Apple iPhone 4 Passive Holder Tilt Swivel  All Countries  Adjustable holder. Fits devices with skin (NOT for Apple original Bumper).

Click Image to enlarge


Adjustable holder. Fits devices with skin (NOT for Apple original Bumper).
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

HTC One Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 521525

£ 76.04 incl. Vat
Brodit HTC One Active holder with cig-plug.  All Countries  With tilt swivel. Fits devices with skin.

Click Image to enlarge


With tilt swivel. Fits devices with skin.
The active holder charges your HTC One when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Passar enhet med skin. Attach onto a ProClip Mounting Platform.

Apple iPhone 5 Passive holder with tilt swivel 

Stock : 4

Item No. : 511431

£ 28.51 incl. Vat
Brodit Apple iPhone 5 Passive holder with tilt swivel   All Countries  Adjustable holder. Fits devices with skin that has the following dimensions: Width: 59-63 mm, Thickness: 6-10 mm.

Click Image to enlarge


Adjustable holder. Fits devices with skin that has the following dimensions: Width: 59-63 mm, Thickness: 6-10 mm.
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.

In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.

Fits devices with slim sized skins (not "standard" or rugged size). Fits devices with skin that has the following dimensions: Width: 59-63 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Ford Focus ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 653585

£ 15.2 incl. Vat
Brodit Ford Focus ProClip 05-10 UK Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Focus's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Focus. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories