Brodit Samsung Galaxy A3 (2017) Active holder for fixed installation
Stock : 3
Item No : 527947
£62.09 incl. Vat
With tilt swivel. 12V/2A
Use an active holder for your Galaxy A3 (2017) on the road and you will always have a freshly charged battery! In addition, you will always have your Galaxy A3 (2017) within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your Galaxy A3 (2017) is held securely in place in an upright position for maximum cellular reception.
When you place the Galaxy A3 (2017) in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.
The holder is made of ABS and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.
Dimensions: 70 x 95 x 47 mm (W x H x D mm) Weight: 168 g Cable length: Total length: 398 cm (Holder to box: 145 cm, Connectors+box 10 cm, Box to open end: 243 cm.)
Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.
Brodit Samsung Galaxy A3 (2017) Passive holder with tilt swivel
Stock : 1
Item No : 511947
£24.24 incl. Vat
When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.
Dimensions: 72 x 77 x 47 mm (W x H x D mm) Weight: 54 g
Brodit Samsung Galaxy Xcover 4 Active holder with USB-cable
Stock : Stock on Order - delivery approx. 7-10 days
Item No : 521958
£60.14 incl. Vat
With USB-cable with cig-plug adapter. With tilt swivel.
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car. Fits only devices without the included back cover on.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.
Important note! In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
Dimensions: 79 x 102 x 50 mm (W x H x D mm) Weight: 131 g Cable length (+connector with plug 60 mm): 149 cm
Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.
Brodit Samsung Galaxy Xcover 4 Active holder with cig-plug
Stock : Stock on Order - delivery approx. 7-10 days
Item No : 512958
£43.64 incl. Vat
With tilt swivel.
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With cig-plug cable, 2A charging via the Micro-USB connector. You can charge a second device via the USB A outlet in the cig-plug, 1A charging. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the phone in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle. Fits only devices without the included back cover on.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.
Dimensions: 79 x 102 x 50 mm (W x H x D mm) Weight: 139 g Cable length (+plug 76 mm): 58 cm, stretched:80 cm (or a bit more if needed).
Charging specifications: Input voltage: DC/10-30V Charging voltage: DC/4.75-5.25V Output current(Typ): 2.0A LED charging indicator: Power on. Operating temperature: 0°C ~ +40°C Storage temperature: -20°C ~ +60°C Approvals: E, CE, FCC, ROHS
Brodit Samsung Galaxy Xcover 4 Active holder with USB-cable
Stock : Stock on Order - delivery approx. 7-10 days
Item No : 521958
£60.14 incl. Vat
With USB-cable with cig-plug adapter. With tilt swivel.
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car. Fits only devices without the included back cover on.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.
Important note! In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
Dimensions: 79 x 102 x 50 mm (W x H x D mm) Weight: 131 g Cable length (+connector with plug 60 mm): 149 cm
Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.
Brodit Samsung Galaxy Xcover 4 Active holder for fixed installation
Stock : Stock on Order - delivery approx. 7-10 days
Item No : 513958
£89.24 incl. Vat
With Molex adapter system. 2A charger. With tilt swivel.
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. For fixed installation. The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the phone in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle. Fits only devices without the included back cover on.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto ProClip Mounting Platform.
Dimensions: 79 x 102 x 50 mm (W x H x D mm) Weight: 198 g Cable length: Total length: 241 cm (Holder to box: 70 cm, Connectors+box 14 cm, Box to open end: 157 cm.)
Charging specifications: Input voltage: DC/10-30V Charging voltage: DC/4.75-5.3V Output current(Typ): 2.0A Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red) Operating temperature: 0°C ~ +40°C Storage temperature: -20°C ~ +80°C Approvals: E, CE, FCC, ROHS.
Stock : Stock on Order - delivery approx. 7-10 days
Item No : 511958
£24.24 incl. Vat
Keep your phone in a passive holder and you will always have it within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. You have full access to the camera and all buttons and outlets when the device is in the holder. You can connect a charging cable or portable handsfree to the device when it is in the holder. Fits only devices without the included back cover on.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.
Dimensions: 79 x 80 x 50 mm (W x H x D mm) Weight: 66 g
Brodit Samsung Galaxy S8 Plus Active holder for fixed installation
Stock : 7
Item No : 527967
£62.65 incl. Vat
With tilt swivel. 12V/2A
Use an active holder for your Samsung Galaxy S8 Plus on the road and you will always have a freshly charged battery! In addition, you will always have your Samsung Galaxy S8 Plus within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your Samsung Galaxy S8 Plus is held securely in place in an upright position for maximum cellular reception.
When you place the Samsung Galaxy S8 Plus in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.
The holder is made of ABS and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 20° in each direction. Attach onto ProClip Mounting Platform.
Dimensions: 78 x 100 x 45 mm (W x H x D mm) Weight: 177 g Cable length: Total length: 473 cm (Holder to box: 146 cm, Connectors+box 80 mm, Box to open end: 247 cm.)
Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.
Brodit Samsung Galaxy S8 Active holder for fixed installation
Stock : 3
Item No : 527966
£62.65 incl. Vat
With tilt swivel. 12V/2A
Use an active holder for your Samsung Galaxy S8 on the road and you will always have a freshly charged battery! In addition, you will always have your Samsung Galaxy S8 within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your Samsung Galaxy S8 is held securely in place in an upright position for maximum cellular reception.
When you place the Samsung Galaxy S8 in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.
The holder is made of ABS and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 20° in each direction. Attach onto ProClip Mounting Platform.
Dimensions: 72 x 95 x 45 mm (W x H x D mm) Weight: 173 g Cable length: Total length: 397 cm (Holder to box: 145 cm, Connectors+box 80 mm, Box to open end: 244 cm.)
Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.
Brodit Samsung Galaxy S8 Plus Active holder with USB-cable
Stock : 5
Item No : 521967
£60.37 incl. Vat
With USB-cable with cig-plug adapter. With tilt swivel.
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car. Fits only devices without the included back cover on.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.
Important note! In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
Dimensions: 78 x 100 x 45 mm (W x H x D mm) Weight: 120 g Cable length (+connector with plug 60 mm): 154 cm
Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.
