Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   i e href   Samsung galaxy s8   icom   Brodit iPhone   blackberry   i h  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 10 Item(s) that match your Search
 

 Brodit ProClip for Skoda Yeti  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604395

£ 15.20 incl. Vat

Item No. : 604395 for Years 10-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Skoda Yeti. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Skoda Yeti's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Yeti  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654393

£ 15.20 incl. Vat

Item No. : 654393 for Years 10-15 in All Countries

The images show the mounting position for the Brodit ProClip for your Skoda Yeti. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Skoda Yeti's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Yeti  - Angled mount

Stock : 1

Item No. : 654394

£ 15.20 incl. Vat

Item No. : 654394 for Years 10-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Skoda Yeti. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

ONLY for models with original stereo Swing and Blues.



The ProClip is a mounting bracket for the Skoda Yeti's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Yeti  - Angled mount

Stock : 3

Item No. : 654587

£ 15.20 incl. Vat

Item No. : 654587 for Years 10-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Skoda Yeti. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

ONLY for models with Amundsen stereo.



The ProClip is a mounting bracket for the Skoda Yeti's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Yeti  - Center mount

Stock : 1

Item No. : 655216

£ 15.20 incl. Vat

Item No. : 655216 for Years 16-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Skoda Yeti. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Skoda Yeti's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


Full Brodit Proclip Search 

 

 Brodit ProClip for Skoda Yeti  - Left mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 804395

£ 15.20 incl. Vat

Item No. : 804395 for Years 10-16 in Europe

The images show the mounting position for the Brodit ProClip for your Skoda Yeti. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Skoda Yeti's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Skoda Yeti. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Apple iPhone 3G Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 527023

£ 61.77 incl. Vat
Brodit Apple iPhone 3G Active Holder  Tilt Swivel   All Countries  With tilt swivel. 2A charger. For a more secure upright and horizontal position. Padded. Apple approved charging cable.

Click Image to enlarge


With tilt swivel. 2A charger. For a more secure upright and horizontal position. Padded. Apple approved charging cable.
The choice for you who want to have your device within easy reach, attached by the dashboard instead of on the windshield mount, giving you clear sight. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen.

Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12 Volt.

When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder.

Attach onto ProClip Mounting Platform.

Apple iPod Nano Device Mounting Adapter 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215169

£ 15.2 incl. Vat
Brodit Apple iPod Nano Device Mounting Adapter  All Countries  Fits with holders 840640, 840651, 840653, 840677, 840687, 840688 and 840689.

Click Image to enlarge


Fits with holders 840640, 840651, 840653, 840677, 840687, 840688 and 840689.
With the Nano adapter you can use the same holder for your Nano as well as for your full-size iPod! You simply put the adapter in the holder when you want to use it for a Nano, and take it out when you want to use it for a full-size iPod.

Nokia E71 Passive holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 870242

£ 15.2 incl. Vat
Brodit Nokia E71 Passive holder  All Countries

Click Image to enlarge



When keeping your Nokia E71 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia E71 when it is in the holder. Accommodates all battery sizes. Attach onto a ProClip Mounting Platform.

Nokia 5800 Passive holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 870288

£ 16.49 incl. Vat
Brodit Nokia 5800 Passive holder  All Countries

Click Image to enlarge



When keeping your Nokia 5800 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 5800 when it is in the holder. Accommodates all battery sizes. Attach onto a ProClip Mounting Platform.

Garmin Nuvi 200 Mounting Accessories 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215116

£ 17.45 incl. Vat
Brodit Garmin Nuvi 200 Mounting Accessories  All Countries  Tilt swivel mount.

Click Image to enlarge


Tilt swivel mount.
Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.

With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.

TomTom GO 520 T Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 273006

£ 43.72 incl. Vat
Brodit TomTom GO 520 T Active Holder  Tilt Swivel  All Countries  With tilt swivel. With TMC connectivity (round plug).

Click Image to enlarge


With tilt swivel. With TMC connectivity (round plug).
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt. Fits devices with a TMC module with a round plug. (TMC module not included).

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Apple iPhone 4 Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 521164

£ 54.17 incl. Vat
Brodit Apple iPhone 4 Active Holder  Tilt Swivel  All Countries  With tilt swivel. With USB cable. Apple approved charging cable. Padded.

Click Image to enlarge


With tilt swivel. With USB cable. Apple approved charging cable. Padded.
Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Apple iPad Headrest mount 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215447

£ 67.89 incl. Vat
Brodit Apple iPad Headrest mount  All Countries

Click Image to enlarge



The choice for you who use your iPad in the back seat of a car. The iPad mount is placed onto a front seat's headrest. The installation is quick and easy, no special tools are required and the interior will not be damaged. You can connect e.g. a charging cable to the iPad when it is in the holder.

The mount is equipped with a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the iPad into place in the holder, and to take it with you when leaving the car.

The headrest mount fits a number of vehicles. Measure the headrest in you vehicle. If the following specifications match your measurements, this product will fit your vehicle:
Minimum inner distance between the headrest bars: 95 mm
Maximum outer distance between the headrest bars: 211 mm

Navigon 8110 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 272021

£ 24.71 incl. Vat
Brodit Navigon 8110 Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving the vehicle. The holders can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Apple iPhone Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875214

£ 24.71 incl. Vat
Brodit Apple iPhone Passive Holder Tilt Swivel  All Countries  Adjustable holder, fits devices with skins.

Click Image to enlarge


Adjustable holder, fits devices with skins.
With your iPhone in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPhone in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories