Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   Samsung Galaxy Nexus   fiat   sun visor   audi a3   Samsung Galaxy S8   942044   ford mondeo   Samsung galaxy s8   xc60   iphone 4   iPad   blackberry   Brodit iPhone   icom   hp 6915   tomtom 720  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 38 Item(s) that match your Search
 

 Brodit ProClip for Toyota HiLux  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604811

£ 15.20 incl. Vat

Item No. : 604811 for Years 12-15 in Australia

The images show the mounting position for the Brodit ProClip for your Toyota HiLux. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Toyota HiLux's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota HiLux. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota HiLux  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604811

£ 15.20 incl. Vat

Item No. : 604811 for Years 12-16 in UK

The images show the mounting position for the Brodit ProClip for your Toyota HiLux. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Toyota HiLux's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota HiLux. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota HiLux  - Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604811

£ 15.20 incl. Vat

Item No. : 604811 for Years 12-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Toyota HiLux. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Toyota HiLux's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota HiLux. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota HiLux  - Console mount

Stock : 7

Item No. : 632596

£ 15.20 incl. Vat

Item No. : 632596 for Years 98-05 in All Countries

The images show the mounting position for the Brodit ProClip for your Toyota HiLux. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

ONLY for X-Cab.



The ProClip is a mounting bracket for the Toyota HiLux's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota HiLux. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota HiLux  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652482

£ 15.20 incl. Vat

Item No. : 652482 for Years 89-97 in All Countries

The images show the mounting position for the Brodit ProClip for your Toyota HiLux. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Toyota HiLux's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota HiLux. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Toyota HiLux  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652594

£ 15.20 incl. Vat

Item No. : 652594 for Years 98-05 in All Countries

The images show the mounting position for the Brodit ProClip for your Toyota HiLux. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Toyota HiLux's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota HiLux. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

Nokia 6300 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875131

£ 24.71 incl. Vat
Brodit Nokia 6300 Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



When keeping your Nokia 6300 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 6300 when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Garmin Nuvi 200 Mounting Accessories 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215116

£ 17.45 incl. Vat
Brodit Garmin Nuvi 200 Mounting Accessories  All Countries  Tilt swivel mount.

Click Image to enlarge


Tilt swivel mount.
Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be adjusted in order to avoid light reflection on the screen.

With this tilt swivel mount you can have your PNA installed on the dashboard. You use the original mount that comes with the PNA and press it onto the tilt swivel mount, which you can attach onto the ProClip Mounting Platform. This will give you a firm, neat installation.

Nokia 6233 Passive holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 870082

£ 15.2 incl. Vat
Brodit Nokia 6233 Passive holder  Europe

Click Image to enlarge



When keeping your Nokia 6233 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 6233 when it is in the holder. Accommodates all battery sizes. Attach onto a ProClip Mounting Platform.

Apple iPhone Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875214

£ 24.71 incl. Vat
Brodit Apple iPhone Passive Holder Tilt Swivel  All Countries  Adjustable holder, fits devices with skins.

Click Image to enlarge


Adjustable holder, fits devices with skins.
With your iPhone in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPhone in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Apple iPhone Passive holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 870168

£ 17.45 incl. Vat
Brodit Apple iPhone Passive holder  All Countries

Click Image to enlarge



When keeping your Apple iPhone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Apple iPhone when it is in the holder. Attach onto a ProClip Mounting Platform.

Opel Zafira ProClip Right mount

Stock : 3

Item No. : 603671

£ 15.2 incl. Vat
Brodit Opel Zafira ProClip 05-12 UK Right mount

Click Image to enlarge



The ProClip is a mounting bracket for the Opel Zafira's dashboard. Onto the Proclip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Opel Zafira. Made in black ABS plastic. Comes with detailed instructions.

Suzuki Wagon ProClip Angled mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652842

£ 15.2 incl. Vat
Brodit Suzuki Wagon ProClip 01-05 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Suzuki Wagon's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Suzuki Wagon. Made in black ABS plastic. Comes with detailed instructions.

Alfa Romeo Spider-GTV ProClip Console mount

Stock : 3

Item No. : 630520

£ 15.2 incl. Vat
Brodit Alfa Romeo Spider-GTV ProClip 98-05 All Countries Console mount Adjustable console mount.

Click Image to enlarge


Adjustable console mount.
A ProClip that is adjustable to suit the height of the console in a number of Alfa Romeo Spider-GTV. In most Alfa Romeo Spider-GTV it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.

Holden Insignia ProClip Right mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 604278

£ 15.2 incl. Vat
Brodit Holden Insignia ProClip 09-16 All Countries Right mount

Click Image to enlarge



The ProClip is a mounting bracket for the Holden Insignia's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Holden Insignia. Made in black ABS plastic. Comes with detailed instructions.

Ford Curier ProClip Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 652727

£ 15.2 incl. Vat
Brodit Ford Curier ProClip 01-07 Australia Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Curier's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Curier. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories