Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   sun visor   audi a3   942044   ford mondeo   xc60   iphone 4   Samsung Galaxy S8   iPad   i e href   Samsung galaxy s8   icom   Brodit iPhone   blackberry   i h  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 11 Item(s) that match your Search
 

 Brodit ProClip for Volkswagen Golf VII  - Right mount

Stock : 2

Item No. : 604855

£ 15.20 incl. Vat

Item No. : 604855 for Years 13-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Volkswagen Golf VII. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volkswagen Golf VII's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Golf VII. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Volkswagen Golf VII  - Center mount

Stock : 4

Item No. : 654889

£ 15.20 incl. Vat

Item No. : 654889 for Years 13-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Volkswagen Golf VII. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volkswagen Golf VII's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Golf VII. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Volkswagen Golf VII  - Angled mount

Stock : 7

Item No. : 655238

£ 15.20 incl. Vat

Item No. : 655238 for Years 13-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Volkswagen Golf VII. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket that you attach onto the Volkswagen Golf VII's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!

The ProClip has a perfect fit, it is custom made for each Volkswagen Golf VII to ensure a secure base for installations. And the ProClip is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.

View demo video


Full Brodit Proclip Search 

 

 Brodit ProClip for Volkswagen Golf VII  - Left mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 804855

£ 15.20 incl. Vat

Item No. : 804855 for Years 13-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Volkswagen Golf VII. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volkswagen Golf VII's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Golf VII. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Volkswagen Golf VII  - Angled mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854854

£ 15.20 incl. Vat

Item No. : 854854 for Years 13-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Volkswagen Golf VII. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volkswagen Golf VII's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Golf VII. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Volkswagen Golf VII  - Center mount

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No. : 854889

£ 15.20 incl. Vat

Item No. : 854889 for Years 13-16 in All Countries

The images show the mounting position for the Brodit ProClip for your Volkswagen Golf VII. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volkswagen Golf VII's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient - always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Golf VII. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

TomTom One 3rd Edition Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215201

£ 43.72 incl. Vat
Brodit TomTom One 3rd Edition Active Holder  Tilt Swivel  All Countries  With tilt swivel.

Click Image to enlarge


With tilt swivel.
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Apple iPhone 4 Passive Holder Tilt Swivel 

Stock : 1

Item No. : 511165

£ 24.71 incl. Vat
Brodit Apple iPhone 4 Passive Holder Tilt Swivel  All Countries  Adjustable holder. Fits devices with skin (NOT for Apple original Bumper).

Click Image to enlarge


Adjustable holder. Fits devices with skin (NOT for Apple original Bumper).
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of black ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 4 with skin (does NOT fit for iPhone without skin or with Apple original Bumper.)

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Apple iPhone 5 Active holder with cig-plug. 

Stock : 2

Item No. : 521504

£ 66.54 incl. Vat
Brodit Apple iPhone 5 Active holder with cig-plug.   All Countries  With tilt swivel. With USB cable. Apple approved charging cable. Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm.

Click Image to enlarge


With tilt swivel. With USB cable. Apple approved charging cable. Adjustable Holder. Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm.
Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is made of ABS plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.

Fits devices with "rugged" sized skins (not standard or slim size). Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Samsung Galaxy S III Mini GT-i8190 Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 512466

£ 43.72 incl. Vat
Brodit Samsung Galaxy S III Mini GT-i8190 Active holder with cig-plug.   All Countries  With Cigarette Lighter Cable.

Click Image to enlarge


With Cigarette Lighter Cable.
The active holder charges your smartphone when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Apple iPhone 5 Passive holder with tilt swivel 

Stock : 5

Item No. : 511422

£ 24.71 incl. Vat
Brodit Apple iPhone 5 Passive holder with tilt swivel  All Countries  Padded.

Click Image to enlarge


Padded.
Keep your iPhone 5 in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone 5 is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 5 without skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

Volkswagen Eos ProClip Angled mount

Stock : 5

Item No. : 653359

£ 15.2 incl. Vat
Brodit Volkswagen Eos ProClip 07-11 UK Angled mount

Click Image to enlarge



The ProClip is a mounting bracket for the Volkswagen Eos's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volkswagen Eos. Made in black ABS plastic. Comes with detailed instructions.

Apple iPhone 5 Holder for Cable Attachment 

Stock : 6

Item No. : 514422

£ 38.01 incl. Vat
Brodit Apple iPhone 5 Holder for Cable Attachment   All Countries  <span class = 'lightning' >For use with Apple original Lightning to USB Cable.</span> With tilt swivel. Padded

Click Image to enlarge


For use with Apple original Lightning to USB Cable. With tilt swivel. Padded
This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it connects automatically to your iPhone every time you place the device in the holder.
Note! Cable not included.The cable attachment holder can be combined with Apple original Lightning to USB Cable (Apple article. no. MD818ZM/A. You can charge you iPhone by connecting it to the car's USB socket, or use it with a USB/cig-plug adapter for the car's 12V socket.

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 5 without skin.

The holder is equipped with a tilt swivel. It means you can easily adjust the angle or your device in order to avoid light reflection on the screen. It also allows you to switch between portrait and landscape mode in a second. Attach onto ProClip mounting platform and you will always have your iPhone within easy sight and reach while on the road.

Toyota Yaris ProClip Center mount

Stock : 2

Item No. : 654723

£ 15.2 incl. Vat
Brodit Toyota Yaris ProClip 12-14 UK Center mount

Click Image to enlarge



The ProClip is a mounting bracket for the Toyota Yaris's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Yaris. Made in black ABS plastic. Comes with detailed instructions.

Apple iPhone 5 Passive holder with tilt swivel 

Stock : 7

Item No. : 511430

£ 28.51 incl. Vat
Brodit Apple iPhone 5 Passive holder with tilt swivel   All Countries  Adjustable holder. Fits devices with skin that has the following dimensions: 62-77 mm, Thickness: 9-13 mm.

Click Image to enlarge


Adjustable holder. Fits devices with skin that has the following dimensions: 62-77 mm, Thickness: 9-13 mm.
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.

In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.

Fits devices with rugged sized skins (not "standard" or slim size). Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 9-13 mm. (May fit for skins thicker than 13 mm, depending on shape/design of the edges).

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

TomTom GO LIVE 1005 Active Dock Holder with Tilt Swivel 

Stock : 1

Item No. : 215466

£ 47.52 incl. Vat
Brodit TomTom GO LIVE 1005 Active Dock Holder with Tilt Swivel   All Countries

Click Image to enlarge



Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach!

If you want charging to your TomTom when it is held in place in the Active Dock, you can connect an angled mini USB charging cable, item no. 942650. (942650 can not be used for TMC).

The original TomTom charging cable that is enclosed when you buy the device can not be connected to the Active Dock. The Active Dock is equipped with a mini USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. (Cable not included.)

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories