Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
i   nokia   apple   htc   audi   motorola   bmw   ipod   tomtom   fiat   blackberry   hp 6915   942044   audi a3   htc touch   iphone 4   ford   ford mondeo   iPad   xc60   iPhone 3g   galaxy s 1900   diamond   icom   ipod classic 80gb  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Browse Accessories by

Brand

Category

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 9 Item(s) that match your Search
 

 Brodit ProClip for Vauxhall Vectra C  - Right mount

Stock : 1

Item No. : 603078

£ 15.99 incl. Vat

Item No. : 603078 for Years 02-10 in UK

The images show the mounting position for the Brodit ProClip for your Vauxhall Vectra C. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Vauxhall Vectra C's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Vauxhall Vectra C. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Vectra C  - Console mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 633079

£ 15.99 incl. Vat

Item No. : 633079 for Years 02-05 in UK

The images show the mounting position for the Brodit ProClip for your Vauxhall Vectra C. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Vauxhall Vectra C's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Vauxhall Vectra C. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Vectra C  - Console mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 633678

£ 15.99 incl. Vat

Item No. : 633678 for Years 06-10 in UK

The images show the mounting position for the Brodit ProClip for your Vauxhall Vectra C. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Vauxhall Vectra C's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Vauxhall Vectra C. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Vectra C  - Center mount

Stock : 2

Item No. : 653076

£ 15.99 incl. Vat

Item No. : 653076 for Years 02-10 in UK

The images show the mounting position for the Brodit ProClip for your Vauxhall Vectra C. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Vauxhall Vectra C's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Vauxhall Vectra C. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Vectra C  - Angled mount

Stock : 1

Item No. : 653077

£ 15.99 incl. Vat

Item No. : 653077 for Years 02-10 in UK

The images show the mounting position for the Brodit ProClip for your Vauxhall Vectra C. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Vauxhall Vectra C's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Vauxhall Vectra C. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Vauxhall Vectra C  - Headrest mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 810721

£ 37.99 incl. Vat

Item No. : 810721 for Years 02-10 in UK

The images show the mounting position for the Brodit Headrest mount for your Vauxhall Vectra C. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.



The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included.

Is your car missing?
This headrest mount fits a number of Vauxhall Vectra C, some of them are listed below. Are you missing a model? Measure the headrest in your Vauxhall Vectra C, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.


Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Full Brodit Proclip Search 

Customers Also Viewed

Renault Megane ProClip Angled mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 653056

£ 15.99 incl. Vat
Brodit Renault Megane ProClip 00-02 Australia Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Renault Megane's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Renault Megane. Made in black ABS plastic. Comes with detailed instructions.

Toyota Corolla Verso ProClip Center mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 653477

£ 15.99 incl. Vat
Brodit Toyota Corolla Verso ProClip 04-09 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Toyota Corolla Verso's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Corolla Verso. Made in black ABS plastic. Comes with detailed instructions.

BMW 1-series ProClip Center mount

Stock : 7

Item No. : 653523

£ 15.99 incl. Vat
Brodit BMW 1-series ProClip 05-13 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the BMW 1-series's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the BMW 1-series. Made in black ABS plastic. Comes with detailed instructions.

iMate SP3i Passive Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 848975

£ 24.99 incl. Vat
Brodit iMate SP3i Passive Holder Tilt Swivel  All Countries

Click Image to enlarge



With your phone in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the phone in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the phone when it is in the holder.

Ford Mondeo ProClip Center mount

Stock : 4

Item No. : 652011

£ 15.99 incl. Vat
Brodit Ford Mondeo ProClip 93-96 UK Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Ford Mondeo's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Ford Mondeo. Made in black ABS plastic. Comes with detailed instructions.

Volkswagen Golf V ProClip Center mount

Stock : 1 - 3 [ call to confirm ]

Item No. : 653358

£ 15.99 incl. Vat
Brodit Volkswagen Golf V ProClip 04-06 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Volkswagen Golf V's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Golf V. Made in black ABS plastic. Comes with detailed instructions.

Volkswagen Passat ProClip Center mount

Stock : 4

Item No. : 653603

£ 15.99 incl. Vat
Brodit Volkswagen Passat ProClip 05-14 All Countries Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Volkswagen Passat's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Passat. Made in black ABS plastic. Comes with detailed instructions.

Honda Civic ProClip Angled mount

Stock : 2

Item No. : 653733

£ 15.99 incl. Vat
Brodit Honda Civic ProClip 06-11 All Countries Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Honda Civic's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Honda Civic. Made in black ABS plastic. Comes with detailed instructions.

iMate SP3i Active Holder Tilt Swivel 

Stock : 1 - 3 [ call to confirm ]

Item No. : 968975

£ 34.99 incl. Vat
Brodit iMate SP3i Active Holder  Tilt Swivel  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
Are you using your smartphone for navigation? Then you should keep your unit in an active holder attached onto the dashboard in your vehicle! There are active holders with cigarette lighter plug or for fixed installation. The holders are attached onto a tilt swivel, so you can adjust them in order to avoid light reflection in the display. 12/24 Volt.

Attach the holder onto a ProClip Mounting Platform and you will always have your phone within easy reach. Safe and convenient!

Holden Corsa ProClip Angled mount

Stock : 4

Item No. : 653956

£ 15.99 incl. Vat
Brodit Holden Corsa ProClip 07-08 Australia Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Holden Corsa's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Holden Corsa. Made in black ABS plastic. Comes with detailed instructions.

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories