Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   audi a3   Samsung Galaxy Nexus   942044   ford mondeo   xc60   iphone 4   iPad   sun visor   icom   Brodit iPhone   Samsung Galaxy S8   blackberry   tomtom 720   iPhone 7   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount
We Found 32 Item(s) that match your Search
 

 Brodit ProClip for Volvo XC60  - Right mount

Stock : 2

Item No. : 604258

£ 15.20 incl. Vat

Item No. : 604258 for Years 09-17 in All Countries

The images show the mounting position for the Brodit ProClip for your Volvo XC60. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volvo XC60's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo XC60. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Volvo XC60  - Console mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 635343

£ 15.20 incl. Vat

Item No. : 635343 for Years -1 in All Countries

The images show the mounting position for the Brodit ProClip for your Volvo XC60. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



Keep your device within easy sight and reach in your car! The ProClip makes it easier and safer to use handheld devices in vehicles. The ProClip is a mounting bracket that you attach to the dashboard of your car. Onto the ProClip, you can install any accessory, e.g. a holder for mobile phone or other communication device.

The ProClip is car specific, it is customized for each car model and has a perfect fit. The ProClip offers a firm mounting platform and is available in multiple positions for most vehicles. Discreet design that blends in well with the interior. Safe, neat and convenient!

The ProClip is easy to install, you can do it in a minute! You simply snap the ProClip into place in gaps in the interior, you do not need to drill holes or use special tools or dismantle the dashboard. Detailed mounting instructions included. The ProClip has predrilled AMPS holes for easy installation of a holder. Made of high grade ABS/Acetal plastic. Color: Black. Developed and produced in Sweden.

- Do you want to be able to switch between several holders on the same ProClip? Please see Brodits MultiMoveClip.
- Are you installing larger devices or heavier equipment? Please see Brodits Extra Strength Mounting Platforms and Pedestal Mounts.


Full Brodit Proclip Search 

 

 Brodit ProClip for Volvo XC60  - Center mount

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654256

£ 15.20 incl. Vat

Item No. : 654256 for Years 09-10 in All Countries

The images show the mounting position for the Brodit ProClip for your Volvo XC60. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volvo XC60's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo XC60. Made in black ABS plastic. Comes with detailed instructions.

This ProClip can not be combined with item no 654259, both of them can not be installed in the same time in one Volvo XC60.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Volvo XC60  - Angled mount High

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654257

£ 15.20 incl. Vat

Item No. : 654257 for Years 09-10 in All Countries

The images show the mounting position for the Brodit ProClip for your Volvo XC60. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volvo XC60's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo XC60. Made in black ABS plastic. Comes with detailed instructions.

NOTE: This ProClip can NOT be installed together with other ProClips that are placed by the left air vent (item no 654625 and 654611).


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Volvo XC60  - Center mount High

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 654259

£ 15.20 incl. Vat

Item No. : 654259 for Years 09-13 in All Countries

The images show the mounting position for the Brodit ProClip for your Volvo XC60. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.

NOT for models with factory navigation.



The ProClip is a mounting bracket for the Volvo XC60's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo XC60. Made in black ABS plastic. Comes with detailed instructions.

This ProClip can not be combined with item no 654256, both of them can not be installed in the same time in one Volvo XC60.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

 

 Brodit ProClip for Volvo XC60  - Angled mount

Stock : 2

Item No. : 654296

£ 15.20 incl. Vat

Item No. : 654296 for Years 09-10 in All Countries

The images show the mounting position for the Brodit ProClip for your Volvo XC60. Onto this you can then attach the Brodit Active or Brodit Passive Holder as shown in the video.



The ProClip is a mounting bracket for the Volvo XC60's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Volvo XC60. Made in black ABS plastic. Comes with detailed instructions.


Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Full Brodit Proclip Search 

Customers Also Viewed

BlackBerry Bold Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 968850

£ 33.95 incl. Vat
Brodit BlackBerry Bold Active Holder  Tilt Swivel  All Countries  With cig-plug.

Click Image to enlarge


With cig-plug.
The active holder charges your battery when it is in the holder. You need to connect the charging device to the device manually each time you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.

Brodit Accessories Mounting equipment 

Stock : 2

Item No. : 213005

£ 12.34 incl. Vat
Brodit Brodit Accessories Mounting equipment  All Countries  MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.

Click Image to enlarge


MoveClip Mini. 2 female + 1 male. 50 x 35 x 4 mm.
Allows you to move your equipment between vehicles e.g. holder, HF-kit etc, or to easily switch between two units. Comes with adhesive tape on the back, consists of two back pieces and one front piece.

Apple iPod Touch 2nd Generation Holder for Cable Attachment 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 846861

£ 47.52 incl. Vat
Brodit Apple iPod Touch 2nd Generation Holder for Cable Attachment  All Countries  For Griffin PowerJolt cable. Padded.

Click Image to enlarge


For Griffin PowerJolt cable. Padded.
Holder with connector attachment. The choice for you who often connect a connector to your device. The connector is easy to attach to the holder, and then it connectos to the device automatically when you put your device in the holder so you do not have to connect it manually each time. (Connector not included).

Not for PowerJolt SE. The holder Fits only the old Griffin PowerJolt cable with release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder.

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Apple iPhone Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 875214

£ 24.71 incl. Vat
Brodit Apple iPhone Passive Holder Tilt Swivel  All Countries  Adjustable holder, fits devices with skins.

Click Image to enlarge


Adjustable holder, fits devices with skins.
With your iPhone in a holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the iPhone in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.

Navigon 3300 Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 272028

£ 24.71 incl. Vat
Brodit Navigon 3300 Passive Holder Tilt Swivel   All Countries

Click Image to enlarge



The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

TomTom One 3rd Edition Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215189

£ 61.77 incl. Vat
Brodit TomTom One 3rd Edition Active Holder  Tilt Swivel  All Countries  With tilt swivel. 12/24 Volt, 2 A charger.

Click Image to enlarge


With tilt swivel. 12/24 Volt, 2 A charger.
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

Nokia 6710 Navigator Passive Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 511062

£ 24.24 incl. Vat
Brodit Nokia 6710 Navigator Passive Holder Tilt Swivel   All Countries

Click Image to enlarge



When keeping your Nokia 6710 Navigator in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the Nokia 6710 Navigator when it is in the holder.The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

TomTom One XL Active Holder Tilt Swivel 

Stock : Stock on Order - delivery approx. 7-10 days

Item No. : 215252

£ 61.77 incl. Vat
Brodit TomTom One XL Active Holder  Tilt Swivel  All Countries  With tilt swivel. 12/24 Volt, 2 A charger.

Click Image to enlarge


With tilt swivel. 12/24 Volt, 2 A charger.
The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder for fixed installation. Gives a neat installation without loose cables. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Fits devices with a TMC module. (TMC module not included).

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS

All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories