Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   i e href   Samsung galaxy s8   icom   Brodit iPhone   blackberry   i h  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 14 Item(s) that match your Search
 

 Brodit ProClip for Skoda Rapid  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654901

£ 15.20 incl. Vat

Item No. : 654901 for Years 13-15 in UK

The images show the mounting position for the Brodit ProClip for your Skoda Rapid. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Skoda Rapid's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Rapid. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Rapid  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 655195

£ 15.20 incl. Vat

Item No. : 655195 for Years 16-16 in UK

The images show the mounting position for the Brodit ProClip for your Skoda Rapid. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket that you attach onto the Skoda Rapid's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!

The ProClip has a perfect fit, it is custom made for each Skoda Rapid to ensure a secure base for installations. And the ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.

View demo video†


Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Rapid  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854901

£ 15.20 incl. Vat

Item No. : 854901 for Years 13-15 in Europe

The images show the mounting position for the Brodit ProClip for your Skoda Rapid. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Skoda Rapid's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Rapid. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Rapid  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 855195

£ 15.50 incl. Vat

Item No. : 855195 for Years 16-16 in Europe

The images show the mounting position for the Brodit ProClip for your Skoda Rapid. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket that you attach onto the Skoda Rapid's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!

The ProClip has a perfect fit, it is custom made for each Skoda Rapid to ensure a secure base for installations. And the ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.

View demo video†


Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Rapid  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 655356

£ 15.98 incl. Vat

Item No. : 655356 for Years -1 in UK

The images show the mounting position for the Brodit ProClip for your Skoda Rapid. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



Keep your device within easy sight and reach in your car! The ProClip makes it easier and safer to use handheld devices in vehicles. The ProClip is a mounting bracket that you attach to the dashboard of your car. Onto the ProClip, you can install any accessory, e.g. a holder for mobile phone or other communication device.

The ProClip is car specific, it is customized for each car model and has a perfect fit. The ProClip offers a firm mounting platform and is available in multiple positions for most vehicles. Discreet design that blends in well with the interior. Safe, neat and convenient!

The ProClip is easy to install, you can do it in a minute! You simply snap the ProClip into place in gaps in the interior, you do not need to drill holes or use special tools or dismantle the dashboard. Detailed mounting instructions included. The ProClip has predrilled AMPS holes for easy installation of a holder. Made of high grade ABS/Acetal plastic. Color: Black. Developed and produced in Sweden.

- Do you want to be able to switch between several holders on the same ProClip? Please see Broditís MultiMoveClip.
- Are you installing larger devices or heavier equipment? Please see Broditís Extra Strength Mounting Platforms and Pedestal Mounts.


Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Rapid  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 855356

£ 15.98 incl. Vat

Item No. : 855356 for Years -1 in Europe

The images show the mounting position for the Brodit ProClip for your Skoda Rapid. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



Keep your device within easy sight and reach in your car! The ProClip makes it easier and safer to use handheld devices in vehicles. The ProClip is a mounting bracket that you attach to the dashboard of your car. Onto the ProClip, you can install any accessory, e.g. a holder for mobile phone or other communication device.

The ProClip is car specific, it is customized for each car model and has a perfect fit. The ProClip offers a firm mounting platform and is available in multiple positions for most vehicles. Discreet design that blends in well with the interior. Safe, neat and convenient!

The ProClip is easy to install, you can do it in a minute! You simply snap the ProClip into place in gaps in the interior, you do not need to drill holes or use special tools or dismantle the dashboard. Detailed mounting instructions included. The ProClip has predrilled AMPS holes for easy installation of a holder. Made of high grade ABS/Acetal plastic. Color: Black. Developed and produced in Sweden.

- Do you want to be able to switch between several holders on the same ProClip? Please see Broditís MultiMoveClip.
- Are you installing larger devices or heavier equipment? Please see Broditís Extra Strength Mounting Platforms and Pedestal Mounts.


Full Brodit Proclip Search 

Customers Also Viewed

Samsung Galaxy S II i9100 Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511258

£ 28.51 incl. Vat
Brodit Samsung Galaxy S II i9100 Passive holder with tilt swivel  All Countries  Adjustable Holder, Fits Devices with Skin.

Click Image to enlarge


Adjustable Holder, Fits Devices with Skin.
Keep your Galaxy S II in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your Galaxy S II is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for Galaxy S II with skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22į in each direction. Also fits with Samsung 2000mAh thicker battery. Attach onto ProClip Mounting Platform.

HTC One Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512524

£ 43.72 incl. Vat
Brodit HTC One Active holder with cig-plug.  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your smartphone when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

TomTom XXL Holder with Pass-Through Connector 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 516039

£ 47.52 incl. Vat
Brodit TomTom XXL Holder with Pass-Through Connector  All Countries  Passive holder with tilt swivel.

Click Image to enlarge


Passive holder with tilt swivel.
The choice for you who often connect a miniUSB-cable to our GPS device, and want to have it neatly and securely mounted in the car. With your GPS in a holder, you will always have your GPS within easy sight and reach!

The holder is equipped with a pass-through connector, so all miniUSB-cables that can be used with the GPS device can also be used with the holder (e.g. a charging or TMC cable). When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder.

The holder is placed on the dashboard, providing you with an unobstructed view. You can easily take your GPS with you when leaving the car. The holder is equipped with a tilt swivel, this means it is easy to adjust the angle as needed. Attach onto ProClip Mounting Platform.

Nokia N8 Passive Holder with Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511205

£ 24.71 incl. Vat
Brodit Nokia N8 Passive Holder with Tilt Swivel   All Countries

Click Image to enlarge



When keeping your device in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Apple iPhone 5 Passive holder with tilt swivel 

Stock : 5

Item No. : 511422

£ 24.71 incl. Vat
Brodit Apple iPhone 5 Passive holder with tilt swivel  All Countries  Padded.

Click Image to enlarge


Padded.
Keep your iPhone 5 in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone 5 is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 5 without skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22į in each direction. Attach onto ProClip Mounting Platform.

Samsung Galaxy S6 Active holder with cig-plug 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 521724

£ 85.55 incl. Vat
Brodit Samsung Galaxy S6 Active holder with cig-plug  All Countries  With tilt swivel. With USB cable. Fits for devices with skin; adjustable top.

Click Image to enlarge


With tilt swivel. With USB cable. Fits for devices with skin; adjustable top.
The active holder charges your phone when it is in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12 Volt. Fits for devices with skin. The top part of the holder is adjustable and adapts to the height of your phone. Attach onto a ProClip Mounting Platform.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

Apple iPhone 6 Passive holder with tilt swivel 

Stock : 6

Item No. : 511666

£ 28.51 incl. Vat
Brodit Apple iPhone 6 Passive holder with tilt swivel  All Countries  Adjustable holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm.

Click Image to enlarge


Adjustable holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm.
Keep your iPhone 6 in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone 6 is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone 6 while placed in the holder.

To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone 6 in the holder.

Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Sony Xperia Z5 Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511811

£ 24.71 incl. Vat
Brodit Sony Xperia Z5 Passive holder with tilt swivel  All Countries

Click Image to enlarge



When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories