Brodit Audi A4 Cabriolet Headrest mount Headrest mount
Stock : 3
Item No : 811020
£47.52 incl. Vat
02-07 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Note! Two-part solution.
Model specific two-part solution Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
Is your car missing? This headrest mount fits a number of Audi A4 Cabriolet, some of them are listed below. Are you missing a model? Measure the headrest in your Audi A4 Cabriolet, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
Brodit Audi A4 Avant Headrest mount Headrest mount
Stock : 3
Item No : 811020
£47.52 incl. Vat
95-15 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Note! Two-part solution.
Model specific two-part solution Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
Is your car missing? This headrest mount fits a number of Audi A4 Avant, some of them are listed below. Are you missing a model? Measure the headrest in your Audi A4 Avant, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
Stock : Stock on Order - delivery approx. 7-10 days
Item No : 604738
£15.20 incl. Vat
12-16
The ProClip is a mounting bracket for the Audi Q3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi Q3. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
Stock : Brodit Brand New Item - PreOrder Yours NOW !
Item No : 804738
£15.20 incl. Vat
12-16
The ProClip is a mounting bracket for the Audi Q3's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi Q3. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
07-12 ACE Metal Bracket. This is the only Bracket Mount available for the Audi TT for UK Audi TT.
The ACE Bracket is a mounting bracket for the Audi TT's dashboard. Onto the ACE Bracket you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ACE Bracket is car specific. Comes with detailed instructions. May require professional installation or dealer help.
Stock : Stock on Order - delivery approx. 7-10 days
Item No : 634565
£15.20 incl. Vat
11-16
The ProClip is a mounting bracket for the Audi A6's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A6. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
11-16 NOT for wood grain panel.
The ProClip is a mounting bracket for the Audi A6's dashboard. Onto the ProClip you can install e.g. a holder for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Audi A6. Made in black ABS plastic. Comes with detailed instructions.
Whether mounted on the console or on the dashboard, the ProClip car kit affords you the ability to install these car kit mounts using no special tools or dismantling of the dashboard. The designs of these mounts are made to cradle any device while tested to fit perfectly in the vehicles listed. These hard ABS plastic units hold your PDA, Mobile or GPS unit allowing you to run down the most pitted city streets without the fear of your device falling out of the cradle and rolling around the floorboards. Other customers have purchased other equipment (sold separately) used with the kits which includes additional mounting equipment, multimedia equipment, charging cables and handsfree kits. Other attachments (sold separately) also include Trion's Maxi Mute, VDA Cables, Water Resistant Cases and Voltage Converters.
Brodit Audi S4 Sedan Headrest mount Headrest mount
Stock : 3
Item No : 811020
£47.52 incl. Vat
95-15 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Note! Two-part solution.
Model specific two-part solution Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
Is your car missing? This headrest mount fits a number of Audi S4 Sedan, some of them are listed below. Are you missing a model? Measure the headrest in your Audi S4 Sedan, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
01-16 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Note! Two-part solution.
Model specific two-part solution Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
Is your car missing? This headrest mount fits a number of Audi S3, some of them are listed below. Are you missing a model? Measure the headrest in your Audi S3, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.
01-14 Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm.
Note! Two-part solution.
Model specific two-part solution Brodit's headrest mount is car specific and works as a mounting platform. You will also need a holder for the unit you wish to mount. You can easily find holders to install by using the device search feature on our website. All Brodit's holders can be attached onto the headrest mount, but some holders for surfpads are crash tested and approved for use on Brodit's headrest mount (look for crash test labeling).
The headrest mount is to be placed onto the front seat's headrest. You can install it yourself in a couple of minutes, installation instructions are included. The face plate of the headrest mount has predrilled holes which makes the attachment of a holder easier.
Is your car missing? This headrest mount fits a number of Audi A3, some of them are listed below. Are you missing a model? Measure the headrest in your Audi A3, if it matches the measurements below this product will fit in your car. Minimum inner size between headrest bars: 95 mm. Maximum outer size between headrest bars: 155 mm.