Brodit ProClip and Holders - Dedicated UK Supplier

DSL Developments UK Dedicated Supplier of Active Holders and Passive Holders which attach to the Professional ProClip Dashboard Mount

Shopping Cart

brodit tracking Learn about our SMS Shipment Alert service

Brodit Search + Buy

 
apple   nokia   htc   bmw   audi   motorola   ford   ipod   tomtom   fiat   Samsung Galaxy Nexus   audi a3   942044   ford mondeo   xc60   iphone 4   sun visor   iPad   icom   Samsung Galaxy S8   Brodit iPhone   blackberry   tomtom 720   iPhone 7   iPhone 7s  

Most Popular Views

Today
Week
Month

Two Step Solution

brodit Proclip
Watch the Video

Search + Buy all available Brodit Products

Brodit PDA Holder Search Brodit Phone Holder Search Brodit Sat Nav Holder Search Brodit MP3 Holder Search Brodit ProClip Holder Search Brodit Suction Mount

1006 items found that match your criteria.

Brodit Apple iPhone 5 Active holder with cig-plug. 

Stock : 1

Item No : 521501

£66.54 incl. Vat
Brodit 521501 Active holder with cig-plug. For Apple iPhone 5 Car Kit Holder Mount
Enlarge image

 With tilt swivel. With USB cable. Apple approved charging cable. Padded.
  Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
 
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.
 
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.


Brodit Apple iPhone 5 Active holder with cig-plug. 

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 521500

£76.04 incl. Vat
Brodit 521500 Active holder with cig-plug. For Apple iPhone 5 Car Kit Holder Mount
Enlarge image

 With tilt swivel. With USB cable. Apple approved charging cable. Fits devices with skin.
  Use an active holder for your Apple device on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception.
 
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the device in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The holder is made of black plastic and has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle.
 
This holder fits devices with "standard" sized skins, not rugged or extra thick skins or skins with details sticking out.
 
The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

  Attached to a ProClip mount, this car kit charges the batteries of most PDA's when placed in the cradle. Connecting the PDA to the cradles charging device is a snap. Simply place the PDA in the cradle and connect. That's it! This car kit is conveniently powered by the vehicles cigarette lighter socket and allows you to remove the mount easily, especially when switching vehicles. The tilt swivel of the cradle allows you to position the device to avoid the suns glare and to give you easier access to the device while driving. The ability to be hands free while this powerful cradle grips the device is essential in hard city driving or plowing down rural pitted farm roads.


Brodit Apple iPad New (3rd Gen) Holder with external antenna connection 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 544404

£115.42 incl. Vat
Brodit 544404 Holder with external antenna connection For Apple iPad New (3rd Gen) Car Kit Holder Mount
Enlarge image

 Passive holder with tilt swivel.
  Brodit's holder with external antenna connection provides a considerably better and more reliable Apple iPad New (3rd Gen) coverage. Works both in rural as in urban areas, in vehicles and in buildings.
 
Attach an external antenna onto your vehicle or in your window and connect it to the antenna cable attached to the holder (external antenna is not included). The external antenna will pick up on even the faintest signal, too weak to be recognized by your iPad. The signal is then transmitted wirelessly to your iPad via the built-in inductive antenna. It can take a while for your iPad to find the signal after placing it in the holder (maximum 1 minute). You can connect e.g. a charging cable to the iPad when it is in the holder.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 


Brodit Apple iPad 2 Holder with external antenna connection 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 544404

£115.42 incl. Vat
Brodit 544404 Holder with external antenna connection For Apple iPad 2 Car Kit Holder Mount
Enlarge image

 Passive holder with tilt swivel.
  Brodit's holder with external antenna connection provides a considerably better and more reliable Apple iPad 2 coverage. Works both in rural as in urban areas, in vehicles and in buildings.
 
Attach an external antenna onto your vehicle or in your window and connect it to the antenna cable attached to the holder (external antenna is not included). The external antenna will pick up on even the faintest signal, too weak to be recognized by your iPad. The signal is then transmitted wirelessly to your iPad via the built-in inductive antenna. It can take a while for your iPad to find the signal after placing it in the holder (maximum 1 minute). You can connect e.g. a charging cable to the iPad when it is in the holder.
 
The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

 


Brodit Apple iPad Mini Holder with lock. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 514459

£66.54 incl. Vat
Brodit 514459 Holder with lock. For Apple iPad Mini Car Kit Holder Mount
Enlarge image

 For cable attachment, for use with Apple original Lightning to 30-pin Adapter Cable. With tilt swivel. 2 keys included.
  This holder for cable attachment is to be used when you want to secure your iPad and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount. The holder is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. Made of extra strong plastic and equipped with a lock. In order to remove the iPad from the holder you need the key, two keys are included. Mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

The holder can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.
 
Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to 30-pin Adapter Cable (Apple article. no. MD824ZM/A).
 
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
Crash Test film!
 

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!


Brodit Apple iPad Mini Holder with lock. 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 514458

£66.54 incl. Vat
Brodit 514458 Holder with lock. For Apple iPad Mini Car Kit Holder Mount
Enlarge image

 For cable attachment, for use with Apple original Lightning to USB Cable. With tilt swivel. 2 keys included.
  The choice when you want to secure your iPad and still have it easy accessable. The holder is crashtested and approved for use on Brodit's headrest mount. The holder is also perfect for use in stores, at exhibitions and any place where you want to use your iPad without having it easy removable. Made of extra strong plastic and equipped with a lock. In order to remove the iPad from the holder you need the key, two keys are included.  The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode.

The holder can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.
 
Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB Adapter Cable (Apple article. no. MD818ZM/A).
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
 
Crash Test film!
 

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!


Brodit Apple iPad Mini Holder for Cable Attachment 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 514450

£57.02 incl. Vat
Brodit 514450 Holder for Cable Attachment For Apple iPad Mini Car Kit Holder Mount
Enlarge image

 For use with Apple original Lightning to USB Cable. With tilt swivel. Griffin USB/cig-plug adapter included.
  This holder for cable attachment can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB Adapter Cable (Apple article. no. MD818ZM/A.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Mini phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!


Brodit Apple iPad Mini Holder for Cable Attachment 

Stock : Brodit Brand New Item - PreOrder Yours NOW !

Item No : 514449

£47.52 incl. Vat
Brodit 514449 Holder for Cable Attachment For Apple iPad Mini Car Kit Holder Mount
Enlarge image

 For use with Apple original Lightning to 30-pin Adapter Cable.
  This holder for cable attachment can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to 30-pin Adapter Cable (Apple article. no. MD824ZM/A.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Mini phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!


Brodit Apple iPad Mini Holder for Cable Attachment 

Stock : Stock on Order - delivery approx. 7-10 days

Item No : 514448

£47.52 incl. Vat
Brodit 514448 Holder for Cable Attachment For Apple iPad Mini Car Kit Holder Mount
Enlarge image

 For use with Apple original Lightning to USB Cable. With tilt swivel.
  This holder for cable attachment can, combined with an Apple cable, be used for charging your iPad. First you mount the cable into place onto the holder, then it connects automatically to your iPad every time you place the device in the holder.

Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB Adapter Cable (Apple article. no. MD818ZM/A.

The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen.

Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls. ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like Apple iPad Mini phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Connecting your PDA to your GPS unit has never been simpler! Having your PDA, MP3, Motorola or even your iPAQ secured in a cradle is a necessity when navigating from your GPS and using this car kit has made this task even safer. While having the cable mounted to the cradle, not only gives you excellent visual sight of the screen, but lessens the usual bumping about and the possibility of the cable coming loose when you are knee deep in lost and have to have the unit connected. Connecting the attachment cable (not included) to the car kit makes this cradle ideal to instantly connect your PDA directly to the cable every time. No more manual connections or fumbling with tangled wires - this cable attachment is easily mounted to a ProClip Mounting Platform making it ideal for those of us who like to plug in and go!


Brodit Apple iPad New 4th Gen MultiStand 

Stock : 1

Item No : 215520

£47.52 incl. Vat
Brodit 215520 MultiStand For Apple iPad New 4th Gen Car Kit Holder Mount
Enlarge image

 Mounting Adapter and Screws Included. With spring stud locking. For OtterBox Defender Series.
  When using the MultiStand it is easier to carry the iPad around with you. Convenient to use anywhere at home, in the car or in the office. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.
 
You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.
 
You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).
 
Tablets should not be installed onto a car's dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car's dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
 
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.

  Extra sturdy and extra strong are just a few words people have been using to describe this passive car kit cradle. This holder is mounted on a tilt swivel system keeping your device within easy reach and gripped by a cradle so super strong, your device will stay put even on the most cobbled of city streets. The tilt swivel system allows you to position your mobile to avoid the suns rays, reducing the glare allowing for a brighter more visible screen. Once mounted, this kit should accommodate all battery sizes and is easily attached onto a ProClip Mounting Platform. We have designed the holder to accept the charging cable to allow you to charge your device while it is in the cradle. Some holders allow your device to be in the cradle in a vertical, closed, open or horizontal position. This is the most secure car kit you have ever tried.


All Mount Menu

Secure Payments by


Feedback

Bluetooth/Navigation

Modaco CamerAware Speed Camera Warning System PocketPC Smartphone
idapt I3 I2 Universal Desktop Charger
Parrot Bluetooth Car Kits Nokia Car Kits
brodit

Accessories