Brodit ProClip and Holders - Dedicated UK Supplier

02-07 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Audi S4 Cabriolet. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Audi S4 Cabriolet. The installation is quick and will not damage the interior of the Audi S4 Cabriolet.

The head rest screen mount fits a number of Audi S4 Cabriolet, some of them are listed here. Are you missing a model? Measure the head rest in you Audi S4 Cabriolet, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Audi S4 Cabriolet.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Audi  S4 Cabriolet Brodit Proclip Fitting Instructions

95-15 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Audi S4 Avant. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Audi S4 Avant. The installation is quick and will not damage the interior of the Audi S4 Avant.

The head rest screen mount fits a number of Audi S4 Avant, some of them are listed here. Are you missing a model? Measure the head rest in you Audi S4 Avant, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Audi S4 Avant.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Audi  S4 Avant Brodit Proclip Fitting Instructions

02-07 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Audi A4 Cabriolet. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Audi A4 Cabriolet. The installation is quick and will not damage the interior of the Audi A4 Cabriolet.

The head rest screen mount fits a number of Audi A4 Cabriolet, some of them are listed here. Are you missing a model? Measure the head rest in you Audi A4 Cabriolet, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Audi A4 Cabriolet.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Audi  A4 Cabriolet Brodit Proclip Fitting Instructions

95-15 For multimedia-monitors with a vertical slot in back.
  For installation of multimedia screens in Audi A4 Avant. Fits screens with a vertical slot on the back side. The screen mount is placed onto a front seat's head rest. It comes with a tilt swivel so the screen can be adjusted in order to avoid reflection. It's easy to take the screen with you when leaving the Audi A4 Avant. The installation is quick and will not damage the interior of the Audi A4 Avant.

The head rest screen mount fits a number of Audi A4 Avant, some of them are listed here. Are you missing a model? Measure the head rest in you Audi A4 Avant, if its minimum inner size is 123 mm and maximum outer size is 183 mm, this product will fit your Audi A4 Avant.

  Installing your Nextbase SDV 1102 or other multimedia monitor screen has never been easier! The mounting car kit is easily attached to the headrest and will not damage the interiors material. Once attached, the car kit acts as a cradle for the monitor allowing easy installation and removal so that you can move the monitor from one vehicle to another or simply to remove it completely when not in use. Once the monitor is placed in the mount, the flexible arm or the tilt swivel, allows the monitor to be adjusted in any position for your viewing pleasure. The flexible arm of this multimedia car kit is a long 27cm giving you ample maneuverability of the monitor in any position.

Audi  A4 Avant Brodit Proclip Fitting Instructions

08-15 
  ProClip ar en monteringsbygel som monteras på bilens instrumentbrada. På ProClip kan du montera t ex en hållare till mobiltelefonen eller handdatorn. Trafiksakert och bekvamt -du har alltid din mobiltelefon, handdator etc. inom bekvamt rackhåll. ProClip ar speciellt utformad till varje bilmodell och går snabbt och latt att montera. Monteringen skadar inte bilens inredning och du behöver inga specialverktyg. Tillverkad i svart ABS-plast. Monteringsanvisning medföljer.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Audi  S4 Sedan Brodit Proclip Fitting Instructions

08-09 
  The ProClip is a mounting bracket for the Audi S4 Sedan's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi S4 Sedan. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Audi  S4 Sedan Brodit Proclip Fitting Instructions

08-15 NOTICE: Visually inspect your dash to match our photos. This ProcClip is only for the style of CD player shown.
  The ProClip is a mounting bracket for the Audi S4 Avant's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi S4 Avant. Made in black ABS plastic. Comes with detailed instructions.

  Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.

Audi  S4 Avant Brodit Proclip Fitting Instructions

02-07 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Audi S4 Cabriolet, some of them are listed below. Are you missing a model? Measure the headrest in your Audi S4 Cabriolet, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 

Audi  S4 Cabriolet Brodit Proclip Fitting Instructions

95-15 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Audi S4 Avant, some of them are listed below. Are you missing a model? Measure the headrest in your Audi S4 Avant, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 

Audi  S4 Avant Brodit Proclip Fitting Instructions

12-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
  Note! Two-part solution.
 
Model specific two-part solution
Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
 
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
 
Is your car missing?
This headrest mount fits a number of Audi Q3, some of them are listed below. Are you missing a model? Measure the headrest in your Audi Q3, if it matches the measurements below this product will fit in your car.
Minimum inner size between headrest bars: 95 mm.
Maximum outer size between headrest bars: 155 mm.

 

Audi  Q3 Brodit Proclip Fitting Instructions