| |
Brodit ProClip for Vauxhall Nova - Console mount
Stock : 1 - 3 [ call to confirm ]
|
Item No. : 630510 for Years 84-92 in UK |
|
|
|
The images show the mounting position for the Brodit ProClip for your Vauxhall Nova. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.
|
|
Adjustable console mount.
A ProClip that is adjustable to suit the height of the console in a number of Vauxhall Nova. In most Vauxhall Nova it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
|
|
|
|
|
|
| |
Brodit ProClip for Vauxhall Nova - Console mount
Stock : 1 - 3 [ call to confirm ]
|
Item No. : 630515 for Years 84-92 in UK |
|
|
|
The images show the mounting position for the Brodit ProClip for your Vauxhall Nova. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.
|
|
Adjustable console mount with tilt swivel.
A ProClip with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of Vauxhall Nova. In most Vauxhall Nova it is placed on the left side of the console. The ProClip has been tested to fit perfectly in the listed car models. (If you are installing the ProClip in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
|
|
|
|
|
|
| |
Brodit ProClip for Vauxhall Nova - Center mount
Stock : 1 - 3 [ call to confirm ]
|
Item No. : 651583 for Years 84-92 in UK |
|
|
|
The images show the mounting position for the Brodit ProClip for your Vauxhall Nova. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.
|
|
The ProClip is a mounting bracket for the Vauxhall Nova's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Vauxhall Nova. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
|
|
|
|
|
|
Brodit Accessories Adapter Cable
Stock : 1 - 3 [ call to confirm ]
Item No. : 945054
£ 12.99 incl. Vat
Click Image to enlarge
Molex Pin 4 adaptor to Mini USB.
|
|
Motorola RAZR V3x Active Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 961660
£ 35.99 incl. Vat
Click Image to enlarge
With tilt swivel.
The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
|
HP iPAQ hx47xx Holder with speaker
Stock : 1 - 3 [ call to confirm ]
Item No. : 994621
£ 91.99 incl. Vat
Click Image to enlarge
Active holder for fixed installation. With 2 Amps/Molex charger and tilt swivel.
Active holder for fixed installation, with speaker. The holder has a straight cable with open end for fixed installation and a cable with Molex adapter system. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.
You can choose to use the holder as an active holder only for charging, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for data transfer, power supply of a GPS receiver or other own solutions.
12/24 Volt. The power cable is to be connected over a 1,5 A fuse (power supply is required in order for the amplifier to function). 2 A charger. Professional installation recommended. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
|
|
Nokia N70 Holder For Cable Connection
Stock : 1
Item No. : 905044
£ 31.99 incl. Vat
Click Image to enlarge
For Nokia cable CA-27, CA-76 (included in handsfree kit CK7W, CK-20W).
Holder with cable plug attachment. To be used with Nokia original Ca-27, CA-76 cable (included in CK-7W, CK-20W car kit unit). The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your Nokia in the holder so you do not have to connect it manually each time. (Cable not included)
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
|
|
|
Compaq iPAQ 38xx Active Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 968529
£ 35.99 incl. Vat
Click Image to enlarge
For expansion pack with 2 PCMCIA slots.
The active holder charges your battery when it is in the holder. The charging device connects to the Compaq iPAQ 38xx automatically when you put the Compaq iPAQ 38xx in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
|
Nokia N95 Active Holder Tilt Swivel
Stock : 1
Item No. : 965156
£ 35.99 incl. Vat
Click Image to enlarge
With cig-plug.
The active holder charges your battery when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.
|
|
Volvo S40 ProClip Angled mount
Stock : 1 - 3 [ call to confirm ]
Item No. : 652825
£ 16.99 incl. Vat
Click Image to enlarge
The ProClip is a mounting bracket for the Volvo S40's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo S40. Made in black ABS plastic. Comes with detailed instructions.
|
|
Creative ZEN VisionM 30GB Passive Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 848668
£ 25.99 incl. Vat
Click Image to enlarge
The digital music players are small but holds hours and hours of music. Keep your digital music player in a holder attached to a ProClip Mounting Platform, always within easy reach in the vehicle! The holders are designed with a tilt swivel for easy adjustment of your unit in order to avoid light reflection on the screen.
|
|
Motorola 535 Passive Holder Tilt Swivel
Stock : 1 - 3 [ call to confirm ]
Item No. : 848916
£ 25.99 incl. Vat
Click Image to enlarge
With your phone in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the phone in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the phone when it is in the holder.
|
|
