Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   icom   Samsung galaxy s8   Brodit iPhone   blackberry   hp 6915   tomtom 720  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 7 Item(s) that match your Search
 

 Brodit ProClip for Vauxhall Antara  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654053

£ 15.20 incl. Vat

Item No. : 654053 for Years 07-16 in UK

The images show the mounting position for the Brodit ProClip for your Vauxhall Antara. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Vauxhall Antara's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Vauxhall Antara. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Antara  - Angled mount

Stock : 2

Item No. : 654054

£ 15.20 incl. Vat

Item No. : 654054 for Years 07-16 in UK

The images show the mounting position for the Brodit ProClip for your Vauxhall Antara. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Vauxhall Antara's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Vauxhall Antara. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Antara  - Headrest mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 810910

£ 38.79 incl. Vat

Item No. : 810910 for Years 07-12 in UK

The images show the mounting position for the Brodit Headrest mount for your Vauxhall Antara. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).



For installation of Tablet DVD and multimedia screens in Vauxhall Antara. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Vauxhall Antara. The installation is quick and will not damage the interior of the Vauxhall Antara.

The head rest screen mount fits a number of Vauxhall Antara, some of them are listed here. Are you missing a model? Measure the head rest in you Vauxhall Antara, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your Vauxhall Antara.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Antara  - Headrest mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 610810

£ 40.87 incl. Vat

Item No. : 610810 for Years 07-10 in UK

The images show the mounting position for the Brodit Headrest mount for your Vauxhall Antara. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

For multimedia-monitors with a vertical slot in back.



For installation of multimedia screens in Vauxhall Antara. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Vauxhall Antara. The installation is quick and will not damage the interior of the Vauxhall Antara.

The head rest screen mount fits a number of Vauxhall Antara, some of them are listed here. Are you missing a model? Measure the head rest in you Vauxhall Antara, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your Vauxhall Antara.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Antara  - Headrest mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 810810

£ 40.87 incl. Vat

Item No. : 810810 for Years 07-16 in UK

The images show the mounting position for the Brodit Headrest mount for your Vauxhall Antara. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

For multimedia-monitors with a vertical slot in back.



For installation of multimedia monitors in Vauxhall Antara. Fits monitors with a vertical slot on the back side. The monitor mount is placed onto a front seat's headrest. It comes with a tilt swivel so the monitor can be adjusted in order to avoid reflection. It's easy to take the monitor with you when leaving the Vauxhall Antara. The installation is quick and will not damage the interior of the Vauxhall Antara.

The headrest monitor mount fits a number of Vauxhall Antara, some of them are listed here. Are you missing a model? Measure the headrest in you Vauxhall Antara, if its minimum inner size is 95 mm and maximum outer size is 155 mm, this product will fit your Vauxhall Antara.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Antara  - Headrest mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 810711

£ 47.52 incl. Vat

Item No. : 810711 for Years 07-16 in UK

The images show the mounting position for the Brodit Headrest mount for your Vauxhall Antara. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 95 mm, Max. outer size 155 mm.



The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Vauxhall Antara, some of them are listed below. Are you missing a model? Measure the headrest in your Vauxhall Antara, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

Customers Also Viewed

Acura RL Headrest mount Headrest mount

Stock : 1

Item No. : 810820

£ 40.87 incl. Vat
Brodit Acura RL Headrest mount 05-13 USA Headrest mount For multimedia-monitors with a vertical slot in back.

Click Image to enlarge


For multimedia-monitors with a vertical slot in back.
For installation of multimedia screens in Acura RL. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Acura RL. The installation is quick and will not damage the interior of the Acura RL.

The head rest screen mount fits a number of Acura RL, some of them are listed here. Are you missing a model? Measure the head rest in you Acura RL, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Acura RL.

Nextbase SDV185S (8-5inch) Headrest mount 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 810920

£ 38.79 incl. Vat
Brodit Nextbase SDV185S (8-5inch) Headrest mount  All Countries  For multimedia-monitors with a hole underneath for thumb screw attachment (

Click Image to enlarge


For multimedia-monitors with a hole underneath for thumb screw attachment ("-thread).
For installation of Tablet DVD and multimedia screens in vehicles. Fits screens with a hole underneath for thumb screw attachment ("-thread). The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the vehicle. The installation is quick and will not damage the interior of the vehicle.

The head rest screen mount fits a number of vehicles, some of them are listed here. Are you missing a model? Measure the head rest in you vehicle, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your vehicle.

Nokia 6500 Slide Passive holder 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 870199

£ 16.49 incl. Vat
Brodit Nokia 6500 Slide Passive holder  All Countries

Click Image to enlarge



When keeping your Nokia 6500 Slide in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 6500 Slide when it is in the holder. Attach onto a ProClip Mounting Platform.

Nokia 6300 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875131

£ 24.71 incl. Vat
Brodit Nokia 6300 Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



When keeping your Nokia 6300 in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 6300 when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Brodit Accessories Mounting Accessories 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215159

£ 14.73 incl. Vat
Brodit Brodit Accessories Mounting Accessories  All Countries  Mounting plate for tablet PC, touch screens etc. 110 X 70 mm.

Click Image to enlarge


Mounting plate for tablet PC, touch screens etc. 110 X 70 mm.
Mounting plate for installation of Tablet PCs, touch screens etc. Consists of one back piece and one front piece. Comes with adhesive tape on the back.

HTC Desire Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512141

£ 43.72 incl. Vat
Brodit HTC Desire Active Holder  Tilt Swivel  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the unit in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Nokia Lumia 900 Passive holder with tilt swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511380

£ 24.71 incl. Vat
Brodit Nokia Lumia 900 Passive holder with tilt swivel   All Countries

Click Image to enlarge



When keeping your Nokia in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

Apple iPhone 4 Holder with Pass-Through Connector 

Stock : 1

Item No. : 516164

£ 61.77 incl. Vat
Brodit Apple iPhone 4 Holder with Pass-Through Connector  All Countries  Padded.

Click Image to enlarge


Padded.
Fits for all cables! A holder that provides a neat, firm installation for many areas of use. All cables that can be used with the iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the iPhone each time you put it in the holder. (Cable not included)

Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone without skin and without Apple original Bumper (does NOT fit for iPhone with skin or Apple original Bumper).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Apple iPhone 5 Holder for Cable Attachment 

Stock : 1

Item No. : 514435

£ 40.87 incl. Vat
Brodit Apple iPhone 5 Holder for Cable Attachment   All Countries  Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 59-63 mm, Thickness: 6-10 mm. <span class = 'lightning' >For use with Apple original Lightning to USB Cable.</span>

Click Image to enlarge


Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 59-63 mm, Thickness: 6-10 mm. For use with Apple original Lightning to USB Cable.
This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB Cable (Apple article. no. MD818ZM/A. You can charge you iPhone by connecting it to the car's USB socket, or use it with a USB/cig-plug adapter for the car's 12V socket.

In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder. Fits devices with slim sized skins (not "standard" or rugged size). Fits devices with skin that has the following dimensions: Width: 59-63 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Apple iPhone 6 Passive holder with tilt swivel 

Stock : 6

Item No. : 511660

£ 24.71 incl. Vat
Brodit Apple iPhone 6 Passive holder with tilt swivel  All Countries  Padded.

Click Image to enlarge


Padded.
Keep your iPhone 6 in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone 6 is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 6 without skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories